Search OEDI Data

Utah FORGE 2439: Report on Minifrac Tests for Stress Characterization

This report describes minifrac tests conducted in the 16B(78)-32 well at the Utah FORGE site to characterize subsurface stresses, including the magnitude and orientation of the minimum and maximum horizontal stresses and the magnitude of the vertical stress. A minifrac test was co...

Kelley, M. et al Battelle Memorial Institute

Feb 22, 2024
1 Resources
0 Stars
Publicly accessible

CalWave Device Behavior in Different Sea States from Scaled Tank Testing

This submission contains a summary of tank test derived WEC device behavior in different irregular sea states. CalWave sought to conduct experimental tank testing of scaled prototype units early on in the design process to obtain a first estimation of device performance for sea ...

Boerner, T. and Murray, B. CalWave Power Technologies Inc.

Mar 30, 2018
1 Resources
0 Stars
Publicly accessible

StingRAY Failure Mode, Effects and Criticality Analysis: WEC Risk Registers

Analysis method to systematically identify all potential failure modes and their effects on the Stingray WEC system. This analysis is incorporated early in the development cycle such that the mitigation of the identified failure modes can be achieved cost effectively and efficient...

Rhinefrank, K. Columbia Power Technologies, Inc.

Jul 25, 2016
18 Resources
0 Stars
Publicly accessible

Geothermal Thermoelectric Generation (G-TEG) with Integrated Temperature Driven Membrane Distillation and Novel Manganese Oxide for Lithium Extraction Final Report

This project aims to develop an innovative Geothermal ThermoElectric Generation (G-TEG) system specially designed to both generate electricity and extract high-value lithium (Li) from low-temperature geothermal brines. The process combined five modular technologies including silic...

Renew, J. et al Southern Research Institute

Mar 01, 2018
1 Resources
0 Stars
Publicly accessible

Aquantis 2.5 MW Ocean Current Generation Device MHK Hydrofoils Design, Wind Tunnel Optimization and CFD Analysis Report

Dataset contains MHK Hydrofoils Design and Optimization and CFD Analysis Report for the Aquantis 2.5 MW Ocean Current Generation Device, as well as MHK Hydrofoils Wind Tunnel Test Plan and Checkout Test Report.

Shiu, H. et al Dehlsen Associates, LLC

Jun 03, 2015
16 Resources
0 Stars
Publicly accessible

Community Geothermal: Thermal Conductivity Test and Data Analysis Report Wallingford, CT

Report on a formation thermal conductivity test that was performed on the geothermal test bore at Ulbrich Heights at 38 Louis Circle Lane in Wallingford, Connecticut. Data are applicable only within the Wallingford region and should not be extrapolated for other climatic and geogr...

Martin, C. Connecticut Department of Energy and Environmental Protection (CT DEEP)

Feb 20, 2024
1 Resources
0 Stars
Publicly accessible

Compatibility Study of Nanofiltration and Reverse Osmosis Membranes with 1 Cyclohexylpiperidenium Bicarbonate Solutions

The switchable polarity solvent forward osmosis (SPS FO) desalination process requires use of a polishing filtration step to remove trace quantities of draw solution from the product water stream. Selected nanofiltration (NF) and reverse osmosis (RO) membranes were tested for thei...

Adhikari, B. et al Idaho National Laboratory

Oct 01, 2015
2 Resources
0 Stars
Publicly accessible

Comparative Analysis of Alternative Means for Removing Noncondensable Gases from Flashed-Steam Geothermal Power Plants:April 1999 March 2000

This dataset corresponds to the final report on a screening study to compare six methods of removing noncondensable gases from direct-use geo-thermal steam power plants. This report defines the study methodologies and compares the performance and economics of selected gas-removal ...

Hallett, K. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
3 Resources
0 Stars
In curation

HERO WEC 2024 Electrical Configuration Deployment Data

The following submission includes raw and processed electrical configuration deployment data from the in water deployment of NREL's Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC), in the form of parquet files, TDMS files, CSV files, bag files, and MATLAB w...

Jenne, S. et al National Renewable Energy Laboratory

Apr 18, 2024
16 Resources
0 Stars
Publicly accessible

Microbial Taxa Distribution Data From 16S rRNA Analysis Of Desalination Operations At Carlsbad, CA And Tampa Bay, FL

This data set list the distribution of microbial taxa from three sets of sampling campaigns from unit operations in two large desalination facilities in the US conducted between March and May 2021. The desalination plants include the Claude "Bud" Lewis Carlsbad Desalination Plant ...

Kumar, M. et al University of Texas

Sep 24, 2021
3 Resources
0 Stars
Publicly accessible

The Foundational Industry Energy Dataset: Unit-level Characterization and Derived Energy Estimates for Industrial Facilities in 2017

The Foundational Industry Energy Dataset (FIED) addresses several of the areas of growing disconnect between the demands of industrial energy analysis and the state of industrial energy data by providing unit-level characterization by facility. Each facility is identified by a uni...

McMillan, C. et al National Renewable Energy Laboratory (NREL)

Jul 01, 2024
4 Resources
0 Stars
Publicly accessible

WaterTAP-REFLO models of Solar Still, Solar Still ZLD, Enhanced Evaporation pond results for baseline analysis

This folder contains results from models that were adapted into WaterTAP-REFLO. The files contain inputs and outputs for solar still, solar still ZLD, and enhanced evaporation pond unit process models for 4 different locations in the USA: Phoenix, Miami, Houston, and Baltimore. ...

