Search OEDI Data

Utah FORGE: Pump and Probe Test on an Intact Westerly Granite Sample

This dataset contains results from a pump and probe experiment conducted on an intact Westerly Granite sample with a diameter of 1 inch and a height of 1 3/8 inches. The experiment was performed within an aluminum triaxial pressure vessel (TEMCO) to investigate the non-linear acou...

Klinghammer, H. et al Pennsylvania State University

May 21, 2024
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Pump and Probe Test on a Mated Fracture Westerly Granite Sample

This dataset contains results from a pump and probe experiment conducted on a mated fracture Westerly Granite sample with a diameter of 1 inch and a height of 2 7/8 inches. The experiment was performed within an aluminum triaxial pressure vessel (TEMCO) to investigate the non-line...

Klinghammer, H. et al Pennsylvania State University

May 19, 2024
4 Resources
0 Stars
Publicly accessible

Active Source 3D Seismic Tomography of Brady Hot Springs Geothermal Field, Nevada

We deployed a dense seismic array to image the shallow structure in the injection area of the Brady Hot Springs geothermal site in Nevada. The array was composed of 238 5 Hz, three-component nodal instruments and 8,700 m of distributed acoustic sensing (DAS) fiber-optic cable inst...

Parker, L. University of Wisconsin

Aug 09, 2017
1 Resources
0 Stars
Publicly accessible

Admiralty Inlet Hub-Height Turbulence Measurements from June 2012

This data is from measurements at Admiralty Head, in Admiralty Inlet. The measurements were made using an IMU equipped ADV mounted on a mooring, the 'Tidal Turbulence Mooring' or 'TTM'. The inertial measurements from the IMU allows for removal of mooring motion in post processing....

Kilcher, L. National Renewable Energy Laboratory

Jun 18, 2012
7 Resources
0 Stars
Publicly accessible

Utah FORGE: Slide-Hold-Slide Experiments on Gneiss at Increased Temperature

Included are data from triaxial, single-inclined-fracture friction experiments. The experiments were performed with slide-hold-slide protocol on Utah FORGE gneiss at increased temperature. With a ~10 MPa normal stress, temperatures vary between experiments from room temperature u...

Eijsink, A. and Elsworth, D. Pennsylvania State University

Jul 25, 2023
24 Resources
0 Stars
Publicly accessible

Material Properties for Brady Hot Springs Nevada USA from PoroTomo Project

The PoroTomo team has completed inverse modeling of the three data sets (seismology, geodesy, and hydrology) individually, as described previously. The estimated values of the material properties are registered on a three-dimensional grid with a spacing of 25 meters between nodes....

Feigl, K. and PoroTomo Team, . University of Wisconsin

Mar 06, 2019
10 Resources
0 Stars
Publicly accessible

Snake River Plain Geothermal Play Fairway Analysis Project Active Source Seismic Data

This archive contains seismic shot field records for 10 profiles located in Camas Prairie, Idaho. The eight numbered .sgy files were acquired using a seismic land streamer system with an accelerated weight drop source and 72 geophones. These 10-Hz geophones were mounted on base pl...

Liberty, L. and Shervais, J. Boise State University

Sep 30, 2018
21 Resources
0 Stars
Publicly accessible

Version 2 Tidal Energy Resource Characterization, Velocity and Turbulence Measurements, Cook Inlet, AK, 2021

Version 2 of MHKDR submission #475, which also contains the metadata for these measurements. Files here are stored in netCDF4 format, which can be read in Python using the "netcdf4" or "xarray" packages or in MATLAB using the "ncread()" function. Changes are as follows: MWM1 (mi...

Kilcher, L. and McVey, J. Pacific Northwest National Laboratory

Jul 01, 2021
9 Resources
0 Stars
Publicly accessible

Miller & Keith (2018) Wind Plant Data

Information on the 430 wind power plants used in 'Observation-based solar and wind power capacity factors and power densities’ by Miller & Keith (2018, Environ. Res. Lett. 13 104008), initially based on the Wind Power Plant locations released by the US Energy Information Adminis...

Miller, L. Harvard University

Nov 22, 2018
2 Resources
0 Stars
In curation

TEAMER: Drifting Hydrophone System Block Diagram and Pre-Amplifier Calibrations

This data release is part of TEAMER RFTS 2, where the Cooperative Institute for Marine Resources Studies (CIMRS) at Oregon State University is performing hardware and software development and integration of four newly designed drifting hydrophone systems for underwater noise measu...

Turnbull, J. et al Pacific Marine Energy Center (PMEC)

Feb 26, 2024
3 Resources
0 Stars
Publicly accessible

Topology-Based Machine-Learning for Modeling Power-System Responses to Contingencies

This is the companion dataset to the presentation NREL/PR-6A20-77485, which was presented at the 2020 Joint Statistical Meeting on August 3, 2020. Developed for the machine-learning predictive modeling of power-system responses to disruptions, it contains results of power-system c...

