Search OEDI Data

WaterTAP3 Model Results for NAWI's Baseline Analyses

This dataset contains the results for the WaterTAP3 model that was used for the eight NAWI (National Alliance for Water Innovation) baseline studies published in the Environmental Science and Technology special issue: Technology Baselines and Innovation Priorities for Water Treatm...

Miara, A. et al National Renewable Energy Laboratory

Feb 01, 2022
10 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 1a Tensor Strainmeter Data for the April, 2022 Stimulation of Well 16A(78)-32

Data from two Tensor Optical Fiber Strainmeters that were operational during Stages 1, 2, and 3 of the April, 2022 stimulation of well 16A(78)-32. Each csv file contains data from each stimulation stage (stage1, stage2, stage3) for both Phase 1a strainmeter installations (FS01, f...

DeWolf, S. and Murdoch, L. Clemson University

Sep 15, 2022
8 Resources
0 Stars
Publicly accessible

NREL GIS data: Bhutan Wind Power Density at 50m Above Ground Level

GIS data for Bhutan's Wind Power Density at 50m Above Ground Level. NREL developed estimates of Bhutans wind resources at a spatial resolution of 1 km^2 using NREL?s Wind Resource Assessment and Mapping System (WRAMS). Wind turbine output at a given site can be predicted using win...

Heimiller, D. et al National Renewable Energy Laboratory

Nov 25, 2014
3 Resources
0 Stars
Publicly accessible

The Convergence of Heat, Groundwater, & Fracture Permeability: Innovative Play Fairway Modeling Applied to the Tularosa Basin Project Report

This report details all of the work done in Phase 2 of a geothermal exploration project in Tularosa Basin, New Mexico. Data acquired as part of Phase 2 includes field geology (geological reconnaissance and mapping), gravity surveys, shallow temperature surveys, well water sampling...

Nash, G. et al Energy and Geoscience Institute at the University of Utah

May 31, 2017
1 Resources
0 Stars
Publicly accessible

Directional Cooling-Induced Fracturing Westerly Granite Test Results

Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on a short, cylindrical sample of Westerly granite (diameter = 4 inches, height ~ 2 inches). Liquid nitrogen was poured in a copper cup attached to the top of the sample, and the resulting acoustic emissions ...

Nakagawa, S. Lawrence Berkeley National Laboratory

Dec 18, 2020
5 Resources
0 Stars
Publicly accessible

2019 Geothermal Market Report Fact Sheet

The 2020 U.S. Geothermal Power Production and District Heating Market Report is being developed by the National Renewable Energy Laboratory and Geothermal Rising, previously Geothermal Resources Council (GRC), with support from the Geothermal Technologies Office of the U.S. Depart...

Robins, J. et al National Renewable Energy Laboratory

Oct 01, 2020
1 Resources
0 Stars
Publicly accessible

LCOE Baseline for RME Surge WEC Device

This submission includes all the data to support an LCOE baseline assessment for the Resolute Marine Energy (RME) Surge WEC device.

Previsic, M. et al Re Vision Consulting

Jul 19, 2017
4 Resources
0 Stars
Publicly accessible

TEAMER: Tidal Currents Turbine Parametric Study Flow, Power, Torque, and Energy Optimization

This is an exercise in optimizing the flow through a shrouded axial turbine to have the least resistance and to have optimal output and torque and energy. In this study, different variations of the original geometry of the current turbine designed by Hydrokinetic Energy Corp. (HEC...

Schurtenberger, W. and Ge, Z. Hydrokinetic Energy Corp.

Jul 30, 2021
3 Resources
0 Stars
Publicly accessible

TEAMER: Tidal Currents in San Juan Archipelago, Washington

Re-analyzed acoustic Doppler current profiler (ADCP) data originally collected by NOAA CO-OPS (Center for Operational Oceanographic Products and Services) and equivalent point data from Pacific Northwest National Laboratory's FVCOM (Finite Volume Community Ocean Model) model of th...

Polagye, B. et al University of Washington

Dec 15, 2022
3 Resources
0 Stars
Publicly accessible

EGS Collab: Modeling and Simulation Working Group Teleconference Series (129-130)

This submission contains the presentation slides and recordings from EGS Collab Modeling and Simulation Working Group (MSWG) teleconferences number 129 through 130. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field act...

White, M. et al Pacific Northwest National Laboratory

Jun 22, 2022
3 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2557: Trixial Shear and Wellbore Breakout Tests Report and Data

Included are a report and data from triaxial shear tests on simulated Sierra White fault gouge and a borehole stimulation experiment. This serves as a progress report for the Role of Fluid and Temperature in Fracture Mechanics and Coupled Thermo-Hydro-Mechanical-Chemical (THMC) P...

Choens, C. and Yoon, H. Sandia National Laboratories

Apr 19, 2023
2 Resources
0 Stars
Publicly accessible

TEAMER: Drifting Hydrophone System Block Diagram and Pre-Amplifier Calibrations

This data release is part of TEAMER RFTS 2, where the Cooperative Institute for Marine Resources Studies (CIMRS) at Oregon State University is performing hardware and software development and integration of four newly designed drifting hydrophone systems for underwater noise measu...

Turnbull, J. et al Pacific Marine Energy Center (PMEC) / PacWave Oregon State University

Feb 26, 2024
3 Resources
0 Stars
Publicly accessible

kISMET Core Photos and Descriptions

These core photos and descriptions were taken from the five boreholes that were drilled as part of the kISMET SubTER project conducted at the Sanford Underground Research Facility (SURF) in Lead, SD. The boreholes are subvertical in orientation, and were drilled on the 4850 level ...

