"Womp Womp! Your browser does not support canvas :'("

UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence 3 - Raw Data

Publicly accessible License 

**Overview**

Sequence 3: Tower Wake Measure (P)

Sequence 3 used a downwind, rigid turbine with a 3.4° cone angle. The wind speeds for this
sequence corresponded to subcritical [7 m/s], transitional [15 m/s], and supercritical [20 m/s]
Reynolds number regimes for the circular cross-section tower. The yaw angle and blade tip pitch
angles were selected to traverse the probe tip across the tower wake, while keeping the probe axis
approximately parallel to the tunnel centerline. The rotor was parked with the instrumented blade
at 180° azimuth. Blade and probe pressure measurements were collected.

**Data Details**

File naming information can be found in the attached Word document "Sequence 3 Filename Key", copied from the Phase VI Test Report.

Citation Formats

Wind Energy Technologies Office (WETO). (2018). UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence 3 - Raw Data [data set]. Retrieved from https://dx.doi.org/10.21947/1483767.
Export Citation to RIS
Fingersh, Lee. UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence 3 - Raw Data. United States: N.p., 29 Nov, 2018. Web. doi: 10.21947/1483767.
Fingersh, Lee. UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence 3 - Raw Data. United States. https://dx.doi.org/10.21947/1483767
Fingersh, Lee. 2018. "UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence 3 - Raw Data". United States. https://dx.doi.org/10.21947/1483767. https://a2e.energy.gov/data/uae6/uae6.z24.00.
@div{oedi_4190, title = {UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence 3 - Raw Data}, author = {Fingersh, Lee.}, abstractNote = {**Overview**

Sequence 3: Tower Wake Measure (P)

Sequence 3 used a downwind, rigid turbine with a 3.4° cone angle. The wind speeds for this
sequence corresponded to subcritical [7 m/s], transitional [15 m/s], and supercritical [20 m/s]
Reynolds number regimes for the circular cross-section tower. The yaw angle and blade tip pitch
angles were selected to traverse the probe tip across the tower wake, while keeping the probe axis
approximately parallel to the tunnel centerline. The rotor was parked with the instrumented blade
at 180° azimuth. Blade and probe pressure measurements were collected.

**Data Details**

File naming information can be found in the attached Word document "Sequence 3 Filename Key", copied from the Phase VI Test Report.}, doi = {10.21947/1483767}, url = {https://a2e.energy.gov/data/uae6/uae6.z24.00}, journal = {}, number = , volume = , place = {United States}, year = {2018}, month = {11}}
https://dx.doi.org/10.21947/1483767

Details

Data from Nov 29, 2018

Last updated Mar 27, 2020

Submitted Nov 29, 2018

Organization

Wind Energy Technologies Office (WETO)

Contact

Lee Fingersh

303.384.6929

Authors

Lee Fingersh

NREL

Research Areas

DOE Project Details

Project Name Wind Data Hub

Project Number 67025

Share

Submission Downloads