Search OEDI Data

WaterTAP3 Model Results for NAWI's Baseline Analyses

Description: This folder contains the results for the WaterTAP3 model that was used for the eight NAWI (National Alliance for Water Innovation) baseline studies published in the Environmental Science and Technology special issue: Technology Baselines and Innovation Priorities for ...

Miara, A. et al National Renewable Energy Laboratory

Feb 01, 2022
10 Resources
0 Stars
Publicly accessible

TEAMER AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation

Collaborative effort between AquaHarmonics, Sandia National Laboratories (SNL), and the National Renewable Energy Laboratory (NREL) to revise and validate Aquaharmonics' full wave to wire model, allowing for reduced uncertainty and increased understanding of design requirements of...

Tom, N. and Leon, J. AquaHarmonics, Inc.

Dec 31, 2021
5 Resources
0 Stars
Publicly accessible

RANS Simulation VBM of Single Lab Scaled DOE RM1 MHK Turbine

Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. The lab-scaled DOE RM1 is a re-design geometry, based of the full scale DOE RM1 design, producing same po...

Javaherchi, T. et al University of Washington (NNMREC)

Apr 15, 2014
8 Resources
0 Stars
Publicly accessible

Energy and Economic Assessment of a Stirling Engine Powered by Solar Energy in Bolivia

The Bolivian governments concerns that are related to reducing the consumption of diesel fuel, which is imported, subsidized, and provided to isolated electric plants in rural communities, have led to the implementation of hybrid power systems. The data in this submissions was cre...

Jimenez, P. San Simon University

Dec 10, 2021
5 Resources
0 Stars
Publicly accessible

Mass of Water Turbine Current Energy Converter CFD Results

The CFD (computational fluid dynamics) results for the Mass of Water Turbine (MOWT) current energy converter from MWNW Consulting (formerly Ecosse IP). Each case is self-contained in its own tar.gz archive file. The archive contains the scripts required to perform a full simulati...

Chartrand, C. and Moir, S. Sandia National Laboratories

May 27, 2022
75 Resources
0 Stars
Publicly accessible

Utah FORGE Phase 3 Native State Model: 2022 Update

This is the Phase 3 native state model update. The Phase 3 numerical model represents a significant subsurface volume below the FORGE site footprint. The model domain of 4.0 km x 4.0 km x 4.2 km is located approximately between depths of 4000 to 4200 meters below land surface. Thi...

Podgorney, R. and Liu, R. Idaho National Laboratory

Jul 29, 2022
1 Resources
0 Stars
Publicly accessible

Brady 1D Seismic Velocity Model Ambient Noise Prelim

Preliminary 1D seismic velocity model derived from ambient noise correlation. 28 Green's functions filtered between 4-10 Hz for Vp, Vs, and Qs were calculated. 1D model estimated for each path. The final model is a median of the individual models. Resolution is best for the top 1 ...

J., R. Lawrence Livermore National Laboratory

Oct 25, 2013
1 Resources
0 Stars
Publicly accessible

Reference Model 1 Full Scale Geometry (RM1: Tidal Current Turbine)

Contains the Reference Model 1 (RM1) full scale geometry files of the Tidal Current Turbine, developed by the Reference Model Project (RMP). These full scale geometry files are saved as SolidWorks assembly, X_T, IGS, and STEP files, and require a CAD program to view. This data was...

Neary, V. et al Sandia National Laboratories

Sep 30, 2014
7 Resources
0 Stars
Publicly accessible

Utah FORGE: Earth Model Mesh Data for Selected Surfaces

This submission contains a number of data files with vertices of meshed/interpolated surfaces used in the Phase 2B earth model. Examples include land surface (based on 10-meter DEM), the granitoid-basin fill contact, several faults, and also interpolated temperature isosurfaces f...

Podgorney, R. Idaho National Laboratory

Dec 07, 2018
6 Resources
0 Stars
Publicly accessible

Gd Uptake Experiments for Preliminary Set of Functionalized Adsorbents (With Content Model)

These data summarize adsorption experiments conducted with Gd in 0.5 M NaCl. Results represent preliminary, proof-of-concept data utilizing fine-powder silica gel as the adsorbent support. Future testing will focus on larger, application-appropriate beads.

Noack, C. Carnegie Mellon University

Jul 01, 2015
1 Resources
0 Stars
Publicly accessible

Reference Model 6 Full Scale Geometry (RM6: Oscillating Water Column)

Contains the Reference Model 6 (RM6) full scale geometry files of the Oscillating Water Column, developed by the Reference Model Project (RMP). These full scale geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. This data was g...

Neary, V. et al Sandia National Laboratories

Sep 30, 2014
4 Resources
0 Stars
Publicly accessible

LCOE Content Model for the Heaving Point Absorber Buoy

This is the LCOE analysis spreadsheet and content model for the heaving point absorber buoy developed for controls purposes. The cost assessment was done on a wave-farm of 100-units.

