Utah FORGE 3-2535: Report on Borehole EM Data Collection and Imaging with the VEMP Field System
This report outlines electromagnetic field measurements that were made after stimulation at Utah FORGE in May of 2024. The measurements involved lowering an electrode to ~3500' in well 16A to energize the steel casing as part of the electric source, with the return electrode located on the surface approximately 1km to the west. Three component magnetic field measurements were made with the VEMP tool in well 78-32B starting at just below the casing shoe in the open hole and moving upward at 100m increments. Due to noise in the system and other problems, only vertical field measurements were completed over the whole interval.
Citation Formats
Lawrence Berkeley National Laboratory. (2024). Utah FORGE 3-2535: Report on Borehole EM Data Collection and Imaging with the VEMP Field System [data set]. Retrieved from https://gdr.openei.org/submissions/1643.
Alumbaugh, David, Wilt, Michael, and NIchols, Edward. Utah FORGE 3-2535: Report on Borehole EM Data Collection and Imaging with the VEMP Field System. United States: N.p., 05 Sep, 2024. Web. https://gdr.openei.org/submissions/1643.
Alumbaugh, David, Wilt, Michael, & NIchols, Edward. Utah FORGE 3-2535: Report on Borehole EM Data Collection and Imaging with the VEMP Field System. United States. https://gdr.openei.org/submissions/1643
Alumbaugh, David, Wilt, Michael, and NIchols, Edward. 2024. "Utah FORGE 3-2535: Report on Borehole EM Data Collection and Imaging with the VEMP Field System". United States. https://gdr.openei.org/submissions/1643.
@div{oedi_6178, title = {Utah FORGE 3-2535: Report on Borehole EM Data Collection and Imaging with the VEMP Field System}, author = {Alumbaugh, David, Wilt, Michael, and NIchols, Edward.}, abstractNote = {This report outlines electromagnetic field measurements that were made after stimulation at Utah FORGE in May of 2024. The measurements involved lowering an electrode to ~3500' in well 16A to energize the steel casing as part of the electric source, with the return electrode located on the surface approximately 1km to the west. Three component magnetic field measurements were made with the VEMP tool in well 78-32B starting at just below the casing shoe in the open hole and moving upward at 100m increments. Due to noise in the system and other problems, only vertical field measurements were completed over the whole interval.}, doi = {}, url = {https://gdr.openei.org/submissions/1643}, journal = {}, number = , volume = , place = {United States}, year = {2024}, month = {09}}
Details
Data from Sep 5, 2024
Last updated Sep 10, 2024
Submitted Sep 5, 2024
Organization
Lawrence Berkeley National Laboratory
Contact
David Alumbaugh
510.717.7179
Authors
Original Source
https://gdr.openei.org/submissions/1643Research Areas
Keywords
geothermal, energy, Electromagnetic, Resistivity, Utah FORGE, EGS, 16A, EM, VEMP, geophysics, borehole logging, cross-borehole, magnetic induction, three component, stimulation, report, data collection, data processingDOE Project Details
Project Name Utah FORGE
Project Lead Lauren Boyd
Project Number EE0007080
