Search OEDI Data
Showing results 126 - 150 of 163.
Show
results per page.
Order by:
Available Now:
Research Areas
Accessibility
Data Type
Organization
Source
Utah FORGE: Pump and Probe Test on a Mated Fracture Westerly Granite Sample
This dataset contains results from a pump and probe experiment conducted on a mated fracture Westerly Granite sample with a diameter of 1 inch and a height of 2 7/8 inches. The experiment was performed within an aluminum triaxial pressure vessel (TEMCO) to investigate the non-line...
Klinghammer, H. et al Pennsylvania State University
May 19, 2024
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Modeled Hourly Tidal Current Velocities, Directions, and Heights from May 1 September 1, 2005 at Two Points Near East Forelands and Tyonek in Cook Inlet, Alaska
This dataset includes modeled tidal current velocities, direction and depth at two locations in East and North Forelands (60.716, 151.434 and 61.024, 151.157) near Nikiski and Tyonek, respectively, in Cook Inlet, Alaska. Data from two grid cells were provided by the Pacific Northw...
Bond, B. et al University of Alaska Fairbanks
Oct 05, 2022
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
UAE6 Wind Tunnel Tests Data UAE6 Sequence 8 Raw Data
**Overview**
Sequences 8 and 9: Downwind Sonics (F,P) and Downwind Sonics Parked
(P)
This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged
from 5 m/s to 25 m/s. Yaw angles of 0° to 60° were achieved. The blade tip pitch was 3°. The
roto...
Fingersh, L. Wind Energy Technologies Office (WETO)
Nov 28, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
UAE6 Wind Tunnel Tests Data UAE6 Sequence 9 Raw Data
**Overview**
Sequences 8 and 9: Downwind Sonics (F,P) and Downwind Sonics Parked
(P)
This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged
from 5 m/s to 25 m/s. Yaw angles of 0° to 60° were achieved. The blade tip pitch was 3°. The
roto...
Fingersh, L. Wind Energy Technologies Office (WETO)
Nov 28, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Ceilometer ND Ceilometer, Wasco Airport Raw Data
**Overview**
Measurements of cloud base height and vertical visibility using pulsed infrared (910 nm) diode laser LIDAR technology. The instrument can detect up to three cloud layers simultaneously.
**Data Details**
Measurements taken in the standard measuring mode, where the C...
Fernando, J. et al Wind Energy Technologies Office (WETO)
Jan 14, 2015
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
NREL GIS Data: U.S. Atlantic Coast Offshore Windspeed 90m Height High Resolution
This dataset is a geographic shapefile generated from the original raster data. The original raster data resolution is a 200-meter cell size. The data provide an estimate of annual average wind speed at 90 meter height above surface for specific offshore regions of the United Stat...
Wood, J. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation
2 Resources
0 Stars
In curation
Sodar NREL Scintec MFAS Wind Profiler, Decker Ranch Airstrip Raw Data
**Overview**
The dataset includes 15-minute average wind speed and direction records from 30 m to 330 m above ground level (AGL) in 10-m range gates. Data were collected by a Scintec MFAS wind profiler installed at the Decker Ranch in Oregon, about 4.4 km southeast of Kent, Ore.,...
Jager, D. and Scott, G. Wind Energy Technologies Office (WETO)
Oct 27, 2015
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Sodar NREL Scintec MFAS Wind Profiler, Decker Ranch Airstrip Reviewed Data
**Overview**
The dataset includes 15-minute average wind speed and direction records from 30 m to 330 m above ground level (AGL) in 10-m range gates. Data were collected by a Scintec MFAS wind profiler installed at the Decker Ranch in Oregon, about 4.4 km southeast of Kent, Ore.,...
Jager, D. and Scott, G. Wind Energy Technologies Office (WETO)
Nov 19, 2015
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: TEM and Gravity Data
This submission includes a gravity data in text format and as a GIS point shapefile and transient electromagnetic (TEM) raw data. Each text file additionally contains location data (UTM Zone 12, NAD83) and elevation (meters) data for that station.
The gravity data shapefile was i...
Hardwick, C. and Nash, G. Energy and Geoscience Institute at the University of Utah
Feb 05, 2018
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
GeoDAWN: Airborne magnetic and radiometric surveys of the northwestern Great Basin, Nevada and California
This submission encompasses the airborne magnetic and radiometric survey data from the northwestern Great Basin in Nevada and California, collected under the GeoDAWN initiative: Geoscience Data Acquisition for Western Nevada. Included in the dataset are all flight details, geophys...
Glen, J. and Earney, T. United States Geological Survey
Mar 01, 2024
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
TEAMER: OSU X Hinsdale & Sandia LUPA Uncertainty Testing
This processed data is from TEAMER testing through RFTS 7 at the O.H. Hinsdale Wave Research Laboratory in Corvallis, Oregon. This testing was conducted by Oregon State University (OSU) and Sandia National Laboratories in October and November 2023. The Laboratory Upgrade Point Abs...
Robertson, B. et al Oregon State University
Oct 19, 2023
6 Resources
0 Stars
Publicly accessible
6 Resources
0 Stars
Publicly accessible
Sodar NREL Scintex SFAS Wind Profiler, Condon Raw Data
**Overview**
The dataset includes 15-minute average wind speed and direction records from 10 m to 250 m above ground level (AGL) in 5-m range gates. Data were collected by a Scintec SFAS wind profiler installed at the Condon State Airport in Oregon, about 1.8 km northeast of the ...
