Search OEDI Data

Utah FORGE: Composite Raw Gravity Data 2021

This is a composite raw gravity dataset of the Utah FORGE area taken over time from December 2018 to to June 2021. The data shows differences in local gravity at different location across Utah FORGE. Included with the gravity data is the NAD83 UTM coordinates of each station in me...

Hardwick, C. Utah Geological Survey

Jun 04, 2021
1 Resources
0 Stars
Publicly accessible

ALFA Biological Monitoring Density Values South Energy Test Site, Newport, Oregon

Density values from active acoustic measurements at South Energy Test Site. This data correspond to a bottom mounted upward-looking WBAT, deployed from April 19th to September 30th. Samples (175 pings) were collected hourly at 1Hz.

Horne, J. Northwest National Marine Renewable Energy Center

Apr 11, 2017
2 Resources
0 Stars
Publicly accessible

Wind Turbine Road Setbacks: Ordinances (2022) and Extrapolated Trends, 115 Hub Height 170 Rotor Diameter

This dataset represents wind energy setback requirements from roads based on existing county ordinances as of April 2022. A setback requirement is a minimum distance from a road that an energy project may be developed, and these varied widely across the counties in which they exis...

Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)

Jan 01, 2024
5 Resources
0 Stars
Publicly accessible

Wind Turbine Railroad Setbacks: Ordinances (2022) and Extrapolated Trends, 115 Hub Height 170 Rotor Diameter

This dataset represents wind energy setback requirements from railroad based on existing county ordinances as of April 2022. A setback requirement is a minimum distance from a railroad that an energy project may be developed, and these varied widely across the counties in which th...

Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)

Jan 01, 2024
5 Resources
0 Stars
Publicly accessible

Solar PV Structure Setbacks: Ordinances (2022) and Extrapolated Trends

This dataset represents solar energy setback requirements from structures based on county ordinances as of April 2022. A setback requirement is a minimum distance from a structure that an energy project may be developed, and these varied widely across the counties in which they ex...

Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)

Jan 01, 2024
5 Resources
0 Stars
Publicly accessible

Solar PV Water Setbacks: Ordinances (2022) and Extrapolated Trends

This dataset represents solar energy setback requirements from bodies of water based on county ordinances as of April 2022. A setback requirement is a minimum distance from water that an energy project may be developed, and these varied widely across the counties in which they exi...

Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)

Jan 01, 2024
5 Resources
0 Stars
Publicly accessible

Wind Turbine Transmission Setbacks: Ordinances (2022) and Extrapolated Trends, 115 Hub Height 170 Rotor Diameter

This dataset represents wind energy setback requirements from transmission based on existing county ordinances as of April 2022. A setback requirement is a minimum distance from transmission infrastructure that an energy project may be developed, and these varied widely across the...

Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)

Jan 01, 2024
5 Resources
0 Stars
Publicly accessible

Wind Turbine Structure Setbacks: Ordinances (2022) and Extrapolated Trends, 115 Hub Height 170 Rotor Diameter

This dataset represents wind energy setback requirements from structures based on existing county ordinances as of April 2022. A setback requirement is a minimum distance from a structure that an energy project may be developed, and these varied widely across the counties in which...

Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)

Jan 01, 2024
5 Resources
0 Stars
Publicly accessible

Solar PV Road Setbacks: Ordinances (2022) and Extrapolated Trends

This dataset represents solar energy setback requirements from roads based on county ordinances as of April 2022. A setback requirement is a minimum distance from a road that an energy project may be developed, and these varied widely across the counties in which they existed. Two...

Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)

Jan 01, 2024
5 Resources
0 Stars
Publicly accessible

Aquantis 2.5 MW Ocean Current Generation Device Tow Tank Dynamic Test Rig Drawings and Bill of Materials

Aquantis 2.5 MW Ocean Current Generation Device, Tow Tank Dynamic Test Rig Drawings and Bill of Materials. This submission contains information on the equipment for the scaled model tow tank testing. The information includes hardware, test protocols, and plans.

Swales, H. et al Dehlsen Associates, LLC

Jun 03, 2015
18 Resources
0 Stars
Publicly accessible

Reference Model 2 Full Scale Geometry (RM2: River Current Turbine)

Contains the Reference Model 2 (RM2) full scale geometry files of the River Current Turbine, developed by the Reference Model Project (RMP). These full scale geometry files are saved as SolidWorks assembly, IGS, X_T, and STEP files, and require a CAD program to view. This data was...

Neary, V. et al Sandia National Laboratories

Sep 30, 2014
5 Resources
0 Stars
Publicly accessible

TEAMER: FOSWEC Mooring Modeling and Analysis, Post Access Report and Data

Floating oscillating surge wave energy converters (FOSWECs) offer several advantages over bottom-hinged oscillating surge wave energy converters, including large wave potential at deep-water sites with fewer permitting and environmental concerns outside territorial waters. As a te...

