"Womp Womp! Your browser does not support canvas :'("

Reference Model 4 Cost Breakdown (RM4: Ocean Current Turbine)

Publicly accessible License 

Contains the Reference Model 4 (RM4) spreadsheets with the cost breakdown structure (CBS) for the levelized cost of energy (LCOE) calculations for a single RM4 device and multiple unit arrays. These spreadsheets are contained within an XLSX file and a spreadsheet editor such as Microsoft Excel is needed to open the file. This data was generated upon completion of the project on September 30, 2014.

The Reference Model Project (RMP), sponsored by the U.S. Department of Energy (DOE), was a partnered effort to develop open-source MHK point designs as reference models (RMs) to benchmark MHK technology performance and costs, and an open-source methodology for design and analysis of MHK technologies, including models for estimating their capital costs, operational costs, and levelized costs of energy. The point designs also served as open-source test articles for university researchers and commercial technology developers. The RMP project team, led by Sandia National Laboratories (SNL), included a partnership between DOE, three national laboratories, including the National Renewable Energy Laboratory (NREL), Pacific Northwest National Laboratory (PNNL), and Oak Ridge National Laboratory (ORNL), the Applied Research Laboratory of Penn State University, and Re Vision Consulting.

Reference Model 4 (RM4) is a flying-wing ocean current turbine concept intended for deployment in the Gulf Stream off the southeast coast of Florida. The RM4 device has four rotors, with a rotorless center nacelle housing the power electronics, attached on a straight wing 120 m long. The device is designed to be submerged ~50 m below the surface and is moored to the seabed. The RM4 uses buoyancy within the wing and the five nacelles to maintain its position in the water column. Each rotor has a diameter of 33 m and has a 1-MW power rating, yielding a total device rated power of 4 MW. The rotors on the left and right side of the wing rotate in opposite directions in order to balance the torque applied to the device. The rotorless center nacelle housing the power electronics serves to condition the power generated by the rotors before it is delivered to the grid.

Citation Formats

TY - DATA AB - Contains the Reference Model 4 (RM4) spreadsheets with the cost breakdown structure (CBS) for the levelized cost of energy (LCOE) calculations for a single RM4 device and multiple unit arrays. These spreadsheets are contained within an XLSX file and a spreadsheet editor such as Microsoft Excel is needed to open the file. This data was generated upon completion of the project on September 30, 2014. The Reference Model Project (RMP), sponsored by the U.S. Department of Energy (DOE), was a partnered effort to develop open-source MHK point designs as reference models (RMs) to benchmark MHK technology performance and costs, and an open-source methodology for design and analysis of MHK technologies, including models for estimating their capital costs, operational costs, and levelized costs of energy. The point designs also served as open-source test articles for university researchers and commercial technology developers. The RMP project team, led by Sandia National Laboratories (SNL), included a partnership between DOE, three national laboratories, including the National Renewable Energy Laboratory (NREL), Pacific Northwest National Laboratory (PNNL), and Oak Ridge National Laboratory (ORNL), the Applied Research Laboratory of Penn State University, and Re Vision Consulting. Reference Model 4 (RM4) is a flying-wing ocean current turbine concept intended for deployment in the Gulf Stream off the southeast coast of Florida. The RM4 device has four rotors, with a rotorless center nacelle housing the power electronics, attached on a straight wing 120 m long. The device is designed to be submerged ~50 m below the surface and is moored to the seabed. The RM4 uses buoyancy within the wing and the five nacelles to maintain its position in the water column. Each rotor has a diameter of 33 m and has a 1-MW power rating, yielding a total device rated power of 4 MW. The rotors on the left and right side of the wing rotate in opposite directions in order to balance the torque applied to the device. The rotorless center nacelle housing the power electronics serves to condition the power generated by the rotors before it is delivered to the grid. AU - Neary, Vincent A2 - Previsic, Mirko A3 - Jenne, Scott A4 - Hallett, Kathleen DB - Open Energy Data Initiative (OEDI) DP - Open EI | National Renewable Energy Laboratory DO - 10.15473/1819893 KW - MHK KW - Marine KW - Hydrokinetic KW - energy KW - power KW - ocean current KW - ocean current turbine KW - Reference Model KW - RM4 KW - LCOE KW - current energy KW - CEC KW - flying-wing current turbine KW - Reference Model Project KW - Reference Model 4 KW - cost breakdown structure KW - CBS KW - axial flow turbine LA - English DA - 2014/09/30 PY - 2014 PB - Sandia National Laboratories T1 - Reference Model 4 Cost Breakdown (RM4: Ocean Current Turbine) UR - https://doi.org/10.15473/1819893 ER -
Export Citation to RIS
Neary, Vincent, et al. Reference Model 4 Cost Breakdown (RM4: Ocean Current Turbine). Sandia National Laboratories, 30 September, 2014, MHKDR. https://doi.org/10.15473/1819893.
Neary, V., Previsic, M., Jenne, S., & Hallett, K. (2014). Reference Model 4 Cost Breakdown (RM4: Ocean Current Turbine). [Data set]. MHKDR. Sandia National Laboratories. https://doi.org/10.15473/1819893
Neary, Vincent, Mirko Previsic, Scott Jenne, and Kathleen Hallett. Reference Model 4 Cost Breakdown (RM4: Ocean Current Turbine). Sandia National Laboratories, September, 30, 2014. Distributed by MHKDR. https://doi.org/10.15473/1819893
@misc{OEDI_Dataset_8004, title = {Reference Model 4 Cost Breakdown (RM4: Ocean Current Turbine)}, author = {Neary, Vincent and Previsic, Mirko and Jenne, Scott and Hallett, Kathleen}, abstractNote = {Contains the Reference Model 4 (RM4) spreadsheets with the cost breakdown structure (CBS) for the levelized cost of energy (LCOE) calculations for a single RM4 device and multiple unit arrays. These spreadsheets are contained within an XLSX file and a spreadsheet editor such as Microsoft Excel is needed to open the file. This data was generated upon completion of the project on September 30, 2014.