Dobson, P. et al Lawrence Berkeley National Laboratory

Aug 02, 2016
15 Resources
0 Stars
Publicly accessible

Advanced Sorbent Structure Recovery of Rare Earths, Precious Metals and Other Critical Materials from Geothermal Waters and Its Associated Technoeconomics

The work evaluates, develops and demonstrates flexible, scalable mineral extraction technology for geothermal brines based upon solid phase sorbent materials with a specific focus upon rare earth elements (REEs). The selected organic and inorganic sorbent materials (silica and MOF...

Addleman, R. et al Pacific Northwest National Laboratory

Sep 21, 2016
1 Resources
0 Stars
Publicly accessible

RANS Simulation RRF of Single Full Scale DOE RM1 MHK Turbine

Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single full scale DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. In this case study taking advantage of the symmetry of the DOE RM1 geometry, only half of the geometry i...

Javaherchi, T. et al University of Washington

Apr 10, 2013
2 Resources
0 Stars
Publicly accessible

Wave Energy Prize Wave Calibration Data for the 1:20 Scale Testing at MASK

Time series data, sensor layout, and wave calibration summaries for the wave height measurements for the 10 calibration sea states for the 1:20 scale testing of the Wave Energy Prize (WEP) at the US Navy's Maneuvering and Seakeeping (MASK) Basin at the Naval Surface Warfare Center...

Driscoll, R. National Renewable Energy Laboratory

May 08, 2017
6 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Simplified Discrete Fracture Network Data

The FORGE team is making these fracture models available to researchers wanting a set of natural fractures in the FORGE reservoir for use in their own modeling work. They have been used to predict stimulation distances during hydraulic stimulation at the open toe section of well 1...

Finnila, A. Golder Associates Inc.

Jun 01, 2021
3 Resources
0 Stars
Publicly accessible

Centipod WEC, Advanced Controls, Baseline LCOE

Project baseline levelized cost of energy (LCOE) model for the Centipod WEC containing annual energy production (AEP) data, a cost breakdown structure (CBS), model documentation, and the LCOE content model. This baseline was built for comparison with the resultant LCOE model, buil...

McCall, A. Dehlsen Associates, LLC

Feb 15, 2016
7 Resources
0 Stars
Publicly accessible

Centipod WEC, Advanced Controls, Resultant LCOE

Project resultant levelized cost of energy (LCOE) model after implementation of model predictive control (MPC) controller. Contains annual energy production (AEP) data, cost breakdown structure (CBS), model documentation, and the LCOE content model. This is meant for comparison wi...

McCall, A. Dehlsen Associates, LLC

Feb 15, 2016
7 Resources
0 Stars
Publicly accessible

Utah FORGE Development of a Reservoir Seismic Velocity Model and Seismic Resolution Study

This is data from and a final report on the development of a 3D velocity model for the larger FORGE area and on the seismic resolution in the stimulated fracture volume at the bottom of well 16A-32. The velocity model was developed using RMS velocities of the seismic reflection su...

Vasco, D. and Chan, C. Array Information Technology

Apr 30, 2022
2 Resources
0 Stars
Publicly accessible

The Foundational Industry Energy Dataset: Unit-level Characterization and Derived Energy Estimates for Industrial Facilities in 2017

The Foundational Industry Energy Dataset (FIED) addresses several of the areas of growing disconnect between the demands of industrial energy analysis and the state of industrial energy data by providing unit-level characterization by facility. Each facility is identified by a uni...

McMillan, C. et al National Renewable Energy Laboratory (NREL)

Jul 01, 2024
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Well Data for Student Competition

Well 58-32 (previously labeled MU-ESW1) was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. Well Accord-1 was drilled decades ago for geothermal exploration purposes. While ...

Podgorney, R. et al Idaho National Laboratory

Dec 07, 2018
12 Resources
0 Stars
Publicly accessible

2016 Passive Seismic Imaging of the Dixie Valley Geothermal Well Field for EGS Favorability and Fault Mapping

This submission provides reports on the results of seismic data analyses, statistical data sets of rock properties under the DVGWF, GIS data for new maps of EGS favorability, and a link to raw seismogram data archived by the IRIS-DMS.

Louie, J. et al University of Nevada, Reno

Nov 01, 2015
7 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: 3D Seismic Velocity Model and Updated Microseismic Catalog Using Transfer-Learning Aided Double-Difference Tomography

This package contains a 3D Seismic velocity model and an updated microseismic catalog associated with a proceedings paper (Chai et al., 2020) published in the 45th Workshop on Geothermal Reservoir Engineering. The 3D_seismic_velocity_model text file contains x (m), y(m), z(m), P-w...

Chai, C. et al Oak Ridge National Laboratory

Apr 20, 2020
7 Resources
0 Stars
Publicly accessible

Admiralty Inlet Hub-Height Turbulence Measurements from June 2012

This data is from measurements at Admiralty Head, in Admiralty Inlet. The measurements were made using an IMU equipped ADV mounted on a mooring, the 'Tidal Turbulence Mooring' or 'TTM'. The inertial measurements from the IMU allows for removal of mooring motion in post processing....

Kilcher, L. National Renewable Energy Laboratory

Jun 18, 2012
7 Resources
0 Stars
Publicly accessible

<< Previous 19 20 21 22 23 24 25 26 27 28 Next >>