Search OEDI Data

Utah FORGE: Roosevelt Hot Springs Analytical Well-Based Temperature Model Data

This submission contains a cumulative record of one-dimensional temperature modeling based off of well data in the vicinity of the Utah FORGE site. Temperature log data from wells used, and in some cases were extrapolated below the bottom of a number of wells. The data were corre...

Podgorney, R. and Allis, R. Idaho National Laboratory

Dec 07, 2018
2 Resources
0 Stars
Publicly accessible

GeoRePORT Case Studies Coso, WSMR, Dixie Valley, and Chena Hot Springs

The Geothermal Resource Portfolio Optimization and Reporting Technique (GeoRePORT) was developed with funding from the U.S. Department of Energy Geothermal Technologies Office to assist in identifying and pursuing long-term investment strategies through the development of a resour...

Kolker, A. et al National Renewable Energy Laboratory

Sep 30, 2019
6 Resources
0 Stars
Publicly accessible

County-Level Hourly Renewable Capacity Factor Dataset for the ReEDS Model

This dataset contains hourly capacity factors for each renewable resource class and region (in this case, county). Technologies like large-scale utility PV (UPV), onshore wind, offshore wind, and concentrating solar power (CSP) are included. The dataset contains 7 years of hourly ...

Cole, W. et al National Renewable Energy Laboratory (NREL)

Aug 01, 2023
5 Resources
2 Stars
Publicly accessible

Wind Turbine Water Setbacks: Ordinances (2022) and Extrapolated Trends, 115 Hub Height 170 Rotor Diameter

This dataset represents wind energy setback requirements from water based on existing county ordinances as of April 2022. A setback requirement is a minimum distance from water that an energy project may be developed, and these varied widely across the counties in which they exist...

Geospatial Data Science, N. and Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)

Jan 01, 2024
5 Resources
0 Stars
Publicly accessible

United States Land-based Wind Representative Profiles 2007-2013 & 2015-2023

This data packet contains hourly generation profiles (representative profiles) for land-based wind across the contiguous United States. Hourly representative generation profiles are available for each reV supply curve site (~53,000 sites) which represents about 11.5 KM x 11.5 KM s...

Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)

Jun 16, 2025
20 Resources
0 Stars
Publicly accessible

Nevada Great Basin Play Fairway Analysis Regional Data

This project focused on defining geothermal play fairways and development of a detailed geothermal potential map of a large transect across the Great Basin region (96,000 km2), with the primary objective of facilitating discovery of commercial-grade, blind geothermal fields (i.e. ...

Faulds, J. Nevada Bureau of Mines and Geology

Oct 28, 2015
47 Resources
0 Stars
Publicly accessible

Training dataset and results for geothermal exploration artificial intelligence, applied to Brady Hot Springs and Desert Peak

The submission includes the labeled datasets, as ESRI Grid files (.gri, .grd) used for training and classification results for our machine leaning model: brady_som_output.gri, brady_som_output.grd, brady_som_output.* desert_som_output.gri, desert_som_output.grd, desert_som_outpu...

Moraga, J. et al Colorado School of Mines

Sep 01, 2020
16 Resources
0 Stars
Publicly accessible

Mini-Split Heat Pump Evaluation and Zero Energy Ready Home Support

This project was created from a partnership between the U.S. Department of Energy's (DOE's) Building America research team, IBACOS, Inc., and a production builder of high-performance homes called Imagine Homes, which is located in San Antonio, Texas-a hot-humid climate. The primar...

Rapport, A. and Herk, A. Ibacos Innovation

Apr 27, 2016
5 Resources
0 Stars
Publicly accessible

Bradys Hot Springs Ambient Noise Correlation Functions (Initial Waveforms)

These files are ambient noise correlation (ANC) functions calculated for 11 days of continuous seismic data recorded by the Lawrence Berkeley network in the Brady geothermal field. These are SAC formatted seismic waveforms. The stations included are BPB04, BPB05, BPB07, BPB08, BP...

Matzel, E. Lawrence Livermore National Laboratory

Jul 01, 2015
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 X-ray Diffraction Data

This submission contains x-ray diffraction data taken from 3,600 to 10,987 feet deep in well 16A(78)-32 in the Roosevelt Hot Springs Geothermal Area as part of the Utah FORGE project. 78 rock samples were taken. Samples are taken in a range of ten feet at 100 foot increments. Mine...

Jones, C. Energy and Geoscience Institute at the University of Utah

Jul 29, 2021
1 Resources
0 Stars
Publicly accessible

Geothermal Geodatabase for Rico Hot Springs Area and Lemon Hot Springs, Dolores and San Miguel Counties, Colorado

This geodatabase was built to cover several geothermal targets developed by Flint Geothermal in 2012 during a search for high-temperature systems that could be exploited for electric power development. Several of the thermal springs have geochemistry and geothermometry values indi...

