Search OEDI Data

RANS Simulation ADM of the NREL Phase VI wind turbine modeled as MHK Turbine

Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. In this case study the flow field around and in the wake of the NREL Phase VI wind turbine, modeled is MH...

Javaherchi, T. University of Washington

Jun 08, 2016
3 Resources
0 Stars
Publicly accessible

TEAMER: Water Tunnel Data from Testing the Pterofin Skimmer Concept

Pterofin's Skimmer concept relies on a flapping and pitching hydrofoil to extract hydrokinetic energy from water flows. The concept aims to utilize unsteady fluid dynamics phenomena (added mass, shed vorticity, and unsteady boundary layer development) to achieve higher lift coeffi...

Jaffa, N. et al Pennsylvania State University, Applied Research Laboratory

Jul 13, 2023
7 Resources
0 Stars
Publicly accessible

Applications of Fractured Continuum Model to Enhanced Geothermal System Heat Extraction Problems

This paper describes the applications of the fractured continuum model to the different enhanced geothermal systems reservoir conditions. The capability of the fractured continuum model to generate fracture characteristics expected in enhanced geothermal systems reservoir environm...

Kalinina, E. et al Sandia National Laboratories

May 06, 2014
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2439: Report on Minifrac Tests for Stress Characterization

This report describes minifrac tests conducted in the 16B(78)-32 well at the Utah FORGE site to characterize subsurface stresses, including the magnitude and orientation of the minimum and maximum horizontal stresses and the magnitude of the vertical stress. A minifrac test was co...

Kelley, M. et al Battelle Memorial Institute

Feb 22, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: LBNL Status Report on the VEMP Tool 2022

This report describes the current status of the Vertical Electromagnetic Profiling, or VEMP tool, that is on loan to Lawrence Berkeley National Lab (LBNL) from Geothermal Energy Research and Development Co., Ltd. (GERD), Japan. The report describes the initial inspection of the to...

Wilt, M. et al Lawrence Berkeley National Laboratory

Jun 24, 2022
1 Resources
0 Stars
Publicly accessible

Deep Direct-Use Feasibility Study Numerical Modeling and Uncertainty Analysis using iTOUGH2 for West Virginia University

To reduce the geothermal exploration risk, a feasibility study is performed for a deep direct-use system proposed at the West Virginia University (WVU) Morgantown campus. This study applies numerical simulations to investigate reservoir impedance and thermal production. Because of...

Garapati, N. et al West Virginia University

Dec 20, 2019
13 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Core Logs

Core logs and photos from the EGS Collab project Experiment 2 for the Top Vertical well (TV4100) and the Top Horizontal well (TV 4100) on the 4100 Level of SURF (the Sanford Underground Research Facility). The core logs are stored in a single PDF file with 5-ft run intervals. In t...

Dobson, P. et al Lawrence Berkeley National Laboratory

Jul 08, 2019
7 Resources
0 Stars
Publicly accessible

Observation-Based Resource Assessment of Gulf Stream MHK

Multi-year measurements of current velocity, salinity, and temperature from fixed and vessel-mounted sensors quantify Gulf Stream (GS) MHK resource variability and inform development off Cape Hatteras, NC. Vessel transects across the GS demonstrate a jet-like velocity structure wi...

Muglia, M. et al North Carolina State University

Jan 01, 2020
1 Resources
0 Stars
Publicly accessible

RANS Simulation VBM of Single Full Scale DOE RM1 MHK Turbine

Attached are the .cas and .dat files along with the required User Defined Functions (UDFs) and look-up table of lift and drag coefficients for Reynolds Averaged Navier-Stokes (RANS) simulation of a single full scale DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. In this...

Javaherchi, T. and Aliseda, A. University of Washington

Apr 10, 2013
8 Resources
0 Stars
Publicly accessible

Admiralty Inlet Hub-Height Turbulence Measurements from June 2012

This data is from measurements at Admiralty Head, in Admiralty Inlet. The measurements were made using an IMU equipped ADV mounted on a mooring, the 'Tidal Turbulence Mooring' or 'TTM'. The inertial measurements from the IMU allows for removal of mooring motion in post processing....

Kilcher, L. National Renewable Energy Laboratory

Jun 18, 2012
7 Resources
0 Stars
Publicly accessible

Utah FORGE 2439: Machine Learning for Well 16A(78)-32 Stress Predictions September 2023 Report

This task completion report documents the development and implementation of machine learning (ML) models for the prediction of in-situ vertical (Sv), minimum horizontal (SHmin) and maximum horizontal (SHmax) stresses in well 16A(78)-32. The detailed description of the experimental...

Mustafa, A. et al Battelle Memorial Institute

Sep 28, 2023
3 Resources
0 Stars
Publicly accessible

Brady's Geothermal Field March 2016 Vibroseis SEG-Y Files and UTM Locations

PoroTomo March 2016 Updated vibroseis source locations with UTM locations. Supersedes gdr.openei.org/submissions/824. Updated vibroseis source location data for Stages 1-4, PoroTomo March 2016. This revision includes source point locations in UTM format (meters) for all four Stage...

Feigl, K. University of Wisconsin

Mar 31, 2016
10 Resources
0 Stars
Publicly accessible

Utah FORGE: Sanvean Technologies Drilling Data from Well 16B(78)-32

Included here is Sanvean Technologies bit sensor data amalgamated with data from National Oilwell Varco's (NOV) BlackBox tool for Reed Hycalog bits used during drilling of Well 16B(78)-32. The dataset contains information collected at the bit while drilling including rate of penet...

