Search OEDI Data

Utah FORGE: Well 14-2 Logs and Data from Roosevelt Hot Spring Area

This is a compilation of logs and data from Well 14-2 in the Roosevelt Hot Springs area in Utah. This well is also in the Utah FORGE study area. Data includes: flowmeter survey (1989), geochemistry (1977-1978, 1977-1983), injection test data (1979, 1982), and spinner surveys (19...

Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 03, 2016
1 Resources
0 Stars
Publicly accessible

Wister, CA Downhole and Seismic Data

This submission contains Downhole geophysical logs associated with Wister, CA Wells 12-27 and 85-20. The logs include Spontaneous Potential (SP), HILT Caliper (HCAL), Gamma Ray (GR), Array Induction (AIT), and Neutron Porosity (NPOR) data. Also included are a well log, Injection T...

Akerley, J. Ormat Nevada Inc

Dec 18, 2010
16 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 2C Seismic Observation and Ground Water Well Data and Well Locations

This submission contains the following data associated with Utah FORGE Phase 2C within the Roosevelt Hot Springs geothermal area: An ArcGIS shapefile with well locations for wells 58-32, 78-32, 68-32, OH-3, OH-4, WOW-2, and WOW-3. Well 58-32 is the deep test well, wells 68-32 an...

Abraham, S. et al Energy and Geoscience Institute at the University of Utah

Mar 26, 2019
6 Resources
0 Stars
Publicly accessible

Oregon Direct Use Geothermal Well Data

This excel file provides direct use geothermal data for various wells located in Oregon. Data includes well name, location, heating application, temperature and flow of fluid, capacity, energy use, and load factor. The data is from the State of Oregon Department of Geology and Mi...

Niewendorp, C. Oregon Institute of Technology

Apr 16, 2020
2 Resources
0 Stars
Publicly accessible

Extraction/Injection Well Design for Deep Direct Use at University of Illinois at Urban-Champaign

The large scale Deep Direct Use (DDU) geothermal project in the low temperature environment of the Illinois Basin requires drilling and completing two wells. One well would be the extraction (producing) well and would be built to deliver a flow rate of approximately 6000 barrels ...

Kirksey, J. and Lu, Y. University of Illinois

Mar 31, 2019
1 Resources
0 Stars
Publicly accessible

Deep Sedimentary Basin EGS Development

Stratigraphic reservoirs with high permeability and temperature at economically accessible depths are attractive for power generation because of their large areal extent (> 100 km2) compared to the fault controlled hydrothermal reservoirs (< 10 km2) found throughout much of the we...

Allis, R. and Moore, J. University of Utah

Jan 24, 2013
1 Resources
0 Stars
Publicly accessible

Fallon, NV FORGE well 21-31 Lithology, Mineral, Image Log, and Injection Test data

Attached is 5 datasets collected from Fallon FORGE well 21-31 located in Churchill County, Nevada collected and interpreted between Feburary 2018-January 2020. This submission includes 1) new lithology interpretation derived from petrographic thin sections of sidewall cores taken ...

Kraal, K. and Ayling, B. Sandia National Laboratories

May 30, 2020
5 Resources
0 Stars
Publicly accessible

Penrose Well Temperatures

Penrose Well Temperatures Geothermal waters have been encountered in several wells near Penrose in Fremont County, Colorado. Most of the wells were drilled for oil and gas exploration and, in a few cases, production. This ESRI point shapefile utilizes data from 95 wells in and a...

Christopherson, K. Flint Geothermal, LLC

Mar 15, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Milford Digitized Geophysical Logs from Acord 1

This submission includes digitalized versions of the following: McCulloch Geothermal Corp Acord 1-26 Cover Letter McCulloch Geothermal Corp Acord 1-26 Drilling Plan McCulloch Geothermal Corp Acord 1-26 Bond Documents Division of Water Rights Permission to Drill Drillers Log Geot...

Jones, C. and Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 31, 2016
1 Resources
0 Stars
Publicly accessible

Multi-Sensor Object Detection Data from Infrastructure Sensors Deployed at Traffic Intersections in the City of Colorado Springs, Colorado, USA

The dataset provided here was collected as a part of the US Department of Transportation (USDOT) Strengthening Mobility and Revolutionizing Transportation (SMART) project, where the City of Colorado Springs (Colorado, USA) and National Renewable Energy Laboratory (NREL) collaborat...

Sandhu. . et al National Renewable Energy Laboratory

Mar 11, 2025
6 Resources
0 Stars
Publicly accessible

Brady Geothermal Field Borehole Pressure Data

This submission supersedes pressure data from March 2017 which can be found as a link in the submission resources. This submission contains 3 .csv files with time series pressure data in 3 observation wells at Brady Geothermal Field as part of the PoroTomo project. These pressure ...

Cardiff, M. and Lim, D. University of Wisconsin

Apr 01, 2016
4 Resources
0 Stars
Publicly accessible

Soda Lake Well Lithology Data and Geologic Cross-Sections

Comprehensive catalogue of drill-hole data in spreadsheet, shapefile, and Geosoft database formats. Includes XYZ locations of well heads, year drilled, type of well, operator, total depths, well path data (deviations), lithology logs, and temperature data. Plus, 13 cross-sections...

