"Womp Womp! Your browser does not support canvas :'("

UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence B - Raw Data

Publicly accessible License 

**Overview**

Sequences B, C, and D: Downwind Baseline (F), Downwind Low Pitch (F),
Downwind High Pitch (F)

This test sequence used a downwind, teetered turbine with a 3.4° cone angle. The wind speed
ranged from 5 m/s to 25 m/s. Yaw angles of ±180° were achieved at low wind speeds, and yaw
angles of -20° to 10° were achieved for high wind speeds. The blade tip pitch was 3° for sequence
B, 0° for sequence C, and 6° for sequence D. These three sequences were interleaved during
testing because the pitch angle change was easily made by the turbine operator. The rotor rotated
at 72 RPM. Blade and probe pressure measurements were collected.

**Data Details**

File naming information can be found in the attached Word document "Sequence B Filename Key", copied from the Phase VI Test Report.

Citation Formats

Wind Energy Technologies Office (WETO). (2018). UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence B - Raw Data [data set]. Retrieved from https://dx.doi.org/10.21947/1482203.
Export Citation to RIS
Fingersh, Lee. UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence B - Raw Data. United States: N.p., 15 Nov, 2018. Web. doi: 10.21947/1482203.
Fingersh, Lee. UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence B - Raw Data. United States. https://dx.doi.org/10.21947/1482203
Fingersh, Lee. 2018. "UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence B - Raw Data". United States. https://dx.doi.org/10.21947/1482203. https://a2e.energy.gov/data/uae6/uae6.z01.00.
@div{oedi_4197, title = {UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence B - Raw Data}, author = {Fingersh, Lee.}, abstractNote = {**Overview**

Sequences B, C, and D: Downwind Baseline (F), Downwind Low Pitch (F),
Downwind High Pitch (F)

This test sequence used a downwind, teetered turbine with a 3.4° cone angle. The wind speed
ranged from 5 m/s to 25 m/s. Yaw angles of ±180° were achieved at low wind speeds, and yaw
angles of -20° to 10° were achieved for high wind speeds. The blade tip pitch was 3° for sequence
B, 0° for sequence C, and 6° for sequence D. These three sequences were interleaved during
testing because the pitch angle change was easily made by the turbine operator. The rotor rotated
at 72 RPM. Blade and probe pressure measurements were collected.

**Data Details**

File naming information can be found in the attached Word document "Sequence B Filename Key", copied from the Phase VI Test Report.}, doi = {10.21947/1482203}, url = {https://a2e.energy.gov/data/uae6/uae6.z01.00}, journal = {}, number = , volume = , place = {United States}, year = {2018}, month = {11}}
https://dx.doi.org/10.21947/1482203

Details

Data from Nov 15, 2018

Last updated Mar 27, 2020

Submitted Nov 15, 2018

Organization

Wind Energy Technologies Office (WETO)

Contact

Lee Fingersh

303.384.6929

Authors

Lee Fingersh

NREL

Research Areas

DOE Project Details

Project Name Wind Data Hub

Project Number 67025

Share

Submission Downloads