Zehner, R. Flint Geothermal, LLC

Nov 01, 2012
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Updated Phase 2C Well Location Coordinates

Utah FORGE has been established to develop, test, and improve the technologies and techniques required to develop EGS-type geothermal resources. Drilling of the first of two deep deviated wells, 16A(78)-32, will begin in the second half of 2020. This well will serve as the injecti...

Hardwick, C. Utah Geological Survey

Dec 07, 2020
1 Resources
0 Stars
Publicly accessible

Subsurface Characterization and Machine Learning Predictions at Brady Hot Springs Results

Geothermal power plants typically show decreasing heat and power production rates over time. Mitigation strategies include optimizing the management of existing wells increasing or decreasing the fluid flow rates across the wells and drilling new wells at appropriate locations. Th...

Beckers, K. et al National Renewable Energy Laboratory

Oct 20, 2021
6 Resources
0 Stars
Publicly accessible

Utah FORGE: Final Topical Report 2018

This is the final topical report for the Phase 2B Utah FORGE project, which is located near Roosevelt Hot Springs, Utah. This PDF format report details results associated with the conceptual geologic model, deep well 58-32, rock geomechanics, reservoir temperatures, seismic survey...

Moore, J. et al Energy and Geoscience Institute at the University of Utah

Apr 07, 2018
2 Resources
0 Stars
Publicly accessible

Solar Row Zero Energy Townhomes Boulder, CO

Wonderland Development has constructed a new "near zero energy" row home design in North Boulder consisting of 9 units: one 5-plex and two duplexes. NREL has performed short-term tests and installed long-term monitoring equipment in three of these units. Two of these units used a ...

Norton, P. et al National Renewable Energy Laboratory

Sep 27, 2016
11 Resources
0 Stars
Publicly accessible

TEAMER: Techno-Economic Assessment of AWS Waveswing

The submitted information includes the final report and the supporting datasets in Excel format. Submitted data includes: an Excel based techno-economic model with input-output (IO) analysis, costing functions in generalized form, performance metrics and computation, and scatte...

Previsic, M. Re Vision Consulting

Mar 07, 2025
3 Resources
0 Stars
Publicly accessible

PoroTomo Project: Brady's Geothermal Field, Station BRAD

Files with links to RINEX files for station BRAD not previously reported

Kreemer, C. University of Wisconsin

Jan 04, 2016
1 Resources
0 Stars
Publicly accessible

PoroTomo Project: Brady's Field, Station BRDY

Files with links to RINEX files for station BRDY not previously reported

Kreemer, C. University of Wisconsin

Jan 04, 2016
1 Resources
0 Stars
Publicly accessible

Western USA Assessment of High Value Materials in Geothermal Fluids and Produced Fluids Final Report

This report documents the results of investigations dealing with the concentrations and availabilities of strategic, critical and valuable materials (SCVM) in produced waters from geothermal and hydrocarbon reservoirs (50-250 degrees C) in Idaho, Nevada, New Mexico, Oregon, and Ut...

Simmons, S. Energy and Geoscience Institute at the University of Utah

Mar 18, 2019
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Simplified Discrete Fracture Network Data

The FORGE team is making these fracture models available to researchers wanting a set of natural fractures in the FORGE reservoir for use in their own modeling work. They have been used to predict stimulation distances during hydraulic stimulation at the open toe section of well 1...

Finnila, A. Golder Associates Inc.

Jun 01, 2021
3 Resources
0 Stars
Publicly accessible

2024 County-Level Hourly Renewable Capacity Factor Dataset for the ReEDS Model

This dataset contains hourly capacity factors for each renewable resource class and region (in this case, county). Technologies like large-scale utility PV (UPV), onshore (land-based) wind, offshore wind, and concentrating solar power (CSP) are included. Hourly profiles are provid...

Sergi, B. et al National Renewable Energy Laboratory (NREL)

Mar 25, 2025
9 Resources
0 Stars
Publicly accessible

Brady's Geothermal Field Seismic Network Metadata

Brady's geothermal field seismic network station locations and dates of operation.

Foxall, W. University of Wisconsin

Dec 21, 2014
1 Resources
0 Stars
Publicly accessible

Brady's Field GPS Time-Series Data

Daily position time-series for GPS station BRAD and BRDY in the NA12 reference frame.

Kreemer, C. University of Nevada

Dec 20, 2014
1 Resources
0 Stars
Publicly accessible

Geothermal Direct-Use Installations in the United States

An updated database of geothermal direct-use systems in the U.S. has been compiled and analyzed, building upon the Oregon Institute of Technology (OIT) Geo-Heat Center direct-use database. Types of direct-use applications examined include hot springs resorts and pools, aquaculture...