E., J. University of Nevada

Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Updated Phase 2C Well Location Coordinates

Utah FORGE has been established to develop, test, and improve the technologies and techniques required to develop EGS-type geothermal resources. Drilling of the first of two deep deviated wells, 16A(78)-32, will begin in the second half of 2020. This well will serve as the injecti...

Hardwick, C. Utah Geological Survey

Dec 07, 2020
1 Resources
0 Stars
Publicly accessible

Hydraulic Studies of Drilling Microbores with Supercritical Steam, Nitrogen and Carbon Dioxide

Hydraulic studies of drilling micropores at various depths and with various hole sizes, tubing, fluids and rates to show theoretical feasibility. WELLFLO Simulations Report separated into three parts: Step 4: Drilling 10,000 ft Wells with Supercritical Steam, Nitrogen, and Carbon...

Karaaslan, M. Impact Technologies LLC

Jan 01, 2010
3 Resources
0 Stars
Publicly accessible

EGS Collab: Modeling and Simulation Working Group Teleconference Series (129-130)

This submission contains the presentation slides and recordings from EGS Collab Modeling and Simulation Working Group (MSWG) teleconferences number 129 through 130. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field act...

White, M. et al Pacific Northwest National Laboratory

Jun 22, 2022
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Well Acord 1-26 Logs and Data: Roosevelt Hot Spring Area

This is a compilation of logs and data from Well Acord 1-26 in the Roosevelt Hot Springs area in Utah. This well is also in the Utah FORGE study area. Logs include: mud log (45'-12645'), compensated densilog (1102'-7923', 7900'-12644'), neutron log (1102'-7923'), dual induction ...

Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 03, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Reports on Northwestern Nevada Well Doublet Drilling and Testing by Fervo Energy

These reports review Fervo Energy's construction of a commercial enhanced geothermal system (EGS). Fervo has qualified full functionality of the system through production testing at commercially relevant operating conditions. The project site is located in a nearfield setting ad...

Dadi, S. et al Fervo Energy

Sep 05, 2023
2 Resources
0 Stars
Publicly accessible

3D Model of the San Emidio Geothermal Area

The San Emidio geothermal system is characterized by a left-step in a west-dipping normal fault system that bounds the western side of the Lake Range. The 3D geologic model consists of 5 geologic units and 55 faults. Overlying Jurrassic-Triassic metasedimentary basement is a ~500 ...

E., J. University of Nevada

Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Evaluation of Potential Geochemical Responses to Injection in the FORGE Geothermal Reservoir

Plugging of fracture porosity from mineral precipitation due to injecting cold water into a a geothermal reservoir can impact the overall permeability of the fracture network in the reservoir. This can have serious ramifications on the efficiency of the geothermal resource. Geoche...

Patil, V. and Simmons, S. Energy and Geoscience Institute at the University of Utah

Apr 03, 2019
1 Resources
0 Stars
Publicly accessible

Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Fine Scale Stress Test Modelling

Mesh, properties, initial conditions, injection/withdrawal rates for modelling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from ground for Stockton University reservoir cooling system (aquifer storage cooling system), Galloway, New Jersey, fo...

Smith, J. et al Lawrence Berkeley National Laboratory

Feb 22, 2021
14 Resources
0 Stars
Publicly accessible

Utah FORGE: Earth Model Mesh Data for Selected Surfaces

This submission contains a number of data files with vertices of meshed/interpolated surfaces used in the Phase 2B earth model. Examples include land surface (based on 10-meter DEM), the granitoid-basin fill contact, several faults, and also interpolated temperature isosurfaces f...

Podgorney, R. Idaho National Laboratory

Dec 07, 2018
6 Resources
0 Stars
Publicly accessible

Nationwide Heat Flow, Temperature Gradient, and Related Data SMU Node of the NGDS

This dataset compiles heat flow and temperature gradient data from over 44,000 wells across the United States, along with more than 6,000 related geothermal exploration resources. Originally assembled prior to 2014 for the now-retired National Geothermal Data System (NGDS), the co...

Richards, M. et al Southern Methodist University

Mar 01, 2014
4 Resources
0 Stars
Publicly accessible

Sedimentary Geothermal Feasibility Colorado Well Database

Well data were mined from Geothermal Prospector (GTP), Southern Methodist University (SMU), the Colorado Oil and Gas Conservation Commission (COGCC), and the Colorado Geological Survey (CGS). The well data gathered was then used to assess sedimentary geothermal feasibility in the ...

Taverna, N. National Renewable Energy Laboratory

Oct 31, 2019
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 78-32 Capacity Test

This dataset includes an Excel spreadsheet with Utah FORGE Phase 2c Well 78-32 capacity data. It also includes a readme file discussing the data which also includes the well coordinates.

Kirby, S. and Gall, R. Energy and Geoscience Institute at the University of Utah

Jun 20, 2019
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Simplified Discrete Fracture Network Data

The FORGE team is making these fracture models available to researchers wanting a set of natural fractures in the FORGE reservoir for use in their own modeling work. They have been used to predict stimulation distances during hydraulic stimulation at the open toe section of well 1...

Finnila, A. Golder Associates Inc.

Jun 01, 2021
3 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>