Search OEDI Data

Showing results 126 - 150 of 1527.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Research Areas
Accessibility
Data Type
Organization
Source
"geothermal well 71-10"×
Downloadable×

Temperature and Pressure Data Brady Monitoring Well SP-2

Static Pressure and Temperature Log for Brady monitor well SP-2. This data was taken from Well SP-2 which is part of the Brady Hot Springs Geothermal Site. The data contains pressure and temperature vs depth data for RIH (run in hole) Static conditions and POOH (pull out of hole) ...
Akerley, J. University of Wisconsin
Jan 01, 2015
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Regional Well Locations

This archive contains a GIS point feature shapefile that shows the locations of wells in the general region of the Utah FORGE project, near Roosevelt Hot Springs. This includes Utah FORGE deep well 58-32 and wells for which data has been uploaded to the Geothermal Data Repository....
Nash, G. Energy and Geoscience Institute at the University of Utah
Feb 22, 2018
1 Resources
0 Stars
Publicly accessible

Brady Geothermal 1D Seismic Velocity Model

This submission contains an ASCII text file of seismic velocities derived from ambient noise cross-correlation used to create a model of seismic velocity as a 1-D function of depth in addition to a quarterly report describing the creation and use of the model. Model uses 28 Green'...
Matzel, E. Lawrence Livermore National Laboratory
Feb 17, 2015
2 Resources
0 Stars
Publicly accessible

The Value of Spatial Information for Determining Well Placement

The article and accompanying spreadsheet represent the information posteriors derived from synthetic data of magnetotellurics (MT). These were used to calculate value of information of MT for geothermal exploration. Information posteriors describe how well MT was able to locate t...
Trainor-Guitton, W. et al Lawrence Livermore National Laboratory
May 12, 2014
2 Resources
0 Stars
Publicly accessible

Preliminary Analysis of Stress in the Newberry EGS Well NWG 55-29

As part of the planning for stimulation of the Newberry Volcano Enhanced Geothermal Systems (EGS) Demonstration project in Oregon, a high-resolution borehole televiewer (BHTV) log was acquired using the ALT ABI85 BHTV tool in the slightly deviated NWG 55-29 well. The image log rev...
Davatzes, N. and Hickman, S. National Energy Technology Laboratory
Jan 01, 2011
1 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: 52B-7 Image and Mud Log

FMI image log and mud log of well 52B-7
Blankenship, D. Sandia National Laboratories
Apr 01, 1992
2 Resources
0 Stars
Publicly accessible

Geologic Map and Cross Sections of the McGinness Hills Geothermal Area GIS Data

Geologic map data in shapefile format that includes faults, unit contacts, unit polygons, attitudes of strata and faults, and surficial geothermal features. 5 cross-sections in Adobe Illustrator format. Comprehensive catalogue of drill-hole data in spreadsheet, shapefile, and Ge...
E., J. University of Nevada
Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

Stability of Elastomers Subjected to Geothermal Well-Like Conditions

The aim of this study is to understand how commercially available elastomers perform under geothermal well-like conditions and make recommendations to the community based on these results. This poster highlights the mechanical performance of several elastomers (including EPDM, Vit...
Redline, E. et al Sandia National Laboratories
Aug 10, 2014
1 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: 33A-7 Image and Mud Log Data

Circumferential Borehole Imaging Log (CBIL) image log as DLIS file, and PDF mud log of well 33A-7 as part of the West Flank Coso, CA FORGE site.
Blankenship, D. Sandia National Laboratories
Apr 08, 2010
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 (MU-ESW1) FMI Log Fracture Results

A Schlumberger Fullbore Formation Micro-Imager (FMI) log was run from 7390 feet to 7527 feet depth in well 58-32, originally known as well MU-ESW1. Well 58-32 was completed in 2017 as part of Utah FORGE Phase 2. It reached a depth of 7536 feet and recorded a bottom hole temperatur...
BLOCHOWICZ, A. Energy and Geoscience Institute at the University of Utah
Mar 06, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well Data for Student Competition

Well 58-32 (previously labeled MU-ESW1) was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. Well Accord-1 was drilled decades ago for geothermal exploration purposes. While ...
Podgorney, R. et al Idaho National Laboratory
Dec 07, 2018
12 Resources
0 Stars
Publicly accessible

Utah FORGE: Optimization of a Plug-and-Perf Stimulation (Fervo Energy)

Information around the plug-and-perf treatment design at Utah FORGE by Fervo Energy. Objective and Purpose: Develop a multistage hydraulic stimulation approach designed specifically to target the top three factors that control the technical and commercial viability of an EGS sys...
Norbeck, J. et al Fervo Energy
Feb 08, 2023
3 Resources
0 Stars
Publicly accessible

University of Illinois Campus Deep Direct-Use Feasibility Study Design of Injection Well #1 (CCS1)