Previsic, M. and Karthikeyan, A. Re Vision Consulting

Jul 14, 2017
3 Resources
0 Stars
Publicly accessible

NREL RSF Energy Model 2011

Modern buildings are complex energy systems that must be controlled for energy efficiency. The Research Support Facility (RSF) at the National Renewable Energy Laboratory (NREL) has hundreds of controllers computers that communicate with the building's various control systems to...

Sheppy, M. et al National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
Publicly accessible

Commercial and Residential Hourly Load Profiles for all TMY3 Locations in the United States

Note: This dataset has been superseded by the dataset found at "End-Use Load Profiles for the U.S. Building Stock" (submission 4520; linked in the submission resources), which is a comprehensive and validated representation of hourly load profiles in the U.S. commercial and reside...

Ong, S. and Clark, N. National Renewable Energy Laboratory

Nov 25, 2014
22 Resources
0 Stars
Curated

RANS Simulation RRF of Single Lab-Scaled DOE RM1 MHK Turbine

Javaherchi, T. et al University of Washington

Apr 15, 2014
3 Resources
0 Stars
Publicly accessible

Helium isotope study of Geothermal Features in Chile with Field and Laboratory Data

Helium isotope and stable isotope data from the El Tatio, Tinginguirica, Chillan, and Tolhuaca geothermal systems, Chile. Data from this submission are discussed in: Dobson, P.F., Kennedy, B.M., Reich, M., Sanchez, P., and Morata, D. (2013) Effects of volcanism, crustal thickness,...

Dobson, P. et al Lawrence Berkeley National Laboratory

Feb 11, 2013
2 Resources
0 Stars
Publicly accessible

Colorado Heat Flow Data from IHFC

This layer contains the heat flow sites and data of the State of Colorado compiled from the International Heat Flow Commission (IHFC) of the International Association of Seismology and Physics of the Earth's Interior (IASPEI) global heat flow database. The data include different i...

E., R. Flint Geothermal, LLC

Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

Geothermal Geodatabase for Routt Hot Springs, Routt County, Colorado

This geodatabase was built to cover several geothermal targets developed by Flint Geothermal in 2012 during a search for high-temperature systems that could be exploited for electric power development. Several of the thermal springs and wells in the Routt Hot Spring and Steamboat ...

Zehner, R. Flint Geothermal, LLC

Nov 01, 2012
1 Resources
0 Stars
Publicly accessible

Geothermal Geodatabase for Wagon Wheel Hot Springs, Mineral County, Colorado

Zehner, R. Flint Geothermal, LLC

Nov 01, 2012
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Evaluation of Potential Geochemical Responses to Injection in the FORGE Geothermal Reservoir

Plugging of fracture porosity from mineral precipitation due to injecting cold water into a a geothermal reservoir can impact the overall permeability of the fracture network in the reservoir. This can have serious ramifications on the efficiency of the geothermal resource. Geoche...

Patil, V. and Simmons, S. Energy and Geoscience Institute at the University of Utah

Apr 03, 2019
1 Resources
0 Stars
Publicly accessible

RN12 and RN30 Epidote anlayses

Results for laser ablation measurement of rare earth elements and electron microprobe analysis of major elements in hydrothermal epidote. Laser ablation measurements were completed using an Agilent 7700 quadrupole ICP-MS coupled with 193nm Photon Instruments Excimer laser.

Fowler, A. and Zierenberg, R. University of California

Jan 01, 2015
1 Resources
0 Stars
Publicly accessible

USWAN Model Hindcast East Coast Regional Model (ECoRM)

Summary tables and plots of six International Electrotechnical Commission (IEC) wave parameters, including time series, scatter plots, and tables summarizing model performance.

Neary, V. Sandia National Laboratories

Sep 29, 2017
2 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: 3D Temperature Model

x,y,z data of the 3D temperature model for the West Flank Coso FORGE site. Model grid spacing is 250m. The temperature model for the Coso geothermal field used over 100 geothermal production sized wells and intermediate-depth temperature holes. At the near surface of this model,...

Blankenship, D. Sandia National Laboratories

Mar 01, 2016
1 Resources
0 Stars
Publicly accessible

Design of high-deflection foils MHK applications CFD models Helical turbines

The Ocean Renewable Power Company's (ORPC's) goal is to design, develop, and test hydrofoils with large deflections. The effects of the deflections on cross-flow turbine performance would be evaluated in order to inform design considerations for full-scale water turbines and other...

Barrington, M. and McEntee, J. Ocean Renewable Power Company

Nov 01, 2021
2 Resources
0 Stars
Publicly accessible

Global Value Chain and Manufacturing Analysis on Geothermal Power Plant Turbines

In this study, we have undertaken a robust analysis of the global supply chain and manufacturing costs for components of Organic Rankine Cycle (ORC) Turboexpander and steam turbines used in geothermal power plants. We collected a range of market data influencing manufacturing from...

Akar, S. et al National Renewable Energy Laboratory

Mar 30, 2018
6 Resources
0 Stars
Publicly accessible

<< Previous 5 6 7 8 9 10 11 12 13 14 Next >>