Search OEDI Data

Benchmark Model for Wastewater Treatment Using an Activated Sludge Process

This is benchmark model for wastewater treatment using an activated sludge process. The activated sludge process is a means of treating both municipal and industrial wastewater. The activated sludge process is a multi-chamber reactor unit that uses highly concentrated microorganis...

Byun, J. and Maravelias, C. Princeton University

Jan 21, 2022
2 Resources
0 Stars
Publicly accessible

Gearbox Reliability Collaborative Phase 3 Gearbox 3 Test

The GRC uses a combined gearbox testing, modeling, and analysis approach disseminating data and results to the industry and facilitating improvement of gearbox reliability. This test data describes the tests of GRC gearbox 3 in the National Wind Technology Center dynamometer and d...

Keller and WallenNational Renewable Energy Laboratory

Dec 21, 2016
18 Resources
0 Stars
Publicly accessible

Focusing Wave Energy for Wave Energy Converter Applications

Wave tank tests at Stevens Institute of Technology quantified the ability of near-surface platforms to concentrate wave energy over the platform. Due to the instantaneous change in water depth, mass, energy, and power are conserved in this process. The energy and power concentrat...

Raftery, M. Stevens Institute of Technology

Aug 10, 2010
7 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Circulation Testing

These data and test descriptions comprise a chilled circulation test conducted at the 164' fracture in the EGS Collab Experiment 1 testbed on the 4850 ft level of the Sanford Underground Research Facility. Descriptions of the meta data, design drawings for the flow testing system,...

Knox, H. et al Lawrence Berkeley National Laboratory

Apr 01, 2019
11 Resources
0 Stars
Publicly accessible

Penn State Lab Testing Fluid-Rock Interaction in Geothermal Reservoirs

This project focused on assessment and discovery of fluid-rock interaction in geothermal reservoirs. We accomplished work in four main areas: 1) fracture formation and the relationship between fluid flow and shear failure, 2) assessment of fracture geometry and fluid permeability ...

Madara, B. et al Pennsylvania State University

Jan 01, 2018
5 Resources
0 Stars
Publicly accessible

Development of a Downhole Tracer and pH Measurement Instrument for Application in Geothermal Wells

Due the high temperature and pressure conditions found in geothermal wells, tracer studies designed to elucidate properties of geothermal reservoirs are traditionally conducted by pulling liquid samples from the wellhead. These samples are then sent off for analysis in a fixed lab...

Hess, R. et al Sandia National Laboratories

Sep 11, 2013
1 Resources
0 Stars
Publicly accessible

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Geomechanical Packer Formation Model Iteraction

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This presentation outlines the work in rock modelling and interaction with the ...

Ghassemi, A. et al Welltec

Jun 20, 2023
2 Resources
0 Stars
Publicly accessible

Net Shape Fabricated Low Cost MHK Pass-Through the Hub Turbine Blades with Integrated Health Management Technology

The primary objective of this project is to develop a three-blade MHK rotor with low manufacturing and maintenance costs. The proposed program will design, fabricate and test a novel half-scale low cost, net shape fabricated single piece three-blade MHK rotor with integrated healt...

Wess, D. ARL Penn State

Feb 09, 2016
24 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Earth Model Datasets

The EGS Collab Project performed a series of tests to increase the understanding the response of crystalline rock mass to stimulations and fluid circulation to efficiently implement enhanced geothermal systems (EGS) technologies. The EGS Collab team created two underground testbed...

Neupane, G. et al Idaho National Laboratory

May 29, 2022
6 Resources
0 Stars
Publicly accessible

National Renewable Energy Laboratory/Habitat for Humanity Zero Energy Home: A Cold Climate Case Study for Affordable Zero Energy Homes

The design of this 1,280-square-foot, three-bedroom Habitat for Humanity of Metro Denver zero energy home carefully combines envelope efficiency, efficient equipment, appliances and lighting, and passive and active solar features to reach the zero energy goal. The home was designe...

Norton, P. et al National Renewable Energy Laboratory

Jul 21, 2016
4 Resources
0 Stars
Publicly accessible

Aquantis 2.5 MW Ocean Current Generation Device Tow Tank Dynamic Test Rig Drawings and Bill of Materials

Aquantis 2.5 MW Ocean Current Generation Device, Tow Tank Dynamic Test Rig Drawings and Bill of Materials. This submission contains information on the equipment for the scaled model tow tank testing. The information includes hardware, test protocols, and plans.