Includes specification sheet, wellbore geometry, and drilling fluids at section target depth associated with the design of Injection Well #1 (CCS1) for the Illinois Basin Decatur Project (IBDP).
Greenberg, S. University of Illinois
Mar 30, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Stimulation Data

Pressure, temperature, and flow data from open-hole, upper perforation, and lower perforation well stimulations gathered from various tools collected at well 58-32 during phase 2C.
Best, S. Geothermal Resource Group
Apr 20, 2019
16 Resources
0 Stars
Publicly accessible

Brady Geothermal Field Well Pumping Data During Deployment

Contains pumping data associated with the wells used in the 2016 Spring Campaign led partially by UW Madison, LBNL, and LLNL scientists. The well coordinates and the depths to the pressure sensors used in the pumping wells can be found at the link "Coordinates and Sensor Depths" b...
Feigl, K. University of Wisconsin
Mar 30, 2016
3 Resources
0 Stars
Publicly accessible

Deep Sedimentary Basin EGS Development

Stratigraphic reservoirs with high permeability and temperature at economically accessible depths are attractive for power generation because of their large areal extent (> 100 km2) compared to the fault controlled hydrothermal reservoirs (< 10 km2) found throughout much of the we...
Allis, R. and Moore, J. University of Utah
Jan 24, 2013
1 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: Well Photos and Notes

Photos and detailed downhole lithology notes for wells CGEH-1 and 74-2 at the West Flank Coso, Ca FORGE location.
Blankenship, D. Sandia National Laboratories
Dec 21, 2015
1 Resources
0 Stars
Publicly accessible

Altona Well Field 222Rn Data

Field data and 222Rn activities from the Altona well field. 222Rn, the most stable isotope of radon, was tested for during well extraction experiments. Tracers were also tracked to monitor the well. Data include 222Rn activities and complimentary geochemical data for multiple fiel...
Brown, S. Lawrence Berkeley National Laboratory
Mar 08, 2017
1 Resources
0 Stars
Publicly accessible

SW New Mexico Play Fairway Analysis: Oil Well Formation Tops

Rock formation top picks from oil wells from southwestern New Mexico from scout cards and other sources. There are differing formation tops interpretations for some wells, so for those wells duplicate formation top data are presented in this file.
Kelley, S. New Mexico Bureau of Geology and Mineral Resources
Oct 21, 2015
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Core Photos

Images of core samples collected from Utah FORGE well 16A(78)-32. These images were created by stitching together multiple photographs resulting in a circumferential view of the cores exterior in two dimensions. Core footages (measured depths) are indicated in the file names, and ...
Jones, C. Energy and Geoscience Institute at the University of Utah
Aug 11, 2021
1 Resources
0 Stars
Publicly accessible

Glass Mountain Fluid Inclusion Gas Analysis

Fluid inclusion gas analysis for wells in Glass Mountain geothermal area, California. Analyses used in developing fluid inclusion stratigraphy for wells and defining fluids across the geothermal fields. Each sample has mass spectrum counts for 180 chemical species.
Dilley, L. Hattenburg Dilley and Linnell
Jan 01, 2013
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Stimulation Conference Paper and Data

The U.S. Department of Energy's (U.S. DOE) Frontier Observatory for Research in Geothermal Energy (FORGE) is a field laboratory that provides a unique opportunity to develop and test new technologies for characterizing, creating and sustaining Enhanced Geothermal Systems (EGS) in ...
Best, S. Energy and Geoscience Institute at the University of Utah
Apr 24, 2019
2 Resources
0 Stars
Publicly accessible

Hydraulic Studies of Drilling Microbores with Supercritical Steam, Nitrogen and Carbon Dioxide

Hydraulic studies of drilling micropores at various depths and with various hole sizes, tubing, fluids and rates to show theoretical feasibility. WELLFLO Simulations Report separated into three parts: Step 4: Drilling 10,000 ft Wells with Supercritical Steam, Nitrogen, and Carbon...
Karaaslan, M. Impact Technologies LLC
Jan 01, 2010
3 Resources
0 Stars
Publicly accessible

India Direct Normal & Global Horizontal Irradiance Solar Resources

GIS data for India's direct normal irradiance (DNI) and global horizontal irradiance. Provides 10-kilometer (km) solar resource maps and data for India. The 10-km hourly solar resource data were developed using weather satellite (METEOSAT) measurements incorporated into a site-...
LopezNational Renewable Energy Laboratory
Apr 11, 2016
3 Resources
0 Stars
Publicly accessible

3D Model of the San Emidio Geothermal Area

The San Emidio geothermal system is characterized by a left-step in a west-dipping normal fault system that bounds the western side of the Lake Range. The 3D geologic model consists of 5 geologic units and 55 faults. Overlying Jurrassic-Triassic metasedimentary basement is a ~500 ...
E., J. University of Nevada
Dec 31, 2013
1 Resources
0 Stars
Publicly accessible
<< Previous12345678910Next >>