Dani, N. et al New Mexico State University

Dec 19, 2024
5 Resources
0 Stars
Publicly accessible

Utah FORGE: GES Well 16A(78)-32 and Well 16B(78)-32 Stimulation Seismic Event Catalogs

This dataset contains seismic event catalogs from the hydraulic stimulation of wells 16A(78)-32 and 16B(78)-32 at the Utah FORGE site in April 2024. The data was collected by Geo Energy Suisse (GES) using a variety of seismic monitoring technologies, including 3-component (3C) geo...

Dyer, B. et al University of Utah Seismograph Stations

Apr 30, 2024
2 Resources
0 Stars
Publicly accessible

Remotely Sensed Thermal Anomalies in Western Colorado

This layer contains the areas identified as areas of anomalous surface temperature from Landsat satellite imagery in Western Colorado. Data was obtained for two different dates. The digital numbers of each Landsat scene were converted to radiance and the temperature was calculated...

Hussein, K. Flint Geothermal, LLC

Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

GeoThermalCloud framework for fusion of big data and multi-physics models in Nevada and Southwest New Mexico

Our GeoThermalCloud framework is designed to process geothermal datasets using a novel toolbox for unsupervised and physics-informed machine learning called SmartTensors. More information about GeoThermalCloud can be found at the GeoThermalCloud GitHub Repository. More information...

Vesselinov, V. Los Alamos National Laboratory

Mar 29, 2021
4 Resources
0 Stars
Publicly accessible

Penn State Lab Testing Fluid-Rock Interaction in Geothermal Reservoirs

This project focused on assessment and discovery of fluid-rock interaction in geothermal reservoirs. We accomplished work in four main areas: 1) fracture formation and the relationship between fluid flow and shear failure, 2) assessment of fracture geometry and fluid permeability ...

Madara, B. et al Pennsylvania State University

Jan 01, 2018
5 Resources
0 Stars
Publicly accessible

Alternative CAES Technology Using Depleted Unconventional Gas Wells and Subsurface Thermal Energy Storage (GeoCAES)

This project assessed the technical viability of a process called GeoCAES. The process stores electrical energy by injecting natural gas into shale gas formations using a compressor, storing it, and producing it through an expander to generate electricity. This data submission inc...

Johnston, H. and Young, D. National Renewable Energy Laboratory

May 23, 2019
8 Resources
0 Stars
Publicly accessible

US Municipal Desalination Plants

This submission presents results and observations from a series of surveys of US municipal desalination plants conducted during the last 20 years. The surveys were conducted to determine the number, characteristics, and concentrate disposal practices of US desalination plants. Eac...

Mickley, M. Mickley and Associates LLC

Aug 31, 2018
3 Resources
0 Stars
Publicly accessible

TEAMER: Numerical Modeling and Optimization of the iProTech Pitching Inertial Pump (PIP) Wave Energy Converter (WEC)

This project focused on developing an automated workflow to evaluate and optimize the iProTech Pitching Inertial Pump (PIP) wave energy converter (WEC) using open-source Python packages and the MATLAB/Simulink tool, WEC-Sim. The process involved parameterizing key design variables...

Wynn, N. et al National Renewable Energy Laboratory

Apr 11, 2024
1 Resources
0 Stars
Publicly accessible

Pilgrim Hot Springs Building Dimensions and Energy Modeling

This dataset was created to model the anticipated heating load of a geothermal project in development for the historical site of Pilgrim Hot Springs, and adds to the history of geothermal studies at the site. Models include an historical building (Nun's Quarters), existing modern ...

Garber-Slaght, R. and Coakley, M. National Renewable Energy Laboratory (NREL)

Feb 28, 2024
2 Resources
0 Stars
Publicly accessible

DEEPEN 3D PFA Weights for Exploration Datasets in Magmatic Environments

DEEPEN stands for DE-risking Exploration of geothermal Plays in magmatic ENvironments. As part of the development of the DEEPEN 3D play fairway analysis (PFA) methodology for magmatic plays (conventional hydrothermal, superhot EGS, and supercritical), weights needed to be develop...

Taverna, N. et al National Renewable Energy Laboratory

Jun 30, 2023
3 Resources
0 Stars
Publicly accessible

MASK3 for Advanced WEC Dynamics and Controls

This report outlines the "MASK3" wave tank test within the Advanced WEC Dynamics and Controls (AWDC) project. This test represents the final test in the AWDC project. The focus of the MASK3 test was to consider coordinated 3-degree-of-freedom (3DOF) control of a WEC in a realistic...

Coe, R. et al Sandia National Laboratories

May 01, 2019
4 Resources
0 Stars
Publicly accessible

Industrial Facility Combustion Energy Use

Facility-level industrial combustion energy use is calculated from greenhouse gas emissions data reported by large emitters (>25,000 metric tons CO2e per year) under the U.S. EPA's Greenhouse Gas Reporting Program (GHGRP, https://www.epa.gov/ghgreporting). The calculation applies ...

McMillanNational Renewable Energy Laboratory

Jul 19, 2016
2 Resources
0 Stars
Publicly accessible

U.S. Heat Demand by Sector for Potential Application of Direct Use Geothermal

This dataset includes heat demand for potential application of direct use geothermal broken down into 4 sectors: agricultural, commercial, manufacturing and residential. The data for each sector are organized by county, were disaggregated specifically to assess the market demand ...

McCabe, K. et al National Renewable Energy Laboratory

Jun 23, 2016
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Neubrex Well 16B(78)-32 Cementing and Circulation Fiber Optics Monitoring Reports July, 2023

Included here are two fiber optics monitoring reports on Utah FORGE well 16B(78)-32 from Neubrex Energy Services. These reports review the fiber optics monitoring during both the cementing and circulation test periods of the well. Cementing as well as post-cementing monitoring a...

Jurick, D. et al Neubrex Energy Services (US), LLC

Oct 21, 2023
2 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 7 Next >>