for 15-minute intervals. The dataset contains results and metadata that should fully cover all software settings and options used in data processing. **Data Quality** Beyond the Quality Control (QC) procedures implemented in EddyPro, nothing additional is included." /> for 15-minute intervals. The dataset contains results and metadata that should fully cover all software settings and options used in data processing. **Data Quality** Beyond the Quality Control (QC) procedures implemented in EddyPro, nothing additional is included.." /> for 15-minute intervals. The dataset contains results and metadata that should fully cover all software settings and options used in data processing. **Data Quality** Beyond the Quality Control (QC) procedures implemented in EddyPro, nothing additional is included." />
"Womp Womp! Your browser does not support canvas :'("

Surface Meteorological Station - PNNL 10m Sonic, Physics site-5 - Derived Data

Publicly accessible License 

**Overview**

This set provides estimation of the turbulent fluxes obtained with EddyPro v6.2.0 software (15-min averaging).

**Data Details**

Each meteorological station had one sonic anemometer (Gill R3-50, omnidirectional) mounted on top of a 10-m tower. Sensor verticality (within a degree) was verified by the analog inclinometer mounted on the base plate alongside the sonic anemometer. NOTE: the sonic anemometer has been oriented to the magnetic North. The serial data stream was transmitted via radio link (9XTend RF modem by MaxStream) to the data acquisition computer housed in a temperature-controlled enclosure at the base of the 80-m tower.

The original data were stored in flat ASCII files in 30-min pieces (".00." level). The raw data were preprocessed to conform with EddyPro software. All evidently erroneous and/or broken lines were marked as bad. All erroneous or missed data were replaced with "baddata" place holder (99.99), the housekeeping data were stripped off, and the data were split into 5-min portions with no internal time stamp. The preprocessed data are available from the archive as ?.a0? level data.

The current dataset is the result of processing the preprocessed data (?.a0?) with EddyPro v6.2.0 for 15-minute intervals. The dataset contains results and metadata that should fully cover all software settings and options used in data processing.

**Data Quality**

Beyond the Quality Control (QC) procedures implemented in EddyPro, nothing additional is included.

Citation Formats

Wind Energy Technologies Office (WETO). (2016). Surface Meteorological Station - PNNL 10m Sonic, Physics site-5 - Derived Data [data set]. Retrieved from https://dx.doi.org/10.21947/1402024.
Export Citation to RIS
Pekour, Mikhail, Berg, Larry. Surface Meteorological Station - PNNL 10m Sonic, Physics site-5 - Derived Data. United States: N.p., 02 Apr, 2016. Web. doi: 10.21947/1402024.
Pekour, Mikhail, Berg, Larry. Surface Meteorological Station - PNNL 10m Sonic, Physics site-5 - Derived Data. United States. https://dx.doi.org/10.21947/1402024
Pekour, Mikhail, Berg, Larry. 2016. "Surface Meteorological Station - PNNL 10m Sonic, Physics site-5 - Derived Data". United States. https://dx.doi.org/10.21947/1402024. https://a2e.energy.gov/data/wfip2/met.z11.c0.
@div{oedi_4403, title = {Surface Meteorological Station - PNNL 10m Sonic, Physics site-5 - Derived Data}, author = {Pekour, Mikhail, Berg, Larry.}, abstractNote = {**Overview**

This set provides estimation of the turbulent fluxes obtained with EddyPro v6.2.0 software (15-min averaging).

**Data Details**

Each meteorological station had one sonic anemometer (Gill R3-50, omnidirectional) mounted on top of a 10-m tower. Sensor verticality (within a degree) was verified by the analog inclinometer mounted on the base plate alongside the sonic anemometer. NOTE: the sonic anemometer has been oriented to the magnetic North. The serial data stream was transmitted via radio link (9XTend RF modem by MaxStream) to the data acquisition computer housed in a temperature-controlled enclosure at the base of the 80-m tower.

The original data were stored in flat ASCII files in 30-min pieces (".00." level). The raw data were preprocessed to conform with EddyPro software. All evidently erroneous and/or broken lines were marked as bad. All erroneous or missed data were replaced with "baddata" place holder (99.99), the housekeeping data were stripped off, and the data were split into 5-min portions with no internal time stamp. The preprocessed data are available from the archive as ?.a0? level data.

The current dataset is the result of processing the preprocessed data (?.a0?) with EddyPro v6.2.0 for 15-minute intervals. The dataset contains results and metadata that should fully cover all software settings and options used in data processing.

**Data Quality**

Beyond the Quality Control (QC) procedures implemented in EddyPro, nothing additional is included.}, doi = {10.21947/1402024}, url = {https://a2e.energy.gov/data/wfip2/met.z11.c0}, journal = {}, number = , volume = , place = {United States}, year = {2016}, month = {04}}
https://dx.doi.org/10.21947/1402024

Details

Data from Apr 2, 2016

Last updated Oct 11, 2021

Submitted Sep 28, 2017

Organization

Wind Energy Technologies Office (WETO)

Contact

Mikhail Pekour

509.375.2470

Authors

Mikhail Pekour

Pacific Northwest National Laboratory

Larry Berg

Pacific Northwest National Laboratory

Research Areas

DOE Project Details

Project Name Wind Data Hub

Project Number 67025

Share

Submission Downloads