Search OEDI Data

Pressure Data from Cranfield CO2 Thermosiphon Test

Pressure data acquired in well F2 and F3 during the CO2 geothermal thermosiphoning test, Cranfield MS.

Freifeld, B. Lawrence Berkeley National Laboratory

Jan 21, 2015
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Fault Reactivation Through Fluid Injection Induced Seismicity Laboratory Experiments

Included are results from shear reactivation experiments on laboratory faults pre-loaded close to failure and reactivated by the injection of fluid into the fault. The sample comprises a single-inclined-fracture (SIF) transecting a cylindrical sample of Westerly granite. All expe...

Yu, J. et al Pennsylvania State University

Jul 01, 2023
27 Resources
0 Stars
Publicly accessible

Using Fully Coupled Hydro-Geomechanical Numerical Test Bed to Study Reservoir Stimulation with Low Hydraulic Pressure

This paper documents our effort to use a fully coupled hydro-geomechanical numerical test bed to study using low hydraulic pressure to stimulate geothermal reservoirs with existing fracture network. In this low pressure stimulation strategy, fluid pressure is lower than the minimu...

Fu, P. et al Lawrence Livermore National Laboratory

Jan 31, 2012
2 Resources
0 Stars
Publicly accessible

Distributed Acoustic Sensing (DAS) for Periodic Hydraulic Tests: Laboratory Data

These data were collected in the laboratory located at California State University Long Beach. They consist of DAS data collected from a fiber optic cable placed in a tank of water, subjected to oscillating head. These tests are described in the article linked below.

Coleman, T. California State University

Feb 27, 2015
5 Resources
0 Stars
Publicly accessible

Pressure-Temperature Simulation at Brady Hot Springs

These files contain the output of a model calculation to simulate the pressure and temperature of fluid at Brady Hot Springs, Nevada, USA. The calculation couples the hydrologic flow (Darcy's Law) with simple thermodynamics. The epoch of validity is 24 March 2015. Coordinates are ...

Feigl, K. Temple University

Jul 11, 2017
3 Resources
0 Stars
Publicly accessible

Fracture Sustainability Pressure, Temperature, Differential Pressure, and Aperture Closure Data

In these data sets, the experiment time, actual date and time, room temperature, sample temperature, upstream and downstream pressures (measured independently), corrected differential pressure (measured independently and corrected for offset and room temperature) indication of ape...

Kneafsey, T. Lawrence Berkeley National Laboratory

Sep 30, 2016
5 Resources
0 Stars
Publicly accessible

Experimental Images and Videos of Foam Stability (Half-life)

The experimental data obtained in this project is the thermal stability data of various foams measured using the setup established at Temple University during this study. The setup is installed with a portable digital camera which can take images and videos of foam evolution at a ...

Thakor, V. et al Temple University

Sep 15, 2021
10 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: Well 74-2TCH Temperature, Pressure, Well History, Well Bore Schematic

Temperature logs, pressure logs, directional survey, well history, well bore schematic, and other reports for well 74-2TCH at West Flank FORGE

Blankenship, D. Sandia National Laboratories

May 13, 2016
1 Resources
0 Stars
Publicly accessible

Pressure Sensor and Telemetry Methods for Measurement while Drilling in Geothermal Wells

Project status report as of end of 2011. Key milestones and accomplishments in the year 2011 include: Proof of feasibility of analog and digital components with their lifetime tested for more than 500 hours at 300 degrees C, Demonstration of ceramic-based packaging capable of su...

Vert, A. GE Global Research

Jan 01, 2012
1 Resources
0 Stars
Publicly accessible

M3 Wave DMP/APEX WEC 1:50 Small Scale Tank Testing Plan

Detailed laboratory test plan for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX." Includes test points, materials and methods, and sensors/telemetry to be used. Includes schematics of test apparatus and sensor type and locations.

Delos-Reyes, M. and Morrow, M. M3 Wave

Feb 17, 2017
1 Resources
0 Stars
Publicly accessible

Greenbuilt Construction Energy Efficiency Retrofit House Demonstration Sacramento

One of the homes that was part of Sacramento Municipal Utility District's (SMUD) Energy Efficiency Retrofit Demonstration (EERD) project was a 1980's era home in Fair Oaks, California, referred to as the Greenbuilt house, as Greenbuilt Construction completed the retrofit of the h...

Sparn, B. et al Mountain Energy Partnership

Aug 27, 2018
8 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Core-Flooding Experiment Results

This dataset contains core-flood experimental results from the Utah FORGE project, generated through laboratory tests at Lawrence Livermore National Laboratory. The experiments were conducted at temperatures of 100C and 200C using core samples from the 16A(78)-32 well. The primary...

Smith, M. et al Lawrence Livermore National Laboratory

Apr 04, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Pressure Temperature Logs from Blundell Well 71-10, Beaver County

This archive contains an Excel spreadsheet with pressure and temperature logs from PacifiCorp well 71-10. This well is in the Blundell Power Plant geothermal well field near Roosevelt Hot Springs, Beaver County, Utah. The spreadsheet also contains UTM coordinates for the location ...