BushNational Renewable Energy Laboratory

Aug 01, 2020
2 Resources
0 Stars
Publicly accessible

Load-Packaged AC/DC and DC/DC Power Electronics Converter Performance Data

This data set contains experimentally characterized performance data from load-packaged alternating current to direct current (AC/DC) and direct current to direct current (DC/DC) power electronics converters associated with lighting devices and miscellaneous electrical loads typic...

Santos. . et al National Renewable Energy Laboratory

Apr 13, 2022
96 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System OpenFOAM Version 5 CFD Case Files

The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power system consists of three major subsystems: shore-side power electronics, mooring system, and turbine generator unit (TGU...

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
1 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System ProteusDS Version 2.43.5 Files

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
1 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Material Set Selection

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
1 Resources
0 Stars
Publicly accessible

Directional Cooling-Induced Fracturing Westerly Granite Test Results

Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on a short, cylindrical sample of Westerly granite (diameter = 4 inches, height ~ 2 inches). Liquid nitrogen was poured in a copper cup attached to the top of the sample, and the resulting acoustic emissions ...

Nakagawa, S. Lawrence Berkeley National Laboratory

Dec 18, 2020
5 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Preliminary Report on Development of a Reservoir Seismic Velocity Model

This report describes the development of a preliminary 3D seismic velocity model at the Utah FORGE site and first results from estimating seismic resolution in the generated fracture volume during Stage 3 of the April 2022 stimulation. A preliminary 3D velocity model for the larg...

Gritto, R. Array Information Technology

Jan 30, 2023
1 Resources
0 Stars
Publicly accessible

Verdant Power Gen5 KHPS and TriFrame System Content Models

This submission includes the Component Content Model for Verdant Power TriFrame and the System Content Model for Verdant Power TriFrame + 3 Gen5 KHPS Turbines. The TriFrame is the foundation component of the system, which consists of a TriFrame + 3 Gen5 KHPS Turbines (TF+3T).

Corren, D. et al Verdant Power Inc.

Jul 05, 2018
2 Resources
0 Stars
Publicly accessible

Verdant Power TriFrame, Gen5 KHPS Turbine, and BOP System Content Models

This submission includes System Content Models with data following manufacture for the Verdant Power TriFrame, Gen5 Kinetic Hydropower System (KHPS) Turbines, and Balance of Plant (BOP). The TriFrame installs 3 Gen5 KHPS Turbines. The BOP system controls the turbines and interconn...

Corren, D. et al Verdant Power Inc.

Mar 31, 2020
3 Resources
0 Stars
Publicly accessible

<< Previous 7 8 9 10 11 12 13 14 15 16 Next >>

Search OEDI Data

Order by:

Available Now:

Utah FORGE: Pump and Probe Test on an Intact Westerly Granite Sample

Utah FORGE: Pump and Probe Test on a Mated Fracture Westerly Granite Sample

Active Source 3D Seismic Tomography of Brady Hot Springs Geothermal Field, Nevada

Admiralty Inlet Hub-Height Turbulence Measurements from June 2012

Utah FORGE: Slide-Hold-Slide Experiments on Gneiss at Increased Temperature

Material Properties for Brady Hot Springs Nevada USA from PoroTomo Project

Snake River Plain Geothermal Play Fairway Analysis Project Active Source Seismic Data

Version 2 Tidal Energy Resource Characterization, Velocity and Turbulence Measurements, Cook Inlet, AK, 2021

Miller & Keith (2018) Wind Plant Data

TEAMER: Drifting Hydrophone System Block Diagram and Pre-Amplifier Calibrations

Topology-Based Machine-Learning for Modeling Power-System Responses to Contingencies

Load-Packaged AC/DC and DC/DC Power Electronics Converter Performance Data

Advanced TidGen Power System OpenFOAM Version 5 CFD Case Files

Advanced TidGen Power System ProteusDS Version 2.43.5 Files

Advanced TidGen Power System Material Set Selection

Directional Cooling-Induced Fracturing Westerly Granite Test Results

Utah FORGE 3-2535: Preliminary Report on Development of a Reservoir Seismic Velocity Model

Verdant Power Gen5 KHPS and TriFrame System Content Models

Verdant Power TriFrame, Gen5 KHPS Turbine, and BOP System Content Models

Advanced TidGen Power System Environmental Assessment

Advanced TidGen Power System 2.0 Presentation of System

Advanced TidGen Power System Development Test Plan

Advanced TidGen Power System Final System Design Technical Report

Advanced TidGen Power System Summary Presentation

Advanced TidGen Power System System Fabrication Plan