Search OEDI Data

Moisture Risk in Unvented Attics Due to Air Leakage Paths Minneapolis Minnesota

IBACOS completed an initial analysis of moisture damage potential in an unvented attic insulated with closed-cell spray polyurethane foam. To complete this analysis, the research team collected field data, used computational fluid dynamics to quantify the airflow rates through ind...

Rapport, A. et al Ibacos Innovation

Apr 27, 2016
6 Resources
0 Stars
Publicly accessible

Subsurface Characterization and Machine Learning Predictions at Brady Hot Springs Results

Geothermal power plants typically show decreasing heat and power production rates over time. Mitigation strategies include optimizing the management of existing wells increasing or decreasing the fluid flow rates across the wells and drilling new wells at appropriate locations. Th...

Beckers, K. et al National Renewable Energy Laboratory

Oct 20, 2021
6 Resources
0 Stars
Publicly accessible

Utah FORGE: Earth Model Native State Simulation Results

Utah FORGE phase 2C Native State Simulation zip contains the data used for the boundary conditions and subsequent native state simulation results obtained using the simulation code FALCON. Data are from the nodes of the simulation domain, with used a uniform 50m spacing over a 250...

Podgorney, R. Energy and Geoscience Institute at the University of Utah

Jul 16, 2019
2 Resources
0 Stars
Publicly accessible

RANS Simulation ADM of the NREL Phase VI wind turbine modeled as MHK Turbine

Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. In this case study the flow field around and in the wake of the NREL Phase VI wind turbine, modeled is MH...

Javaherchi, T. University of Washington

Jun 08, 2016
3 Resources
0 Stars
Publicly accessible

EGS Collab: Modeling and Simulation Working Group Teleconference Series (1-98)

This submission contains the presentation slides and recordings from the first 98 EGS Collab Modeling and Simulation Working Group teleconferences. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field activities and resul...

White, M. et al Pacific Northwest National Laboratory

Feb 04, 2020
100 Resources
0 Stars
Publicly accessible

Block Scale Rooftop Solar Technical Potential for the City of Orlando

The html maps are provided as supplementary information for the publication titled Parcel Scale Assessment of Rooftop Solar Technical Potential (NREL/PR-7A40-80780). The maps contain information on rooftop solar technical potential at the block scale for the city of Orlando in Flo...

Prasanna, A. et al National Renewable Energy Laboratory

Nov 24, 2021
2 Resources
0 Stars
Publicly accessible

Virtual Real-Time Hybrid Simulation for Wave Energy Converter Mooring Lines

This submission contains the code, model files, and instructions required to virtually run a real-time hybrid simulation (RTHS) of a wave energy converter (WEC) mooring line model. The virtual RTHS (or VRTHS) couples a numerical model of the WEC with a numerical model of the moori...

Robertson, B. and McConnell, A. Oregon State University

Sep 22, 2026
1 Resources
0 Stars
Publicly accessible

Reverse Osmosis Simulation Data

This dataset consists of computational fluid dynamics (CFD) output for various spacer configurations in a feed-water channel in reverse osmosis (RO) applications. Feed-water channels transport brine solution to the RO membrane surfaces. The spacers embedded in the channels help im...

Nadakkal Appukuttan, S. et al National Renewable Energy Lab NREL

Apr 22, 2024
2 Resources
0 Stars
Publicly accessible

Thermal Drawdown-Induced Flow Channeling in a Single Fracture in EGS

The evolution of flow pattern along a single fracture and its effects on heat production is a fundamental problem in the assessments of engineered geothermal systems (EGS). The channelized flow pattern associated with ubiquitous heterogeneity in fracture aperture distribution caus...

Guo, B. et al Lawrence Livermore National Laboratory

Nov 15, 2015
1 Resources
0 Stars
Publicly accessible

ALFA Coupled Computational Fluid Dynamics/Discrete Element Method Modeling System

The HDIS/COUPi discrete element method modeling system was used to simulate the interaction between various debris and the Research Debris Diversion Platform (RDDP)

DUVOY, P. University of Alaska Fairbanks

Nov 29, 2016
11 Resources
0 Stars
Publicly accessible

Spooling control design for flight optimization of tethered tidal kites

This submission includes three peer-reviewed (under review) papers from the researchers at North Carolina State University presenting different control-based techniques to maximize the efficiency and robustness of a tethered energy-harvesting kite. Below are the abstracts of each ...

Daniels, J. et al North Carolina State University

Sep 16, 2019
3 Resources
0 Stars
Publicly accessible

TEAMER: OpenFAST Modeling and Simulation of the Aquantis AQ10 Marine Hydrokinetic Turbine

This dataset was developed under TEAMER technical support (CRD-21-17763-0) to model the Aquantis AQ10, a spar buoy-based marine hydrokinetic turbine, using the OpenFAST simulation framework. The project transitioned modeling from the proprietary Tidal Bladed tool to OpenFAST to en...

Swales, H. and Tran, T. Aquantis, Inc.

Jul 31, 2025
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Native State Model 2022 Update

This is the Phase 3 native state model update. The Phase 3 numerical model represents a significant subsurface volume below the FORGE site footprint. The model domain of 4.0 km x 4.0 km x 4.2 km is located approximately between depths of 4000 to 4200 meters below land surface. Thi...

