Search OEDI Data

Showing results 201 - 225 of 520.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Research Areas
Accessibility
Data Type
Organization
Source
"Geostationary Satellite Retrievals with Irradiances and Cloud Properties / Processed Data"×
Wind Energy×

Radar ESRL Wind Profiler with RASS, Wasco Airport Derived Data

**Overview** Profiles of turbulence dissipation rate for 15-minute intervals, time-stamped at the beginning of the 15-minute period, during the final 30 minutes of each hour. During that time, the 915-MHz wind profiling radar was in an optimized configuration with a vertically po...
McCaffrey, K. Wind Energy Technologies Office (WETO)
Oct 12, 2015
1 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence L Raw Data

**Overview** Sequence L: Step AOA, Parked (P) This sequence was designed to quantify the 3-D blade static angle-of-attack response in the absence of rotational influences by varying the blade pitch angle. This test sequence used an upwind, rigid turbine with a 0° cone angle. Wi...
Fingersh, L. Wind Energy Technologies Office (WETO)
Nov 28, 2018
1 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence X Raw Data

**Overview** Sequence X: Elevated RPM (F) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 12 m/s, and yaw angles of ±30° were obtained. The blade pitch angle was 3°. The rotor rotated at 90 RPM. Blade pressure measur...
Fingersh, L. Wind Energy Technologies Office (WETO)
Nov 29, 2018
1 Resources
0 Stars
Publicly accessible

PNNL LIDAR Halo Streamline XR+ (1) pre-campaign / Raw Data

**Overview** This is a pre-campaign instrument deployment. With it, we aim to upload data and test/verify the ingest pipeline. **Data Quality** Adding signal-to-noise ratio can exclude data based on this value.
Newsom, R. Wind Energy Technologies Office (WETO)
Feb 23, 2021
1 Resources
0 Stars
Publicly accessible

LLNL LIDAR Halo Streamline XR+ pre-campaign / Proc Data

**Overview** This is a pre-campaign instrument deployment. With it, we aim to upload data and test/verify the ingest pipeline. **Data Quality** Adding signal-to-noise ratio can exclude data based on this value.
Newsom, R. Wind Energy Technologies Office (WETO)
Jan 02, 2022
1 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence 6 Raw Data

**Overview** Sequence 6: Shroud Wake Measure (P) This test sequence used a downwind, rigid turbine with a 3.4° cone angle. The wind speeds for this sequence corresponded to subcritical [7 m/s], transitional [15 m/s], and supercritical [20 m/s] Reynolds number regimes for the ci...
Fingersh, L. Wind Energy Technologies Office (WETO)
Nov 28, 2018
1 Resources
0 Stars
Publicly accessible

OC6 Phase Ia Nonlinear hydrodynamic loading validation dataset

**Overview** Two validation campaigns were examined within the Offshore Code Comparison Collaboration, Continued, with Correlation and unCertainty (OC6) Phase 1 project to examine the modeling tools' underprediction of loads and motion of a floating wind semisubmersible (semi) at...
Robertson, A. Wind Energy Technologies Office (WETO)
Aug 08, 2021
1 Resources
0 Stars
Publicly accessible

Additional Data Focused on Phase 1 Geared Toward Computational Fluid Dynamics (CFD) validation

**Overview** A new validation campaign was developed within the Offshore Code Comparison Collaboration, Continued, with Correlation and unCertainty (OC6) to better understand the complex interactions between components of a floating wind system (e.g., columns, pontoons, etc.) in ...
Robertson, A. Wind Energy Technologies Office (WETO)
Apr 08, 2021
1 Resources
0 Stars
Publicly accessible

Surface Meteorological Station PNNL 3m Tower, Physics site-8 Reviewed Data

**Overview** In support of the Wind Forecasting Improvement Project, Pacific Northwest National Laboratory (PNNL) deployed surface meteorological stations in Oregon. **Data Details** A PNNL computer is used as the base station to download the meteorological data acquired by the...
Berg, L. Wind Energy Technologies Office (WETO)
Feb 14, 2016
1 Resources
0 Stars
Publicly accessible

Sodar NREL Scintec MFAS Wind Profiler, Decker Ranch Airstrip Raw Data

**Overview** The dataset includes 15-minute average wind speed and direction records from 30 m to 330 m above ground level (AGL) in 10-m range gates. Data were collected by a Scintec MFAS wind profiler installed at the Decker Ranch in Oregon, about 4.4 km southeast of Kent, Ore.,...
Jager, D. and Scott, G. Wind Energy Technologies Office (WETO)
Oct 27, 2015
1 Resources
0 Stars
Publicly accessible