Barker, C. Energy and Geoscience Institute at the University of Utah

Oct 26, 2023
5 Resources
0 Stars
Publicly accessible

RANS Simulation VBM of Array of Three Coaxial Lab Scaled DOE RM1 MHK Turbine with 5D Spacing

Attached are the .cas and .dat files along with the required User Defined Functions (UDFs) and look-up table of lift and drag coefficients for the Reynolds Averaged Navier-Stokes (RANS) simulation of three coaxially located lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CF...

Javaherchi, T. University of Washington

Jun 08, 2016
9 Resources
0 Stars
Publicly accessible

Seismic Survey 2016 Data at Crescent Valley, Nevada

In September 2016, 989 vertical-component seismic instruments were deployed for 75 hours at the Crescent Valley greenfield geothermal play area in Nevada. Data were recorded 12/9/16 12/15/16. Data are stored in individual files in one-minute increments in SEGD formats. See the met...

Lord, N. et al University of Wisconsin Madison

Dec 04, 2023
6 Resources
0 Stars
Publicly accessible

Utah FORGE 2439: Well 16B(78)-32 Field-Test Data from Mini-Frac Tests

This submittal includes the field-test data collected during stress tests conducted in the Utah FORGE 16B(78)-32 wellbore to measure/characterize the stresses in the geothermal reservoir. The type of stress test performed is referred to as a mini-frac test or a micro-frac test. Th...

Kelley, M. et al Battelle Memorial Institute

Jul 02, 2023
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32: Summary of Drilling Activities

This is a 74 page detailed summary of the drilling activities of Utah FORGE 16A(78)-32, a highly deviated well completed on February 2nd, 2021, as part of the Utah FORGE project. This well was deviated at 65 degrees from vertical after reaching 6000 feet in depth had a total measu...

Winkler, D. et al Energy and Geoscience Institute at the University of Utah

Mar 20, 2021
1 Resources
0 Stars
Publicly accessible

Snake River Plain FORGE: Well Data for WO-2

Well data for the WO-2 well located in eastern Snake River Plain, Idaho. This data collection includes lithology reports, borehole logs, temperature at depth data, neutron density and gamma data, and rock strength parameters for the WO-2 well. This collection of data has been ass...

Podgorney, R. Idaho National Laboratory

Jul 29, 1991
9 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439v2: Report on Predicting Far-Field Stresses Using Finite Element Modeling and Near-Wellbore Machine Learning for Well 16A(78)-32

This report presents the far-field stress predictions at two locations along the vertical section of Utah FORGE Well 16A (78)-32 using a physics-based thermo-poro-mechanical model. Three principal stresses in far-field were obtained by solving an inverse problem based on the near-...

Lu, G. et al University of Pittsburgh

Aug 30, 2024
2 Resources
0 Stars
Publicly accessible

Field Testing of Compartmentalization Methods for Multifamily Construction Washington DC

BSC TO5 Task 2.1 Field Testing of Compartmentalization Methods for Multifamily Construction Capitol Heights, MD 20743 A building comprising five vertical townhome units was built in the Washington, D.C., area; the townhomes were three-story slab-on-grade units (1700-2000 ft2) wit...

Ueno, K. and Lstiburek, J. Building Science Corporation

Apr 27, 2016
22 Resources
0 Stars
Publicly accessible

Aquantis 2.5 MW Ocean Current Generation Device Tow Tank Dynamic Test Rig Drawings and Bill of Materials

Aquantis 2.5 MW Ocean Current Generation Device, Tow Tank Dynamic Test Rig Drawings and Bill of Materials. This submission contains information on the equipment for the scaled model tow tank testing. The information includes hardware, test protocols, and plans.

Swales, H. et al Dehlsen Associates, LLC

Jun 03, 2015
18 Resources
0 Stars
Publicly accessible

Walker Ranch 3D Seismic Images

Amplitude images (both vertical and depth slices) extracted from 3D seismic reflection survey over area of Walker Ranch area (adjacent to Raft River). Crossline spacing of 660 feet and inline of 165 feet using a Vibroseis source. Processing included depth migration. Micro-earthqua...

J., R. Lawrence Livermore National Laboratory

Mar 01, 2016
2 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Report on Borehole EM Data Collection and Imaging with the VEMP Field System

This report outlines electromagnetic field measurements that were made after stimulation at Utah FORGE in May of 2024. The measurements involved lowering an electrode to ~3500' in well 16A to energize the steel casing as part of the electric source, with the return electrode locat...

Alumbaugh, D. et al Lawrence Berkeley National Laboratory

Sep 05, 2024
1 Resources
0 Stars
Publicly accessible

Snake River Plain Play Fairway Analysis: Mountain Home Geothermal Area Natural State Model

The Mountain Home area is characterized by high heat flow and temperature gradient. Temperature data are available from 18 boreholes with depths equal to or greater than 200 m, 5 of which have depths ranging from ~1340 m to ~3390 m (MH-1, MH-2, Bostic1, Lawrence D No.1, and Anschu...

Garg, S. et al Utah State University

Jul 28, 2015
4 Resources
0 Stars
Publicly accessible

Community Resilience through Low-Temperature Geothermal Reservoir Thermal Energy Storage

Submitted data include simulations related to underground thermal battery (UTB) simulations described in Modeling and efficiency study of large scale underground thermal battery deployment, presented at GRC, October 2021. The UTB is comprised of a tank of water, a helical heat ex...

Nico, P. et al Lawrence Berkeley National Laboratory

Jan 29, 2022
4 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 Next >>