Search OEDI Data
Showing results 1 - 25 of 113.
Show
results per page.
Order by:
Available Now:
Research Areas
Accessibility
Data Type
Organization
Source
Utah FORGE Raw Microgravity Composite Data: Updated 10/2021.
This is a microgravity dataset from the Utah FORGE site near Milford, Utah. This composite dataset was updated in October, 2021 and contains data from December 17th, 2018 through September 24th, 2021. The data includes the GPS location of the measurement, date of the measurement, ...
Hardwick, C. Utah Geological Survey
Oct 01, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Phase 3 Microgravity Data
A 4D microgravity survey began in early 2019 in order to benchmark surface and subsurface elevations prior to Phase 3 drilling and stimulation campaigns. Microgravity stations are collocated with GPS deformation benchmarks and use the same location survey data. Surveys are underta...
Hardwick, C. Utah Geological Survey
Oct 07, 2020
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE Composite Raw Gravity Data 2021
This is a composite raw gravity dataset of the Utah FORGE area taken over time from December 2018 to to June 2021. The data shows differences in local gravity at different location across Utah FORGE. Included with the gravity data is the NAD83 UTM coordinates of each station in me...
Hardwick, C. Utah Geological Survey
Jun 04, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE Groundwater Levels: Updated 2021
Contains Utah FORGE ground water data for wells WOW2 and WOW3. The data was updated on October 5th, 2021 and contains legacy data. Groundwater data includes the level, offset, date, and time for each measurement. Temperature, drift, water elevation and other parameters are recorde...
Kirby, S. Energy and Geoscience Institute at the University of Utah
Oct 05, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Fallon FORGE: ArcGIS Site Location and Geologic Model Range Polygons
A zip file containing two ArcGIS polygons of the FORGE site located in Fallon, Nevada. FallonFORGE3DGeologicModelRange is the 3D geologic model range and FallonFORGESite is the FORGE site location.
Blankenship, D. Sandia National Laboratories
Mar 01, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE Telluric Monitoring Experiment Transfer Functions
The Utah Frontier Observatory for Research in Geothermal Energy (FORGE) attempted a stimulation at well 16A(78)-32 during April and May 2022. We recorded telluric and magnetotelluric (MT) data before, during, and after the well stimulation experiment using the FORGE Telluric Monit...
Mendoza, K. and Wannamaker, P. Energy and Geoscience Institute at the University of Utah
May 27, 2022
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Regional Well Locations
This archive contains a GIS point feature shapefile that shows the locations of wells in the general region of the Utah FORGE project, near Roosevelt Hot Springs. This includes Utah FORGE deep well 58-32 and wells for which data has been uploaded to the Geothermal Data Repository....
Nash, G. Energy and Geoscience Institute at the University of Utah
Feb 22, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Phase 3 Magnetotelluric (MT) Data
New high-quality tensor MT data at 122 sites, including the vertical magnetic field and utilizing ultra-remote referencing, have been acquired over the Utah FORGE project area. The results will be used to delineate the densities of faults and fractures in crystalline basement rock...
Wannamaker, P. and Maris, V. Energy and Geoscience Institute at the University of Utah
Oct 01, 2020
5 Resources
0 Stars
Publicly accessible
5 Resources
0 Stars
Publicly accessible
Utah FORGE: Geologic, Topographic, and Other Related Maps and GIS Data from the Earth Model
This submission contains a number of maps and shapefiles related to the Utah FORGE site. Examples include geologic maps (several variations) and GIS data for the Utah FORGE site outline.
All data are georeferenced to UTM, zone 12N, NAD 83, NAVD 88.
Podgorney, R. et al Idaho National Laboratory
Dec 07, 2018
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Utah FORGE: Milford Site Location, Seismometer Locations, Basin Depth Models, and Potentiometric Contours
This submission includes the geographic extent shapefile of the Milford FORGE site located in Utah, along with a shapefile of seismometer positions throughout the area, and models of basin depth and potentiometric contours.
Moore, J. Energy and Geoscience Institute at the University of Utah
Mar 09, 2016
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Utah FORGE: Area Terrain Slope Data
This archive contains a terrain slope image, in units of degrees, of the Utah FORGE area near Roosevelt Hot springs. The data was derived from 0.5 m resolution LiDAR DEM data and is in a GeoTiff format. It was processed using ArcGIS.
Nash, G. Energy and Geoscience Institute at the University of Utah
Dec 10, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE Phase Native State FALCON Model Files
The submission includes FALCON input file and mesh for the an initial pressure-temperature simulation, and a second set for pressure-temperature-displacement simulation. All simulations are steady state. Data and input for the FORGE Phase 2 native state model were compiled from hi...
