Search OEDI Data
Showing results 1 - 25 of 769.
Show
results per page.
Order by:
Available Now:
Research Areas
Accessibility
Data Type
Organization
Source
Utah FORGE: Well 58-32 Stimulation Data
Pressure, temperature, and flow data from open-hole, upper perforation, and lower perforation well stimulations gathered from various tools collected at well 58-32 during phase 2C.
Best, S. Geothermal Resource Group
Apr 20, 2019
16 Resources
0 Stars
Publicly accessible
16 Resources
0 Stars
Publicly accessible
Analyzed Boise Data for Oscillatory Hydraulic Tomography
Data here has been "pre-processed" and "analyzed" from the raw data submitted to the GDR previously (raw data files found at http://gdr.openei.org/submissions/479. doi:10.15121/1176944 after 30 September 2017). First, we submit .mat files which are the "pre-processed" data (must h...
Lim, D. University of Wisconsin
Jul 01, 2015
8 Resources
0 Stars
Publicly accessible
8 Resources
0 Stars
Publicly accessible
Utah FORGE Well 16A(78)-32 Stimulation Data (April, 2022)
This is a set of data related to the stimulation program at Utah FORGE well 16A(78)-32 during April, 2022. This includes daily reports, 1 second Pason data, tracer data, and shear stimulation data and information including a report of an evolving prognosis for the stimulation oper...
McLennan, J. Energy and Geoscience Institute at the University of Utah
May 18, 2022
11 Resources
0 Stars
Publicly accessible
11 Resources
0 Stars
Publicly accessible
Brady Well Coordinates and Observation Sensor Depths
Contains metadata associated with the wells used in the 2016 Spring Campaign led partially by UW Madison, LBNL, and LLNL scientists. Included with the well coordinates are the depths to the pressure sensors used in observation and pumping wells. Read me files are included for each...
Lim, D. University of Wisconsin
Mar 13, 2016
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Material Properties for Brady Hot Springs Nevada USA from PoroTomo Project
The PoroTomo team has completed inverse modeling of the three data sets (seismology, geodesy, and hydrology) individually, as described previously. The estimated values of the material properties are registered on a three-dimensional grid with a spacing of 25 meters between nodes....
Feigl, K. and PoroTomo Team, . University of Wisconsin
Mar 06, 2019
10 Resources
0 Stars
Publicly accessible
10 Resources
0 Stars
Publicly accessible
Utah FORGE: Neubrex Well 16B(78)-32 Cementing and Circulation Fiber Optics Monitoring Reports July, 2023
Included here are two fiber optics monitoring reports on Utah FORGE well 16B(78)-32 from Neubrex Energy Services. These reports review the fiber optics monitoring during both the cementing and circulation test periods of the well. Cementing as well as post-cementing monitoring a...
Jurick, D. et al Neubrex Energy Services (US), LLC
Oct 21, 2023
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Raw Pressure Data from Boise Hydrogeophysical Research Site (BHRS)
Pressure data from a phreatic aquifer was collected in the summer of 2013 during Multi-frequency Oscillatory Hydraulic Tomography pumping tests. All tests were performed at the Boise Hydrogeophysical Research Site. The data will be inverted using a fast steady-periodic adjoint-bas...
Lim, D. University of Wisconsin
Jul 17, 2013
20 Resources
0 Stars
Publicly accessible
20 Resources
0 Stars
Publicly accessible
Utah FORGE: Stimulation Crosswell Strain Response Fiber Optic Monitoring Report April 2024
This report documents the use of fiber optic Rayleigh frequency shift (RFS) Distributed Strain Sensing (DSS), Distributed Temperature Sensing (DTS), and microseismic data recorded during the hydraulic fracture stimulation of well 16A(78)-32, as detected in the offset well 16B(78)-...
Jurick, D. et al Neubrex Energy Services (US), LLC
Apr 03, 2024
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Well 16B(78)-32 Post Hydraulic Fracturing 9 Hour Dual Well Circulation Test Fiber Optic Monitoring Report April 2024
This report examines the fiber optic measurements made on the Utah FORGE well 16B(78)-32 after it and well 16A(78)-32 were hydraulically stimulated and shortly thereafter a 9 hour cross well circulation test was run between them. The report reviews distributed fiber optic signal p...
Guzik, A. and Davidson, E. Neubrex Energy Services (US), LLC
Apr 27, 2024
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Distributed Acoustic Sensing (DAS) Data for Periodic Hydraulic Tests: Hydraulic Data
Hydraulic responses from periodic hydraulic tests conducted at the Mirror Lake Fractured Rock Research Site, during the summer of 2015. These hydraulic responses were measured also using distributed acoustic sensing (DAS) which is cataloged in a different submission under this gr...
Cole, M. California State University
Jul 31, 2015
6 Resources
0 Stars
Publicly accessible
6 Resources
0 Stars
Publicly accessible
WHOLESCALE: Seismic Survey Metadata from San Emidio Nevada 2021
This is a collection of metadata from the 2021 seismic survey at the San Emidio geothermal field in Nevada. In April and May 2021, 37 tri-axial short period seismographs were deployed in a 1.8km diameter cluster centered on 40.367278 deg N, 119.409019 deg W. The first data record...