Housner, S. et al Virginia Tech

Jun 14, 2022
10 Resources
0 Stars
Publicly accessible

Subsurface Characterization and Machine Learning Predictions at Brady Hot Springs

Subsurface data analysis, reservoir modeling, and machine learning (ML) techniques have been applied to the Brady Hot Springs (BHS) geothermal field in Nevada, USA to further characterize the subsurface and assist with optimizing reservoir management. Hundreds of reservoir simulat...

Beckers, K. et al National Renewable Energy Laboratory

Feb 18, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Optimization of a Plug-and-Perf Stimulation (Fervo Energy)

Information around the plug-and-perf treatment design at Utah FORGE by Fervo Energy. Objective and Purpose: Develop a multistage hydraulic stimulation approach designed specifically to target the top three factors that control the technical and commercial viability of an EGS sys...

Norbeck, J. et al Fervo Energy

Feb 08, 2023
3 Resources
0 Stars
Publicly accessible

WHOLESCALE: Seismic Waveform Data from San Emidio, Nevada 2022

Included here is a link to seismic waveform data collected at San Emidio, Nevada in 2022. The seismic instruments used were provided by EarthScope Consortium through the EarthScope Primary Instrument Center at New Mexico Tech. Data collected are available here through EarthScope ...

Lord, N. et al University of Wisconsin Madison

Apr 05, 2022
3 Resources
0 Stars
Publicly accessible

Data from USGS World Petroleum Assessment (2000)

This is the supporting data for the USGS World Petroleum Assessment, published in 2000. The assessment is the result of a five year effort to estimate the quantities of conventional oil, gas, and natural gas liquids outside the US that have the potential to be added to the reserve...

Hallett, K. and USGS, . National Renewable Energy Laboratory

Dec 30, 2000
5 Resources
0 Stars
In curation

Brady Well Coordinates and Observation Sensor Depths

Contains metadata associated with the wells used in the 2016 Spring Campaign led partially by UW Madison, LBNL, and LLNL scientists. Included with the well coordinates are the depths to the pressure sensors used in observation and pumping wells. Read me files are included for each...

Lim, D. University of Wisconsin

Mar 13, 2016
4 Resources
0 Stars
Publicly accessible

Geothermal Life Cycle Calculator

This calculator is a handy tool for interested parties to estimate two key life cycle metrics, fossil energy consumption (Etot) and greenhouse gas emission (ghgtot) ratios, for geothermal electric power production. It is based solely on data developed by Argonne National Laborator...

Sullivan, J. Argonne National Laboratory

Mar 11, 2014
1 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System OpenFOAM Version 5 CFD Case Files

The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power system consists of three major subsystems: shore-side power electronics, mooring system, and turbine generator unit (TGU...

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
1 Resources
0 Stars
Publicly accessible

RivGen Open Water Installation Report

The purpose of the Open Water Deployment Report is to provide an overview of the installation of the Ocean Renewable Power Company (ORPC) RivGen 2.0 Power System in Igiugig, AK, in 2019 beginning with the transportation of the system to Igiugig and ending with the deployment of th...

Tyler, R. Igiugig Village Council

Nov 01, 2019
1 Resources
0 Stars
Publicly accessible

Slip and Dilation Tendency Analysis of McGinness Hills Geothermal Area

Slip and Dilation Tendency in focus areas Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip (slip tendency; Ts; Morris et al., 1996) or to dilate (dilation tendency...

E., J. University of Nevada

Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

Slip and Dilation Tendency Analysis of the Tuscarora Geothermal Area

Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip (slip tendency; Ts; Morris et al., 1996) or to dilate (dilation tendency; Td; Ferrill et al., 1999) provides an in...

E., J. University of Nevada

Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

Field Testing of Compartmentalization Methods for Multifamily Construction Washington DC

BSC TO5 Task 2.1 Field Testing of Compartmentalization Methods for Multifamily Construction Capitol Heights, MD 20743 A building comprising five vertical townhome units was built in the Washington, D.C., area; the townhomes were three-story slab-on-grade units (1700-2000 ft2) wit...

Ueno, K. and Lstiburek, J. Building Science Corporation

Apr 27, 2016
22 Resources
0 Stars
Publicly accessible

NREL EFM DATA: Disaggregated Residential Load Cost Data

The following data-set is for a benchmark residential home for all TMY3 locations across all utilities in the US. The data is indexed by utility service provider which is described by its "unique" [EIA ID](https://www.eia.gov/electricity/data/eia861/), e.g. field A14 references "3...

Clark, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Preliminary Geologic Map of the Tuscarora Geothermal Area, Elko County, Nevada

Preliminary geologic map, unit descriptions, and cross-sections of the Tuscarora geothermal area. The files within the zip are all in pdf format. The the two maps include rock and mineral deposits from different geologic time scales. Units, legend, and scales can be found on each ...

Derling, G. and Faulds, J. University of Nevada

Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

<< Previous 10 11 12 13 14 15 16 17 18 19 Next >>