Foster, K. Energy and Geoscience Institute at the University of Utah

Oct 08, 2018
1 Resources
0 Stars
Publicly accessible

Wind Turbine Sound Setbacks and Supply Curves: Ordinances and Extrapolated Trends, 110 Hub Height, 130 Rotor Diameter

This dataset provides a comprehensive set of wind turbine sound setbacks from every residential structure in the contiguous United States (CONUS). A sound setback is defined as the minimum required distance between a residential structure and a hypothetical turbine installation si...

Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)

Jan 01, 2025
18 Resources
0 Stars
Publicly accessible

Topographic and Air-Photo Lineaments in Various Locations Related to Geothermal Exploration in Colorado

These line shapefiles trace apparent topographic and air-photo lineaments in various counties in Colorado. It was made in order to identify possible fault and fracture systems that might be conduits for geothermal fluids, as part of a DOE reconnaissance geothermal exploration prog...

Zehner, R. Flint Geothermal, LLC

Feb 01, 2012
11 Resources
0 Stars
Publicly accessible

Laboratory Evaluation of EGS Shear Stimulation-Test 001

This is the results of an initial setup-shakedon test in order to develop the plumbing system for this test design. a cylinder of granite with offset holes was jacketed and subjected to confining pressure and low temperature (85C) and pore water pressure. Flow through the sample w...

Bauer, S. Sandia National Laboratories

Jul 29, 2014
1 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2615: Well 58-32 and 78-32 Poroelastic Properties

Lab data on permeability, grain bulk modulus, drained bulk modulus, Skempton's pore pressure coefficient, and Biot's effective stress coefficient for Utah Forge Well 58-32 and Well 78-32. Work done as part of project number 5-2615 by the University of Oklahoma.

Ghassemi, A. and Zhou, X. University of Oklahoma

Oct 31, 2022
2 Resources
0 Stars
Publicly accessible

M3 Wave DMP/APEX WEC 1:10 Scale Preliminary Tank Test Plan

This is a preliminary test plan for testing of the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX," at Hinsdale Wave Research Laboratory at Oregon State University. Additional logistical details and instrumentation specifics will be added as engi...

Delos-Reyes, M. and Morrow, M. M3 Wave

Feb 23, 2017
1 Resources
0 Stars
Publicly accessible

M3 Wave DMP/APEX WEC Device Configuration Drawings

Configurations as tested and modeled in final phase of project for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX."

Morrow, M. and Delos-Reyes, M. M3 Wave

Aug 08, 2017
1 Resources
0 Stars
Publicly accessible

One year occupant behavior/environment data for medium U.S. office

One year of longitudinal data (fifteen minute interval) on local thermal conditions, related behaviors, and comfort of twenty-four occupants of a medium-sized office building in Philadelphia, PA. Please cite: Langevin, J., Gurian, P.L., and Wen, J. (2015). Tracking the human...

Langevin, J. Lawrence Berkeley National Laboratory

Jul 20, 2015
2 Resources
1 Stars
In curation

M3 Wave DMP/APEX WEC Downselection Report

This downselect report follows the progression from initial concept pool to final concepts moving forward to tank testing for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX." Included is a brief discussion of anticipated impacts of the 3 final...

Morrow, M. and Delos-Reyes, M. M3 Wave

Aug 01, 2017
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Wells 16A(78)-32 and 16B(78)-32 Stimulation Pressure and Circulation Data April, 2024

This dataset consists of all of the pressure pumping data for Utah FORGE Well16A78-32 fracturing stages, Well 16B78-32 fracturing stages, and a 9-hour circulation test which took place after all of the frac plugs were drilled out. Fracturing in the wells took place in stages from ...

England, K. Energy and Geoscience Institute at the University of Utah

Jun 03, 2024
4 Resources
0 Stars
Publicly accessible

Energy Intensity Indicators in the U.S.: Residential Buildings Sector (1978 2004)

Energy intensity data and documentation published by the U.S. DOE's office of Energy Efficiency and Renewable Energy (EERE). Energy intensity is defined as: amount of energy used in producing a given level of output or activity; expressed as energy per unit of output. This is the ...

Hallett, K. and (EERE), O. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Utah FORGE: Hydrothermal Friction-Hydraulic Transmissivity Laboratory Experiments

Submission includes data from laboratory slide-hold-slide tests, combined with flow through tests, conducted on Westerly granite with 30 degree sawcut. Tests were conducted with a constant confining pressure of 30 MPa with an average pore pressure of 10 MPa at temperatures of 23 a...

Jeppson, T. and Lockner, D. United States Geological Survey

Feb 24, 2022
1 Resources
0 Stars
Publicly accessible

Data of High-Temperature Dynamic LCM Testing Setup

Data from high temperature dynamic sealing tests for various fracture widths, at various temperatures (degrees F), with 5 wt.% bentonite-based mud containing various material fiber contents, at 100 to 400 psi differential pressure. Data from pressure test and evaluation of the dy...

Magzoub, M. et al University of Oklahoma

May 31, 2021
11 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 7 8 9 Next >>