Podgorney, R. and Liu, R. Idaho National Laboratory

Jul 29, 2022
1 Resources
0 Stars
Publicly accessible

Hathaway Solar Patriot House

The Hathaway Solar Patriot House was a Building America field research case study from 2001 to 2004. A report on this project is available in this record or from the National Renewable Energy Laboratory. http://www.nrel.gov/docs/fy05osti/37731.pdf

Norton, P. and Laboratory, N. National Renewable Energy Laboratory

Jun 10, 2016
4 Resources
0 Stars
In curation

TEAMER: CFD Simulation Datasets of Dehlsen Associates' Centipod Wave Energy Converter

This directory contains data-sets pertaining to the Computational Fluid Dynamics (CFD) modeling of Dehlsen Associates, LLC "Centipod 1P6" (C1P6) two-part point absorber wave energy converter (WEC) by Sandia National Labratory. This project is part of the TEAMER RFTS 11 (request fo...

Bayat, E. and Chartrand, C. Sandia National Laboratories

Apr 21, 2026
1 Resources
0 Stars
Publicly accessible

TEAMER: Deeply Embedded Ring Anchor Fatigue Life Optimization

The data provided in this submission contain the analysis input files and result post-processing spreadsheets and scripts to perform the CFD analysis, load case development, strength FEA, fatigue FEA, and optimization tasks outlined in the project report. Below is a summary of the...

Mane, S. et al Stress Engineering Services, Inc.

Jun 15, 2026
4 Resources
0 Stars
Publicly accessible

TEAMER: Reliability Analysis and New Technology Qualification of an Infinitely Variable Transmission for Tidal Energy Converters

This project leverages the complementary expertise of American Bureau of Shipping (ABS) and Idaho National Laboratory (INL) to establish a comprehensive qualification and reliability assessment framework for an infinitely variable transmission (IVT). INL will implement an advanced...

Zhang, X. et al Mississippi State University

Aug 21, 2026
15 Resources
0 Stars
Publicly accessible

EGS Collab: Modeling and Simulation Working Group Teleconference Series (129-130)

This submission contains the presentation slides and recordings from EGS Collab Modeling and Simulation Working Group (MSWG) teleconferences number 129 through 130. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field act...

White, M. et al Pacific Northwest National Laboratory

Jun 22, 2022
3 Resources
0 Stars
Publicly accessible

Fallon FORGE: Thermal-Hydrological-Mechanical Models

Archive contains thermal-mechanical simulation input/output files. Included are files which fall into the following categories: ( 1 ) Spreadsheets with various input parameter calculations ( 2 ) Final Simulation Inputs ( 3 ) Native-State Thermal-Hydrological Model Input File Fol...

Blankenship, D. and Sonnenthal, E. Sandia National Laboratories

Mar 12, 2018
2 Resources
0 Stars
Publicly accessible

1D Heat Loss Models Validation Experiment

Contains data from the model validation in the 1D Heat Loss Models to Predict the Aquifer Temperature Profile during Hot/Cold Water Injection Project. The data include two COMSOL models (2D axisymmetric benchmark model and 2D Vinsome model), one python code (1D Vinsome based FEM n...

Chen, K. et al UC Berkeley

Jan 18, 2022
8 Resources
0 Stars
Publicly accessible

Hydroshear Simulation Lab Test 3.2

This data file is for the hydroshear simulation lab test 3.2. The two previous hydroshear simulation lab tests are linked in the resources section as GDR submissions. In this test a sample of granite with a pre-cut (man made fracture) is confined, heated and differential stress is...

Bauer, S. Sandia National Laboratories

Aug 01, 2014
4 Resources
0 Stars
Publicly accessible

TEAMER: Over-voltage Protection of Direct Drive Wave Power System (WPS) Electrical Components Public Release

Public data, results, and final report from a study on methods to design and optimize an over-voltage protection (OVP) system for a floating, two-body Wave Power System (WPS). The work has been performed by assessing the conditions under which hydrodynamically induced transient ov...

Swindler, S. et al Cardinal Engineering

May 01, 2026
10 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Simulation Meshes and Results from Extended Circulation and Pulse Interference Testing

This dataset contains numerical simulation meshes and modeling results from extended circulation and pulse interference tests conducted between Utah FORGE wells 16A(78)-32 and 16B(78)-32. The simulations were performed as part of the FOGMORE Utah FORGE project (Fiber Optic MOnitor...

Lee, S. and Ghassemi, A. Rice University

Sep 05, 2025
4 Resources
0 Stars
Publicly accessible

Achieving Challenge Home in Affordable Housing in the Hot Humid Climate

The Building America Partnership for Improved Residential Construction (BA-PIRC), one of the Building America research team leads, has partnered with two builders as they work through the Challenge Home certification process in one test home each. The builder partners participatin...

Beal, D. et al University of Central Florida Florida Solar Energy Center

Apr 27, 2016
9 Resources
0 Stars
Publicly accessible

TEAMER: Stage 2 Resource Assessment Study of Long Island Sound Tidal Resource in New York State Waters Based on Numerical Modeling Immediate Release

This dataset comprises high-resolution Finite Volume Community Ocean Model (FVCOM) hydrodynamic model output for a portion of eastern Long Island Sound (LIS) developed under a project with Verdant Power, with technical assistance from PNNL. The project applied a high fidelity nume...

Spicer, P. and Yang, Z. Pacific Northwest National Laboratory

Aug 25, 2026
2 Resources
0 Stars
Publicly accessible

<< Previous 2 3 4 5 6 7 8 9 10 11 Next >>