Search OEDI Data

Showing results 1 - 25 of 758.
Show results per page.
Order by:
Available Now:
Research Areas
Accessibility
Data Type
Organization
Source
"Utah EGS"×

Utah FORGE: 2020-2021 Geothermal Energy/EGS Survey and Results

The Utah FORGE project collaborated with the University of Utahs Department of Communication on a Capstone course during Fall Semester 2020. The course created a survey to gauge the general populations knowledge of geothermal energy and Enhanced Geothermal Systems (EGS). The surve...
Yeo, S. and McKasy, M. Energy and Geoscience Institute at the University of Utah
Jul 20, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2446: Closing the Loop Between In-Situ Stress Complexity and EGS Fracture Complexity 2024 Annual Workshop Presentation

This is a presentation on Closing the Loop Between In-Situ Stress Complexity and EGS Fracture Complexity by Lawrence Livermore National Laboratory, presented by Matteo Cusini. The video discusses the combination of high-fidelity simulations and true-triaxial block fracturing tests...
Cusini, M. et al Energy and Geoscience Institute at the University of Utah
Aug 26, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Leapfrog 3D Geologic Movie

This is a 3D geological movie of the Utah FORGE area created with Leapfrog Geothermal 3D modelling software. The movie shows the Utah FORGE site, wells, seismic and lithologic cross-sections, and rock unit tops. This illustrates the thick crystalline granitoid EGS reservoir.
Podgorney, R. Energy and Geoscience Institute at the University of Utah
May 18, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Joint Imaging of Fracture Growth and Estimation of Fracture Properties During EGS Development 2024 Annual Workshop Presentation

This is a presentation on the Joint Electromagnetic/Seismic/InSAR Imaging of Spatial-Temporal Fracture Growth and Estimation of Physical Fracture Properties During EGS Resource Development by Lawrence Berkeley National Laboratory, presented by David Alumbaugh. This is a video pres...
Alumbaugh, D. Energy and Geoscience Institute at the University of Utah
Aug 25, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: GeoThermOPTIMAL Presentation Video

This is a project description video by Dr. William W. Fleckenstein related to their "Development of Multi-Stage Fracturing System and Wellbore Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores" R&D project at Utah FORGE which is linked...
Fleckenstein, W. Colorado School of Mines
Dec 12, 2022
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3A Year 1 Annual Report for 2020

This is the Utah FORGE annual report for Phase 3A year 1, which was completed on December 28th, 2020. This report includes site infrastructure, site operations, seismic monitoring, a conceptual geological model, outreach, and communications for the Utah FORGE project during Phase ...
Moore, J. et al Energy and Geoscience Institute at the University of Utah
Dec 28, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE 9-3635: Testing of Proppants for EGS and Simulation of EM Fracture Mapping Using Electrically-Conductive Proppants 2025 Workshop Presentation

This is a presentation on High-Temperature Testing of Proppants for EGS and Simulation of Electromagnetic Fracture Mapping Using Electrically-Conductive Proppants by Stevens Institute of Technology, presented by Dr. Cheng Chen. This video slide presentation describes laboratory te...
Chen, C. Stevens Institute of Technology
Sep 18, 2025
3 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Fiber-Optic Geophysical Monitoring of Reservoir Evolution 2023 Annual Workshop Presentation

This is a presentation on the Fiber-Optic Geophysical Monitoring of Reservoir Evolution at the Utah FORGE Milford Site project by Rice University, presented by Prof. Jonathan Ajo-Franklin. The project's objective was to develop an end-to-end fiber-optic sensing approach for EGS to...
Ajo-Franklin, J. et al Rice University
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2446: Closing the Loop Between In-situ Stress Complexity and EGS Fracture Complexity 2025 Workshop Presentation

This is a presentation on the Closing the Loop Between In-situ Stress Complexity and EGS Fracture Complexity project by Lawrence Livermore National Laboratory, presented by Dr. Fan (Frank) Fei. The project's objective was to employ a combination of high-fidelity simulations and tr...
Kroll, K. and Fei, F. Lawrence Livermore National Laboratory
Sep 18, 2025
3 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439v2: A Multi-Component Approach to Characterizing In-Situ Stress 2025 Workshop Presentation

This is a presentation on A Multi-Component Approach to Characterizing In-Situ Stress at the U.S DOE FORGE EGS Site: Laboratory, Modeling and Field Measurement project by University of Pittsburgh, presented by Dr. Andrew Bunger. The project's objective was to characterize stress i...
Bunger, A. University of Pittsburgh
Sep 18, 2025
3 Resources
0 Stars
Publicly accessible

Utah FORGE 9-3664: Development of Tagged Proppant for Conductivity Enhancement and Reservoir Characterization 2024 Annual Workshop Presentation

This is a presentation on the Development and Testing of Tagged Proppant for Fracture Conductivity Enhancement and Reservoir Characterization in EGS by The University of Oklahoma, presented by Ahmad Ghassemi. This slide presentation video discusses the development and testing of n...
Ghassemi, A. et al Energy and Geoscience Institute at the University of Utah
Sep 03, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2419: Temperature Testing of Proppants for EGS and Stimulation of Electromagnetic Fracture Mapping Using Electrically-Conducive Proppants 2024 Annual Workshop Presentation

This is a presentation on the Temperature Testing of Proppants for EGS and Stimulation of Electromagnetic Fracture Mapping Using Electrically-Conducive Proppants by Stevens Institute of Technology, presented by Cheng Chen. This video slide presentation discusses well controlled la...
Chen, C. et al Energy and Geoscience Institute at the University of Utah
Sep 14, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Seismic Risk Trafic Light System Version 2