The Reference Model Project (RMP), sponsored by the U.S. Department of Energy (DOE), was a partnered effort to develop open-source MHK point designs as reference models (RMs) to benchmark MHK technology performance and costs, and an open-source methodology for design and analysis of MHK technologies, including models for estimating their capital costs, operational costs, and levelized costs of energy. The point designs also served as open-source test articles for university researchers and commercial technology developers. The RMP project team, led by Sandia National Laboratories (SNL), included a partnership between DOE, three national laboratories, including the National Renewable Energy Laboratory (NREL), Pacific Northwest National Laboratory (PNNL), and Oak Ridge National Laboratory (ORNL), the Applied Research Laboratory of Penn State University, and Re Vision Consulting.

Reference Model 4 (RM4) is a flying-wing ocean current turbine concept intended for deployment in the Gulf Stream off the southeast coast of Florida. The RM4 device has four rotors, with a rotorless center nacelle housing the power electronics, attached on a straight wing 120 m long. The device is designed to be submerged ~50 m below the surface and is moored to the seabed. The RM4 uses buoyancy within the wing and the five nacelles to maintain its position in the water column. Each rotor has a diameter of 33 m and has a 1-MW power rating, yielding a total device rated power of 4 MW. The rotors on the left and right side of the wing rotate in opposite directions in order to balance the torque applied to the device. The rotorless center nacelle housing the power electronics serves to condition the power generated by the rotors before it is delivered to the grid.}, url = {https://mhkdr.openei.org/submissions/371}, year = {2014}, howpublished = {MHKDR, Sandia National Laboratories, https://doi.org/10.15473/1819893}, note = {Accessed: 2025-05-03}, doi = {10.15473/1819893} }
https://dx.doi.org/10.15473/1819893

Details

Data from Sep 30, 2014

Last updated Sep 16, 2021

Submitted Sep 8, 2021

Organization

Sandia National Laboratories

Contact

Vincent Neary

Authors

Vincent Neary

Sandia National Laboratories

Mirko Previsic

Revision Consulting

Scott Jenne

National Renewable Energy Laboratory

Kathleen Hallett

National Renewable Energy Laboratory

DOE Project Details

Project Name Reference Model Project

Project Lead Jeff Rieks

Project Number FY13 AOP 1.2.5.1

Share

Submission Downloads