Swales, H. et al Dehlsen Associates, LLC

Jun 03, 2015
18 Resources
0 Stars
Publicly accessible

Gearbox Reliability Collaborative Phase 3 Gearbox 2 Test

The National Renewable Energy Laboratory (NREL) Gearbox Reliability Collaborative (GRC) was established by the U.S. Department of Energy in 2006; its key goal is to understand the root causes of premature gearbox failures and improve their reliability. The GRC uses a combined gear...

Keller and RobbNational Renewable Energy Laboratory

May 02, 2016
17 Resources
0 Stars
Publicly accessible

Metering Best Practices Applied in the National Renewable Energy Laboratory's Research Support Facility: A Primer to the 2011 Measured and Modeled Energy Consumption Datasets

Modern buildings are complex energy systems that must be controlled for energy efficiency. The Research Support Facility (RSF) at the National Renewable Energy Laboratory (NREL) has hundreds of controllers computers that communicate with the building's various control systems to...

Sheppy. . et al National Renewable Energy Laboratory

Mar 25, 2016
4 Resources
0 Stars
Publicly accessible

Aquantis 2.5 MW Ocean Current Generation Device Design Details

Items in this submission provide the detailed design of the Aquantis Ocean Current Turbine and accompanying analysis documents, including preliminary designs, verification of design reports, CAD drawings of the hydrostatic drivetrain, a test plan and an operating conditions simula...

Banko, R. et al Dehlsen Associates, LLC

Jun 03, 2015
22 Resources
0 Stars
Publicly accessible

Understanding the Evolution of Customer Motivations and Adoption Barriers in Residential Solar Markets: Survey Data

This research focused on accelerating solar photovoltaic (PV) diffusion by collecting new market data and developing predictive modeling frameworks to test and refine understandings of household level motivations for adopting solar. Three different household-level surveys were...

Sigrin. . et al National Renewable Energy Laboratory

May 22, 2017
13 Resources
0 Stars
Publicly accessible

GeoVision Barriers Taskforce

This submission includes papers, presentations, and data developed during the multi-year GeoVision Barriers Taskforce effort. Developers have identified many non-technical barriers to geothermal power development, including land access, permitting, and market barriers. Included i...

Young, K. and Levine, A. National Renewable Energy Laboratory

Sep 30, 2015
5 Resources
0 Stars
Publicly accessible

Self-Healing and Re-Adhering Polymer-Cements with Improved Toughness

Polymer-cement experiments were conducted in order to assess the chemical and thermal properties of various polymer-cement composites. This file set includes the following polymer-cement analyses: Polymer-Cement Composite Synthesis Polymer-Cement Interactions by Atomistic Simulat...

Fernandez, C. Pacific Northwest National Laboratory

Nov 11, 2015
10 Resources
0 Stars
Publicly accessible

ATP3 Unified Field Study Data

ATP3 Unified Field Study DataThe Algae Testbed Public-Private Partnership ATP3 was established with the goal of investigating open pond algae cultivation across different geographic climatic seasonal and operational conditions while setting the benchmark for quality data collectio...

Wolfrum. . et al National Renewable Energy Laboratory

Oct 19, 2017
17 Resources
0 Stars
Publicly accessible

Reservoir Stimulation Optimization with Operational Monitoring for Creation of EGS

EGS field projects have not sustained production at rates greater than half of what is needed for economic viability. The primary limitation that makes commercial EGS infeasible is our current inability to cost-effectively create high-permeability reservoirs from impermeable, igne...

A., C. Pacific Northwest National Laboratory

Sep 25, 2013
19 Resources
0 Stars
Publicly accessible

Aquantis 2.5 MW Ocean Current Generation Device Scaled Tank Test Design and Results

Aquantis 2.5 MW Ocean Current Generation Device, Tow Tank Dynamic Rig Structural Analysis Results. This is the detailed documentation for scaled device testing in a tow tank, including models, drawings, presentations, cost of energy analysis, and structural analysis. This datase...