"Womp Womp! Your browser does not support canvas :'("

3D Model of the McGinness Hills Geothermal Area

Publicly accessible License 

The McGinness Hills geothermal system lies in a ~8.5 km wide, north-northeast trending accommodation zone defined by east-dipping normal faults bounding the Toiyabe Range to the west and west-dipping normal faults bounding the Simpson Park Mountains to the east. Within this broad accommodation zone lies a fault step-over defined by north-northeast striking, west-dipping normal faults which step to the left at roughly the latitude of the McGinness Hills geothermal system. The McGinness Hills 3D model consists of 9 geologic units and 41 faults. The basal geologic units are metasediments of the Ordovician Valmy and Vininni Formations (undifferentiated in the model) which are intruded by Jurassic granitic rocks. Unconformably overlying is a ~100s m-thick section of Tertiary andesitic lava flows and four Oligocene-to-Miocene ash-flow tuffs: The Rattlesnake Canyon Tuff, tuff of Sutcliffe, the Cambell Creek Tuff and the Nine Hill tuff. Overlying are sequences of pre-to-syn-extensional Quaternary alluvium and post-extensional Quaternary alluvium. 10-15 degrees eastward dip of the Tertiary stratigraphy is controlled by the predominant west-dipping fault set. Geothermal production comes from two west dipping normal faults in the northern limb of the step over. Injection is into west dipping faults in the southern limb of the step over. Production and injection sites are in hydrologic communication, but at a deep level, as the northwest striking fault that links the southern and northern limbs of the step-over has no permeability.

Citation Formats

TY - DATA AB - The McGinness Hills geothermal system lies in a ~8.5 km wide, north-northeast trending accommodation zone defined by east-dipping normal faults bounding the Toiyabe Range to the west and west-dipping normal faults bounding the Simpson Park Mountains to the east. Within this broad accommodation zone lies a fault step-over defined by north-northeast striking, west-dipping normal faults which step to the left at roughly the latitude of the McGinness Hills geothermal system. The McGinness Hills 3D model consists of 9 geologic units and 41 faults. The basal geologic units are metasediments of the Ordovician Valmy and Vininni Formations (undifferentiated in the model) which are intruded by Jurassic granitic rocks. Unconformably overlying is a ~100s m-thick section of Tertiary andesitic lava flows and four Oligocene-to-Miocene ash-flow tuffs: The Rattlesnake Canyon Tuff, tuff of Sutcliffe, the Cambell Creek Tuff and the Nine Hill tuff. Overlying are sequences of pre-to-syn-extensional Quaternary alluvium and post-extensional Quaternary alluvium. 10-15 degrees eastward dip of the Tertiary stratigraphy is controlled by the predominant west-dipping fault set. Geothermal production comes from two west dipping normal faults in the northern limb of the step over. Injection is into west dipping faults in the southern limb of the step over. Production and injection sites are in hydrologic communication, but at a deep level, as the northwest striking fault that links the southern and northern limbs of the step-over has no permeability. AU - E. Faulds, James DB - Open Energy Data Initiative (OEDI) DP - Open EI | National Renewable Energy Laboratory DO - 10.15121/1136727 KW - geothermal KW - 3D Model KW - McGinness Hills KW - McGinness Hills Geothermal Area KW - faulting KW - tuff KW - stratigraphy KW - stratigraphic units KW - faults KW - cross-section KW - cross section KW - geology KW - geologic units KW - geologic contact KW - data KW - geospatial data LA - English DA - 2013/12/31 PY - 2013 PB - University of Nevada T1 - 3D Model of the McGinness Hills Geothermal Area UR - https://doi.org/10.15121/1136727 ER -
Export Citation to RIS
E. Faulds, James. 3D Model of the McGinness Hills Geothermal Area. University of Nevada, 31 December, 2013, GDR. https://doi.org/10.15121/1136727.
E. Faulds, J. (2013). 3D Model of the McGinness Hills Geothermal Area. [Data set]. GDR. University of Nevada. https://doi.org/10.15121/1136727
E. Faulds, James. 3D Model of the McGinness Hills Geothermal Area. University of Nevada, December, 31, 2013. Distributed by GDR. https://doi.org/10.15121/1136727
@misc{OEDI_Dataset_6700, title = {3D Model of the McGinness Hills Geothermal Area}, author = {E. Faulds, James}, abstractNote = {The McGinness Hills geothermal system lies in a ~8.5 km wide, north-northeast trending accommodation zone defined by east-dipping normal faults bounding the Toiyabe Range to the west and west-dipping normal faults bounding the Simpson Park Mountains to the east. Within this broad accommodation zone lies a fault step-over defined by north-northeast striking, west-dipping normal faults which step to the left at roughly the latitude of the McGinness Hills geothermal system. The McGinness Hills 3D model consists of 9 geologic units and 41 faults. The basal geologic units are metasediments of the Ordovician Valmy and Vininni Formations (undifferentiated in the model) which are intruded by Jurassic granitic rocks. Unconformably overlying is a ~100s m-thick section of Tertiary andesitic lava flows and four Oligocene-to-Miocene ash-flow tuffs: The Rattlesnake Canyon Tuff, tuff of Sutcliffe, the Cambell Creek Tuff and the Nine Hill tuff. Overlying are sequences of pre-to-syn-extensional Quaternary alluvium and post-extensional Quaternary alluvium. 10-15 degrees eastward dip of the Tertiary stratigraphy is controlled by the predominant west-dipping fault set. Geothermal production comes from two west dipping normal faults in the northern limb of the step over. Injection is into west dipping faults in the southern limb of the step over. Production and injection sites are in hydrologic communication, but at a deep level, as the northwest striking fault that links the southern and northern limbs of the step-over has no permeability.
}, url = {https://gdr.openei.org/submissions/363}, year = {2013}, howpublished = {GDR, University of Nevada, https://doi.org/10.15121/1136727}, note = {Accessed: 2025-05-03}, doi = {10.15121/1136727} }
https://dx.doi.org/10.15121/1136727

Details

Data from Dec 31, 2013

Last updated Aug 27, 2021

Submitted Mar 21, 2014

Organization

University of Nevada

Contact

James E. Faulds

775.682.8751

Authors

James E. Faulds

University of Nevada

Research Areas

DOE Project Details

Project Name Recovery Act: Characterizing Structural Controls of EGS-Candidate and Conventional Geothermal Reservoirs in the Great Basin: Developing Successful Exploration Strategies in Extended Terranes

Project Lead Mark Ziegenbein

Project Number EE0002748

Share

Submission Downloads