Utah FORGE 5-2419: Temperature Testing of Proppants for EGS and Stimulation of Electromagnetic Fracture Mapping Using Electrically-Conducive Proppants - 2024 Annual Workshop Presentation
This is a presentation on the Temperature Testing of Proppants for EGS and Stimulation of Electromagnetic Fracture Mapping Using Electrically-Conducive Proppants by Stevens Institute of Technology, presented by Cheng Chen. This video slide presentation discusses well controlled laboratory experiments testing the high-temperature performance of electrically-conductive and non-electrically-conductive proppants in maintaining fractures hydraulic and electrical conductivities to understand and quantify the thermal-hydrologic-mechanical-chemical mechanisms that regulate the observed behaviors. This will be tested using proppant/fracture imaging via borehole electromagnetic measurements. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 15, 2024.
Citation Formats
TY - DATA
AB - This is a presentation on the Temperature Testing of Proppants for EGS and Stimulation of Electromagnetic Fracture Mapping Using Electrically-Conducive Proppants by Stevens Institute of Technology, presented by Cheng Chen. This video slide presentation discusses well controlled laboratory experiments testing the high-temperature performance of electrically-conductive and non-electrically-conductive proppants in maintaining fractures hydraulic and electrical conductivities to understand and quantify the thermal-hydrologic-mechanical-chemical mechanisms that regulate the observed behaviors. This will be tested using proppant/fracture imaging via borehole electromagnetic measurements. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 15, 2024.
AU - Chen, Cheng
A2 - Torres-Verdin, Carlos
A3 - Miskimins, Jennifer
A4 - Yin, Xiaolong
A5 - Bazazi, Parisa
DB - Open Energy Data Initiative (OEDI)
DP - Open EI | National Renewable Energy Laboratory
DO - 10.15121/2441433
KW - geothermal
KW - energy
KW - Utah FORGE
KW - Stevens Institute of Technology
KW - proppants
KW - electrically-conductive
KW - non-electrically-conductive
KW - EGS
KW - fractures
KW - proppant/fracture imaging
KW - video
KW - presentation
LA - English
DA - 2024/09/14
PY - 2024
PB - Energy and Geoscience Institute at the University of Utah
T1 - Utah FORGE 5-2419: Temperature Testing of Proppants for EGS and Stimulation of Electromagnetic Fracture Mapping Using Electrically-Conducive Proppants - 2024 Annual Workshop Presentation
UR - https://doi.org/10.15121/2441433
ER -
Chen, Cheng, et al. Utah FORGE 5-2419: Temperature Testing of Proppants for EGS and Stimulation of Electromagnetic Fracture Mapping Using Electrically-Conducive Proppants - 2024 Annual Workshop Presentation. Energy and Geoscience Institute at the University of Utah, 14 September, 2024, GDR. https://doi.org/10.15121/2441433.
Chen, C., Torres-Verdin, C., Miskimins, J., Yin, X., & Bazazi, P. (2024). Utah FORGE 5-2419: Temperature Testing of Proppants for EGS and Stimulation of Electromagnetic Fracture Mapping Using Electrically-Conducive Proppants - 2024 Annual Workshop Presentation. [Data set]. GDR. Energy and Geoscience Institute at the University of Utah. https://doi.org/10.15121/2441433
Chen, Cheng, Carlos Torres-Verdin, Jennifer Miskimins, Xiaolong Yin, and Parisa Bazazi. Utah FORGE 5-2419: Temperature Testing of Proppants for EGS and Stimulation of Electromagnetic Fracture Mapping Using Electrically-Conducive Proppants - 2024 Annual Workshop Presentation. Energy and Geoscience Institute at the University of Utah, September, 14, 2024. Distributed by GDR. https://doi.org/10.15121/2441433
@misc{OEDI_Dataset_7720,
title = {Utah FORGE 5-2419: Temperature Testing of Proppants for EGS and Stimulation of Electromagnetic Fracture Mapping Using Electrically-Conducive Proppants - 2024 Annual Workshop Presentation},
author = {Chen, Cheng and Torres-Verdin, Carlos and Miskimins, Jennifer and Yin, Xiaolong and Bazazi, Parisa},
abstractNote = {This is a presentation on the Temperature Testing of Proppants for EGS and Stimulation of Electromagnetic Fracture Mapping Using Electrically-Conducive Proppants by Stevens Institute of Technology, presented by Cheng Chen. This video slide presentation discusses well controlled laboratory experiments testing the high-temperature performance of electrically-conductive and non-electrically-conductive proppants in maintaining fractures hydraulic and electrical conductivities to understand and quantify the thermal-hydrologic-mechanical-chemical mechanisms that regulate the observed behaviors. This will be tested using proppant/fracture imaging via borehole electromagnetic measurements. This presentation was featured in the Utah FORGE R\&D Annual Workshop on August 15, 2024.
},
url = {https://gdr.openei.org/submissions/1650},
year = {2024},
howpublished = {GDR, Energy and Geoscience Institute at the University of Utah, https://doi.org/10.15121/2441433},
note = {Accessed: 2025-05-03},
doi = {10.15121/2441433}
}
https://dx.doi.org/10.15121/2441433
Details
Data from Sep 14, 2024
Last updated Sep 17, 2024
Submitted Sep 14, 2024
Organization
Energy and Geoscience Institute at the University of Utah
Contact
Sean Lattice
801.581.3547
Authors
Original Source
https://gdr.openei.org/submissions/1650Research Areas
Keywords
geothermal, energy, Utah FORGE, Stevens Institute of Technology, proppants, electrically-conductive, non-electrically-conductive, EGS, fractures, proppant/fracture imaging, video, presentationDOE Project Details
Project Name Utah FORGE
Project Lead Lauren Boyd
Project Number EE0007080