Sodar NREL Scintec MFAS Wind Profiler, Decker Ranch Airstrip Reviewed Data

**Overview** The dataset includes 15-minute average wind speed and direction records from 30 m to 330 m above ground level (AGL) in 10-m range gates. Data were collected by a Scintec MFAS wind profiler installed at the Decker Ranch in Oregon, about 4.4 km southeast of Kent, Ore.,...
Jager, D. and Scott, G. Wind Energy Technologies Office (WETO)
Nov 19, 2015
1 Resources
0 Stars
Publicly accessible

Lidar CU WindCube V1 Profiler, Troutdale Reviewed Data

**Overview** These profiling lidar datasets collect profiles of wind speed and wind direction from nominally 40 m above the surface to 220 m above the surface, depending on visibility. **Data Quality** Only data points with CNR 22 dB are included in these 2-min averaged files.
Lundquist, J. Wind Energy Technologies Office (WETO)
Nov 19, 2015
1 Resources
0 Stars
Publicly accessible

Lidar CU WindCube V1 Profiler, Wasco Airport Reviewed Data

**Overview** These profiling lidar datasets collect profiles of wind speed and wind direction from nominally 40 m above the surface to 220 m above the surface, depending on visibility. **Data Quality** Only data points with CNR 22 dB are included in these 2-min averaged files.
Lundquist, J. Wind Energy Technologies Office (WETO)
Feb 22, 2016
1 Resources
0 Stars
Publicly accessible

Lidar CU WindCube V2 Profiler, Gordons Ridge Reviewed Data

**Overview** These profiling lidar datasets collect profiles of wind speed and wind direction from nominally 40 m above the surface to 220 m above the surface, depending on visibility. **Data Quality** Only data points with CNR 22 dB are included in these 2-min averaged files.
Lundquist, J. Wind Energy Technologies Office (WETO)
Nov 15, 2015
1 Resources
0 Stars
Publicly accessible

United States Land-based Wind Supply Curves 2023

This data packet contains supply curves, hourly generation profiles, and a composite siting exclusion TIFF for land-based wind across the contiguous United States. The supply curves offer comprehensive metrics such as capacity (MW), generation (MWh), levelized cost of energy (LCOE...
GDS, N. National Renewable Energy Laboratory
Jun 30, 2023
13 Resources
0 Stars
Publicly accessible

wfip2.model/realtime.hrrr_esrl.graphics.01

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...
Macduff, M. Wind Energy Technologies Office (WETO)
Dec 14, 2015
1 Resources
0 Stars
Publicly accessible

wfip2.model/refcst.02.fcst.02

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...
Macduff, M. Wind Energy Technologies Office (WETO)
Jan 31, 2016
1 Resources
0 Stars
Publicly accessible

wfip2.model/refcstext.02.fcst.01

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...
Macduff, M. Wind Energy Technologies Office (WETO)
Feb 09, 2016
1 Resources
0 Stars
Publicly accessible

wfip2.model/refcstext.02.fcst.02

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...
Macduff, M. Wind Energy Technologies Office (WETO)
Feb 09, 2016
1 Resources
0 Stars
Publicly accessible

wfip2.model/realtime.hrrr_wfip2.icbc.02

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...
Macduff, M. Wind Energy Technologies Office (WETO)
Dec 01, 2015
1 Resources
0 Stars
Publicly accessible

wfip2.model/refcstext.01.fcst.02

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...
Macduff, M. Wind Energy Technologies Office (WETO)
Feb 09, 2016
1 Resources
0 Stars
Publicly accessible

wfip2.model/realtime.hrrr_esrl.icbc.01

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...
Macduff, M. Wind Energy Technologies Office (WETO)
Dec 01, 2015
1 Resources
0 Stars
Publicly accessible

wfip2.model/realtime.rap_esrl.icbc.01

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...
Macduff, M. Wind Energy Technologies Office (WETO)
Nov 19, 2015
1 Resources
0 Stars
Publicly accessible

wfip2.model/refcst.01.fcst.01

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...
Macduff, M. Wind Energy Technologies Office (WETO)
Jan 31, 2016
1 Resources
0 Stars
Publicly accessible

wfip2.model/refcst.01.fcst.02

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...
Macduff, M. Wind Energy Technologies Office (WETO)
Jan 31, 2016
1 Resources
0 Stars
Publicly accessible
<< Previous45678910111213Next >>