The report outlines the updated Traffic Light System (TLS) for the Utah FORGE project, which aims to mitigate seismic risks associated with Enhanced Geothermal Systems (EGS) operations. It integrates lessons from past operations, including stimulation and circulation experiments a...
Pankow, K. et al University of Utah Seismograph Stations
Jan 24, 2025
1 Resources
0 Stars
Publicly accessible

Utah FORGE 8-3617: Tracer Huff-Puff Tests and Geomechanical Analysis to Measure Evolution of the Fracture Network 2025 Workshop Presentation

This is a presentation on Integrating Tracer Huff-Puff Tests and Geomechanical Analysis to Measure Evolution of the Fracture Network in EGS Reservoirs by California State University Long Beach, presented by Prof. Matthew Becker. This video slide presentation describes the use of h...
Becker, M. California State University Long Beach
Sep 18, 2025
3 Resources
0 Stars
Publicly accessible

Utah FORGE: 2022 Seismic Workshop Report

Utah FORGE held a two-day seismic workshop on the University of Utah campus in Salt Lake City, Utah on September 26 and 27, 2022 to share what was learned from the seismic monitoring during the 2022 stimulation. This is a report documenting this workshop. The meeting was structure...
Pankow, K. University of Utah Seismograph Stations
Dec 19, 2022
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Final Report on Joint Electromagnetic, Seismic, and InSAR Imaging of Fracture Growth During EGS Resource Development

This dataset contains the final technical report for the project Joint Electromagnetic/Seismic/InSAR Imaging of Spatial-Temporal Fracture Growth and Estimation of Physical Fracture Properties During EGS Resource Development, carried out from 2021 to 2025 by Lawrence Berkeley Natio...
Alumbaugh, D. Lawrence Berkeley National Laboratory
May 30, 2025
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439: A Multi-Component Approach to Characterizing In-Situ Stress: Laboratory, Modeling and Field Measurement 2023 Annual Workshop Presentation

This is a presentation on A Multi-Component Approach to Characterizing In-Situ Stress at the U.S DOE FORGE EGS Site: Laboratory, Modeling and Field Measurement project by Battelle [Columbus, OH], presented by Mark Kelley. The project's objective was to characterize stress in the U...
Kelley, M. and Bunger, A. Battelle Memorial Institute
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2446: Closing the Loop Between In-situ Stress Complexity and EGS Fracture Complexity 2023 Annual Workshop Presentation

This is a presentation on the Closing the Loop Between In-situ Stress Complexity and EGS Fracture Complexity project by Lawrence Livermore National Laboratory, presented by Dr. Matteo Cusini. The project's objective was to employ a combination of high-fidelity simulations and true...
Cusini, M. and Bunger, A. Lawrence Livermore National Laboratory
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: UGS Interactive Geoscience Map

This is a link to the Utah Geological Survey's Utah FORGE Interactive Geoscience Map. The map layers include information on geology, geography, subsurface temperatures, seismicity, gravity and groundwater. Instructions for using the interactive map and a legend for the interactive...
Hill, J. Utah Geological Survey
Jan 01, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2419: Final Report and Presentation on Seismicity Permeability Relationships Probed via Nonlinear Acoustic Imaging

This submission contains the final technical report and closeout presentation for Utah FORGE Project 5-2419, which investigates the coupled evolution of permeability and induced seismicity in enhanced geothermal systems using laboratory experiments, field observations, and nonline...
Elsworth, D. Pennsylvania State University
Sep 30, 2025
2 Resources
0 Stars
Publicly accessible

Utah FORGE 1-2410: Development of a Smart Completion and Stimulation Solution 2023 Annual Workshop Presentation

This is a presentation on the Development of a Smart Completion & Stimulation Solution project by Welltec in collaboration with the University of Oklahoma, presented by Yosafat Esquitin, a Senior Business Development Manager at Welltec. The project's objective was to develop an an...
Esquitin, Y. et al Welltec
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2514: A Strain Sensing Array to Characterize Deformation at the FORGE Site 2025 Workshop Presentation

This is a presentation on the Strain Sensing Array to Characterize Deformation at the FORGE Site project by Clemson University, presented by Lawrence Murdoch. The project's objective was to evaluate the feasibility of measuring and interpreting tensor strain data to improve the pe...
Murdoch, L. Clemson University
Sep 18, 2025
3 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2428: Fracture Permeability Impact on Reservoir Stress and Seismic Slip Behavior 2025 Workshop Presentation

This is a presentation on the Fracture Permeability Impact on Seismic Slip Behavior project by Lawrence Livermore National Laboratory, presented by Dr. Kayla A. Kroll. The project's objective is to develop, apply and validate a holistic thermal, hydrologic, mechanical, and chemica...
Kroll, K. Lawrence Livermore National Laboratory
Sep 18, 2025
3 Resources
0 Stars
Publicly accessible

Utah FORGE: 2024 Annual Report on Activities and Advancements

This 2024 annual report for Phase 3B Year 2 at Utah FORGE provides an in-depth account of activities and advancements made at the site. Key achievements include drilling and stimulating the production well 16B(78)-32, creating a geothermal reservoir, and achieving commercial-scale...
McLennan, J. et al Energy and Geoscience Institute at the University of Utah
Jan 27, 2025
1 Resources
0 Stars
Publicly accessible

Utah FORGE 9-3706: Designing, Characterizing and Optimizing Proppant and Flow Monitoring Materials 2025 Workshop Presentation

This is a presentation on Designing, Characterizing & Optimizing Proppant & Flow Monitoring Materials for a Utah FORGE Engineered Geothermal System by Oklahoma State University, presented by Dr. Mileva Radonjic. This video slide presentation discusses enhanced proppant coatings, z...
Radonjic, M. Oklahoma State University
Sep 18, 2025
3 Resources
0 Stars
Publicly accessible
12345Next >>