Podgorney, R. Idaho National Laboratory
Jun 06, 2019
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE Well 78B-32 Daily Drilling Reports and Logs
This data set includes the daily drilling reports and Pason data for well 78B-32 and Schlumberger logs acquired after drilling completion. This well was drilled between June 27th and July 31st of 2021. Also included is raw and processed data for a variety of well data metrics incl...
McLennan, J. Energy and Geoscience Institute at the University of Utah
Aug 09, 2021
22 Resources
0 Stars
Publicly accessible
22 Resources
0 Stars
Publicly accessible
Utah FORGE: Discrete Fracture Network and Fracture Propagation Modelling
Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery Efficiency at the Utah Forge Site
Sharma, M. and Cao, M. University of Texas
Feb 07, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Soil Carbon Dioxide Data
These are data from soil CO2 flux surveys done in the Utah FORGE study area near Roosevelt Hot Springs. Concentration is in units of ppm and is the final concentration of CO2 in the chamber after the up-to-2-minute flux measurement. Flux is in units of grams of CO2 per m^2.
Rahilly, K. Energy and Geoscience Institute at the University of Utah
Mar 12, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE Downhole Geophone Seismic Data (August 2022)
This is a link to downhole geophone data collected by Schlumberger. These data were collected in the Utah FORGE deep seismic monitoring wells 58-32 and 56-32. The format is a standard SEGY and the units are bits. To convert to acceleration (m/s2) multiply by 2.333 x 10-7. Use one ...
Pankow, K. and Schlumberger, S. University of Utah Seismograph Stations
Aug 25, 2022
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
Utah FORGE: Microseismic Events
This archive contains Excel spreadsheets containing microseismic events detected in the study area during Utah FORGE Phase 2C. The Readme file included that describes the meaning of the abbreviations used as field headers in the spreadsheets. Additionally, there is a .dat (text) f...
Rutledge, J. Energy and Geoscience Institute at the University of Utah
Jul 08, 2019
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: InSAR Data
This is the InSAR dataset used in Utah FORGE Phase 2C to augment ground deformation monitoring. It is accompanied by a README.txt file which contains an explanation of the data in the .zip archive.
Feigl, K. et al Energy and Geoscience Institute at the University of Utah
Jul 01, 2019
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: Updated Phase 2C Well Location Coordinates
Utah FORGE has been established to develop, test, and improve the technologies and techniques required to develop EGS-type geothermal resources. Drilling of the first of two deep deviated wells, 16A(78)-32, will begin in the second half of 2020. This well will serve as the injecti...
Hardwick, C. Utah Geological Survey
Dec 07, 2020
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE Well 78B-32 Core Photos: Wet and Dry in Boxes
This is a set of 42 core photos, in boxes, from Utah FORGE well 78B-32. The photos show the core both wet and dry from depths of 6700 6737 feet and 8502 8538 feet.
Jones, C. Energy and Geoscience Institute at the University of Utah
Oct 21, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Area LiDAR Bare Earth DEM Mosaic
This is a mosaic of 154 bare earth DEM panels (0.5 m resolution) acquired during Phase II of the Utah FORGE project. The DEM covers the western Mineral Mountains and adjoining basin including the Roosevelt Hot Springs area. The coordinates are in UTM Zone 12, NAD 83 and elevation ...
Nash, G. Energy and Geoscience Institute at the University of Utah
Aug 07, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Well 16A(78)-32 Stimulation Tracer Test Results
This archive contains data from the tracer test performed during the Utah FORGE well 16A(78)-32 stimulation. This includes:
1. the raw data file from Pason in the csv format;
2. a one-page Word document from Pason that explains the headers and units used in their data file;
3. an...
Rose, P. and Barker, B. Energy and Geoscience Institute at the University of Utah
Sep 16, 2022
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE Deep Wells Water and Gas Sampling with Analyses by ThermoChem (October, 2022)
This data includes a document that describes the effort to collect and analyze water and gas samples from deep Utah FORGE wells 16A(78)-32, 58-32, 56-32 and 78B-32 along with additional pdf files showing ThermoChem's analyses attached as an appendix.
Joness, C. Energy and Geoscience Institute at the University of Utah
Oct 26, 2022
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: Seismic Reflection Data
This is 2D and 3D seismic reflection data from Utah FORGE reprocessed during Phase 2c. The readme file containing an explanation of the data including data formats, software that can be used, processing, and projection and datum used. The Reprocessing document gives the rationale ...
Miller, J. Energy and Geoscience Institute at the University of Utah
Jun 19, 2019
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Utah FORGE: Logs and Data from Deep Well 58-32 (MU-ESW1)
Data, logs, and graphics associated with the drilling and testing of Utah FORGE deep test well 58-32 (MU-ESW1) near Roosevelt Hot Springs.
Nash, G. and Moore, J. Energy and Geoscience Institute at the University of Utah
Apr 11, 2018
11 Resources
0 Stars
Publicly accessible
11 Resources
0 Stars
Publicly accessible