Scott, G. and Jager, D. Wind Energy Technologies Office (WETO)
Nov 19, 2015
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Sodar NREL Scintex SFAS Wind Profiler, Condon Reviewed Data
**Overview**
The dataset includes 15-minute average wind speed and direction records from 10 m to 250 m above ground level (AGL) in 5-m range gates. Data were collected by a Scintec SFAS wind profiler installed at the Condon State Airport in Oregon, about 1.8 km northeast of the ...
Scott, G. and Jager, D. Wind Energy Technologies Office (WETO)
Nov 19, 2015
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
NREL GIS Data: Wisconsin High Resolution Wind Resource
_Abstract:_ Annual average wind resource potential for Wisconsin at a 50 meter height.
_Purpose:_ Provide information on the wind resource development potential in Wisconsin.
_Supplemental Information:_ This data set has been validated by NREL and wind energy meteorologic...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation
2 Resources
0 Stars
In curation
NREL GIS Data: Hawaii High Resolution Wind Resource
_Abstract:_ Annual average wind resource potential for the state of Hawaii at a 50 meter height.
_Purpose:_ Provide information on the wind resource development potential within the state of Hawaii.
_Supplemental Information:_ This data set has been validated by NREL and ...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation
2 Resources
0 Stars
In curation
NREL GIS Data: South Carolina High Resolution Wind Resource
_Abstract:_ Annual average wind resource potential for the state of South Carolina at a 50 meter height.
_Purpose:_ Provide information on the wind resource development potential within the state of South Carolina.
_Supplemental Information:_ This data set has been valida...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation
2 Resources
0 Stars
In curation
NREL GIS Data: Georgia High Resolution Wind Resource
_Abstract:_ Annual average wind resource potential for the state of Georgia at a 50 meter height.
_Purpose:_ Provide information on the wind resource development potential within the state of Georgia.
_Supplemental Information:_ This data set has been validated by NREL an...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation
2 Resources
0 Stars
In curation
Develop and verify soil/structure interaction for pile/foundation interaction
**Overview**
Phase II of the Offshore Code Comparison Collaboration, Continued, with Correlation and unCertainty (OC6) project was used to verify the implementation of a new soil-structure interaction (SSI) model for use within offshore wind turbine modeling software. The REDWIN...
Robertson, A. Wind Energy Technologies Office (WETO)
Jun 02, 2022
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Reference Model 5 Cost Breakdown (RM5: Oscillating Surge Flap)
Contains the Reference Model 5 (RM5) spreadsheets with the cost breakdown structure (CBS) for the levelized cost of energy (LCOE) calculations for a single RM5 device and multiple unit arrays. These spreadsheets are contained within an XLSX file and a spreadsheet editor such as Mi...
Neary, V. et al Sandia National Laboratories
Sep 30, 2014
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Lidar LMCT WTX WindTracer, Gordon Ridge Raw Data
**Overview**
Long-range scanning Doppler lidar located on Gordon Ridge. The WindTracer provides high-resolution, long-range lidar data for use in the WFIP2 program.
**Data Details**
The system is configured to take data in three different modes. All three modes take 15 minutes ...
Barr, K. Wind Energy Technologies Office (WETO)
Nov 19, 2015
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
SMP Preparation, Programming, and Characterization
The problem of loss circulation in geothermal wells is inherently challenging due to high temperatures, brittle rocks, and presence of abundant fractures. Because of the inherent challenges in geothermal environments, there are limitations in selecting proper lost circulation mate...
Salehi, S. et al University of Oklahoma
Oct 01, 2021
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Modeling the Integration of Marine Energy into Microgrids Wave Resource Assessment
This submission has wave resource assessments which were conducted for six locations based on IEC requirements using the DOE WPTO Hindcast data and MHKiT. The locations are chosen to provide varying wave climates and include PacWave South, OR; Wave Energy Testing Site (WETS), HI; ...
Mankle, H. and Robertson, B. University of Alaska Fairbanks
Jan 19, 2023
9 Resources
0 Stars
Publicly accessible
9 Resources
0 Stars
Publicly accessible
Admiralty Inlet Hub-Height Turbulence Measurements from June 2012
This data is from measurements at Admiralty Head, in Admiralty Inlet. The measurements were made using an IMU equipped ADV mounted on a mooring, the 'Tidal Turbulence Mooring' or 'TTM'. The inertial measurements from the IMU allows for removal of mooring motion in post processing....
Kilcher, L. National Renewable Energy Laboratory
Jun 18, 2012
7 Resources
0 Stars
Publicly accessible
7 Resources
0 Stars
Publicly accessible
Bias Corrected NOAA HRRR Wind Resource Data for Grid Integration Applications
To address the need for regularly updated wind resource data, NREL has processed the High-Resolution Rapid Refresh (HRRR) outputs for use in grid integration modeling. The HRRR is an hourly-updated operational forecast product produced by the National Oceanic and Atmospheric Admin...
Buster, G. et al National Renewable Energy Lab (NREL)
Oct 15, 2024
7 Resources
0 Stars
Publicly accessible
7 Resources
0 Stars
Publicly accessible
Reference Model 5 Full Scale Geometry (RM5: Oscillating Surge Flap)
Contains the Reference Model 5 (RM5) full scale geometry files of the Oscillating Surge Flap, developed by the Reference Model Project (RMP). These full scale geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. This data was gen...
Neary, V. et al Sandia National Laboratories
Sep 30, 2014
5 Resources
0 Stars
Publicly accessible
5 Resources
0 Stars
Publicly accessible