Lord, N. et al Department of Geoscience University of Wisconsin-Madison
Apr 06, 2021
10 Resources
0 Stars
Publicly accessible
10 Resources
0 Stars
Publicly accessible
WHOLESCALE: Seismic Survey Data from San Emidio Nevada 2021
This dataset includes raw and processed seismic data from the 2021 seismic survey at the San Emidio geothermal field in Nevada. In April and May 2021, 37 tri-axial short period seismographs were deployed in a 1.8km diameter cluster centered on 40.367278 N, 119.409019 W. The first...
Lord, N. et al University of Wisconsin-Madison
Apr 06, 2021
6 Resources
0 Stars
Publicly accessible
6 Resources
0 Stars
Publicly accessible
Utah FORGE: Fluid Injection Induced Shearing Experiments on Fractured Granitoid at Elevated Temperatures
This repository contains experimental data from a series of fluid injection-induced shearing tests conducted on Utah FORGE granitoid. The experiments were performed using an aluminum triaxial pressure vessel (TEMCO) apparatus at Pennsylvania State University. The primary aim was t...
Elsworth, D. et al Pennsylvania State University
Aug 12, 2024
16 Resources
0 Stars
Publicly accessible
16 Resources
0 Stars
Publicly accessible
WHOLESCALE: Seismic Waveform Data from San Emidio, Nevada 2022
Included here is a link to seismic waveform data collected at San Emidio, Nevada in 2022. The seismic instruments used were provided by EarthScope Consortium through the EarthScope Primary Instrument Center at New Mexico Tech. Data collected are available here through EarthScope ...
Lord, N. et al University of Wisconsin Madison
Apr 05, 2022
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
EGS Collab: Hydraulic Fracturing Test Measurements on the 4100L of SURF
This package includes data from two days of testing at the Sanford Underground Research Facility (SURF) on the 4100 level. The tests were performed in borehole TV4100 in the battery charging alcove south of the Yates shaft. TV4100 is a vertical borehole ~50 meters deep. A series o...
Ingraham, M. et al Sandia National Laboratories
Aug 15, 2019
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
Pressure-Temperature Simulation at Brady Hot Springs
These files contain the output of a model calculation to simulate the pressure and temperature of fluid at Brady Hot Springs, Nevada, USA. The calculation couples the hydrologic flow (Darcy's Law) with simple thermodynamics. The epoch of validity is 24 March 2015. Coordinates are ...
Feigl, K. Temple University
Jul 11, 2017
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
Data of High-Temperature Dynamic LCM Testing Setup
Data from high temperature dynamic sealing tests for various fracture widths, at various temperatures (degrees F), with 5 wt.% bentonite-based mud containing various material fiber contents, at 100 to 400 psi differential pressure.
Data from pressure test and evaluation of the dy...
Magzoub, M. et al University of Oklahoma
May 31, 2021
11 Resources
0 Stars
Publicly accessible
11 Resources
0 Stars
Publicly accessible
Utah FORGE Well 16A(78)-32 Stage 1 Pressure Falloff Analysis
This is an analysis of the pressure falloff in stage 1 fracture stimulation of FORGE well 16A(78)-32. The objective of this research is to understand the information content of the well stimulation data of FORGE Well 16A(78)-32. The Stage 1 step-rate test, a variant of the classic...
Kazemi, H. et al Colorado School of Mines
Aug 04, 2022
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Pressure Sensor and Telemetry Methods for Measurement while Drilling in Geothermal Wells
Project status report as of end of 2011. Key milestones and accomplishments in the year 2011 include:
Proof of feasibility of analog and digital components with their lifetime tested for more than 500 hours at 300 degrees C,
Demonstration of ceramic-based packaging capable of su...
Vert, A. GE Global Research
Jan 01, 2012
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
M3 Wave DMP/APEX WEC 1:50 Small Scale Tank Testing Plan
Detailed laboratory test plan for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX." Includes test points, materials and methods, and sensors/telemetry to be used. Includes schematics of test apparatus and sensor type and locations.
Delos-Reyes, M. and Morrow, M. M3 Wave
Feb 17, 2017
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
M3 Wave DMP/APEX WEC 1:10 Scale Preliminary Tank Test Plan
This is a preliminary test plan for testing of the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX," at Hinsdale Wave Research Laboratory at Oregon State University. Additional logistical details and instrumentation specifics will be added as engi...
Delos-Reyes, M. and Morrow, M. M3 Wave
Feb 23, 2017
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
State Estimation for advanced control of wave energy converters
A report on state estimation for advanced control of wave energy converters (WECs), with supporting data models and slides from the overview presentation. The methods discussed are intended for use to enable real-time closed loop control of WECs.
Coe, R. and Bacelli, G. Sandia National Laboratories
Apr 25, 2017
6 Resources
0 Stars
Publicly accessible
6 Resources
0 Stars
Publicly accessible
M3 Wave DMP/APEX WEC Survival Test Report
This survival test report for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX," summarizes the key tank test data, numerical model results, input test conditions (both numerical and tank testing), and crosses these items with three designs of t...
Morrow, M. and Delos-Reyes, M. M3 Wave
Aug 31, 2017
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
M3 Wave DMP/APEX WEC Downselection Report
This downselect report follows the progression from initial concept pool to final concepts moving forward to tank testing for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX." Included is a brief discussion of anticipated impacts of the 3 final...
Morrow, M. and Delos-Reyes, M. M3 Wave
Aug 01, 2017
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
M3 Wave DMP/APEX WEC Next Generation Concept Drawings
This is the preliminary concepts that formed the basis of the first round of numerical modeling and technical discussions for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX." IGES wireframes will be uploaded also. Additional hybrid concepts ...
Morrow, M. M3 Wave
Sep 21, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible