"Womp Womp! Your browser does not support canvas :'("

Utah FORGE: TEM and Gravity Data

Publicly accessible License 

This submission includes a gravity data in text format and as a GIS point shapefile and transient electromagnetic (TEM) raw data. Each text file additionally contains location data (UTM Zone 12, NAD83) and elevation (meters) data for that station.

The gravity data shapefile was in part downloaded from PACES, University of Texas at El Paso, http://gis.utep.edu/subpages/GMData.html, and in part collected by the Utah Geological Survey (UGS) as part of the DOE GTO supported Utah FORGE geothermal energy project near Milford, Utah. The PACES data were examined and scrubbed to eliminate any questionable data. A 2.67 g/cm^3 reduction density was used for the Bouguer correction.

The attribute table column headers for the gravity data shapefile are explained below. There is also metadata attached to the GIS shapefile.

name: the individual gravity station name.
HAE: height above ellipsoid [meter]
NGVD29: vertical datum for geoid [meter]
obs: observed gravity
ERRG: gravity measurement error [mGal]
IZTC: inner zone terrain correction [mGal]
OZTC: outer zone terrain correction [mGal]
Gfa: free air gravity
gSBGA: Bouguer horizontal slab
sCBGA: Complete Bouguer anomaly

Citation Formats

Energy and Geoscience Institute at the University of Utah. (2018). Utah FORGE: TEM and Gravity Data [data set]. Retrieved from https://dx.doi.org/10.15121/1452733.
Export Citation to RIS
Hardwick, Christian, Nash, Greg. Utah FORGE: TEM and Gravity Data . United States: N.p., 05 Feb, 2018. Web. doi: 10.15121/1452733.
Hardwick, Christian, Nash, Greg. Utah FORGE: TEM and Gravity Data . United States. https://dx.doi.org/10.15121/1452733
Hardwick, Christian, Nash, Greg. 2018. "Utah FORGE: TEM and Gravity Data ". United States. https://dx.doi.org/10.15121/1452733. https://gdr.openei.org/submissions/1002.
@div{oedi_3671, title = {Utah FORGE: TEM and Gravity Data }, author = {Hardwick, Christian, Nash, Greg.}, abstractNote = {This submission includes a gravity data in text format and as a GIS point shapefile and transient electromagnetic (TEM) raw data. Each text file additionally contains location data (UTM Zone 12, NAD83) and elevation (meters) data for that station.

The gravity data shapefile was in part downloaded from PACES, University of Texas at El Paso, http://gis.utep.edu/subpages/GMData.html, and in part collected by the Utah Geological Survey (UGS) as part of the DOE GTO supported Utah FORGE geothermal energy project near Milford, Utah. The PACES data were examined and scrubbed to eliminate any questionable data. A 2.67 g/cm^3 reduction density was used for the Bouguer correction.

The attribute table column headers for the gravity data shapefile are explained below. There is also metadata attached to the GIS shapefile.

name: the individual gravity station name.
HAE: height above ellipsoid [meter]
NGVD29: vertical datum for geoid [meter]
obs: observed gravity
ERRG: gravity measurement error [mGal]
IZTC: inner zone terrain correction [mGal]
OZTC: outer zone terrain correction [mGal]
Gfa: free air gravity
gSBGA: Bouguer horizontal slab
sCBGA: Complete Bouguer anomaly}, doi = {10.15121/1452733}, url = {https://gdr.openei.org/submissions/1002}, journal = {}, number = , volume = , place = {United States}, year = {2018}, month = {02}}
https://dx.doi.org/10.15121/1452733

Details

Data from Feb 5, 2018

Last updated Mar 12, 2020

Submitted Feb 5, 2018

Organization

Energy and Geoscience Institute at the University of Utah

Contact

Greg Nash

801.585.9986

Authors

Christian Hardwick

Utah Geological Survey

Greg Nash

Energy Geoscience Institute at the University of Utah

Research Areas

DOE Project Details

Project Name Utah FORGE

Project Lead Lauren Boyd

Project Number EE0007080

Share

Submission Downloads