Search OEDI Data

Exploration Case Studies on OpenEI

The goal of this project was to create a template (and associated form) on OpenEI to solicit crowd-sourced information sharing about various geothermal resource areas around the world. Over the past two years, twelve case studies have been researched by NREL staff testing the usa...

Young, K. National Renewable Energy Laboratory

Sep 27, 2013
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16B(78)-32 Pressure-Temperature Logs March April 2024

This dataset consists of Baker Hughes Pressure-Temperature gauge readings on fiber optics in Utah FORGE Well 16B(78)-32. This gauge is at a measured depth of 7,056.67 feet. The true vertical depth can be determined from the well survey data, which is linked below. The data consis...

McLennan, J. and Hughes, B. Energy and Geoscience Institute at the University of Utah

Apr 20, 2024
2 Resources
0 Stars
Publicly accessible

Identifying and Delineating Thermally Active Areas in Colorado Using Thermal Remote Sensing Data

This report outlines the approach and methodology of the utilization of thermal satellite imagery to find areas of warm ground that might indicate heat flow from a buried geothermal system. The satellite platforms, modeling equations and corrections to the data are discussed. Some...

Hussein, K. Flint Geothermal, LLC

Dec 26, 2012
1 Resources
0 Stars
Publicly accessible

Brady's Geothermal Field March 2016 Vibroseis SEG-Y Files and UTM Locations

PoroTomo March 2016 Updated vibroseis source locations with UTM locations. Supersedes gdr.openei.org/submissions/824. Updated vibroseis source location data for Stages 1-4, PoroTomo March 2016. This revision includes source point locations in UTM format (meters) for all four Stage...

Feigl, K. University of Wisconsin

Mar 31, 2016
10 Resources
0 Stars
Publicly accessible

DCIF Westerly Granite AE Stress Effect Test (Task 3-1)

Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on rectangular Westerly granite blocks (width=depth=4.0", height=2.0"). Liquid nitrogen was poured in a small, 1"-diameter copper cup attached to the top of the sample, and the resulting acoustic emissions (A...

Nakagawa, S. and Trzeciak, M. Lawrence Berkeley National Laboratory

Jul 08, 2021
15 Resources
0 Stars
Publicly accessible

Utah FORGE: Wells 16A(78)-32 and 16B(78)-32 Stimulation Program Report May 2024

This dataset consists of a comprehensive report documenting the stimulation program conducted in May 2024 on Utah FORGE wells 16A(78)-32 and 16B(78)-32. It includes detailed accounts of operational and scientific objectives, stimulation methodologies, and testing outcomes. The rep...

McClennan, J. et al Energy and Geoscience Institute at the University of Utah

Nov 19, 2024
1 Resources
0 Stars
Publicly accessible

Ground Source Heat Pump Computational Results

This data submission includes simulation results for ground loop heat pump systems located in 6 different cities across the United States. The cities are Boston, MA, Dayton, OH, Omaha, NE, Orlando, FL, Sacramento, CA, and St. Paul, MN. These results were obtained from the two-dime...

Menart, J. Wright State University

Jul 31, 2013
6 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439v2: Reports on Stress Prediction and Modeling for Well 16B(78)-32 May 2025

These two reports from the University of Pittsburgh document related efforts under Utah FORGE Project 2-2439v2 to estimate in-situ stresses in well 16B(78)-32 using laboratory data, machine learning models, and physics-based simulations. One report focuses on developing and valida...

Lu, G. et al University of Pittsburgh

Jun 05, 2025
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32: Summary of Drilling Activities

This is a 74 page detailed summary of the drilling activities of Utah FORGE 16A(78)-32, a highly deviated well completed on February 2nd, 2021, as part of the Utah FORGE project. This well was deviated at 65 degrees from vertical after reaching 6000 feet in depth had a total measu...

Winkler, D. et al Energy and Geoscience Institute at the University of Utah

Mar 20, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3A Year 1 Annual Report for 2020

This is the Utah FORGE annual report for Phase 3A year 1, which was completed on December 28th, 2020. This report includes site infrastructure, site operations, seismic monitoring, a conceptual geological model, outreach, and communications for the Utah FORGE project during Phase ...

Moore, J. et al Energy and Geoscience Institute at the University of Utah

Dec 28, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Triggered DAS and Continuous Downhole Geophone Data from April 2024 Stimulations

This dataset contains distributed acoustic sensing (DAS) and downhole geophone data collected during the April 2024 stimulation experiments at the Utah FORGE site. DAS data were acquired from well 16B(78)-32 by Neubrex and processed by GeoEnergie Suisse (GES), covering the period ...

Dyer, B. et al Energy and Geoscience Institute at the University of Utah

Apr 01, 2024
5 Resources
0 Stars
Publicly accessible

Validation of Innovative Exploration Technologies for Newberry Volcano: Drill Site Location Map

Newberry seeks to explore "blind" (no surface evidence) convective hydrothermal systems associated with a young silicic pluton on the flanks of Newberry Volcano. This project will employ a combination of innovative and conventional techniques to identify the location of subsurface...

Jaffe, T. Davenport Newberry Holdings, LLC

Jan 01, 2012
1 Resources
0 Stars
Publicly accessible

GDR Data Management and Best Practices for Submitters and Curators

Resources for GDR data submitters and curators, including training videos, step-by-step guides on data submission, and detailed documentation of the GDR. The Data Management and Submission Best Practices document also contains API access and metadata schema information for develo...

Weers, J. et al National Renewable Energy Laboratory

Mar 31, 2021
3 Resources
0 Stars
Publicly accessible

DCIF (Directional Cooling-Induced Fracturing) Westerly Granite AE Borehole Damage Effect Test (Task 3-0)

Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on three rectangular Westerly granite blocks (width=depth=4.0", height=2.0") which were preheated to 200, 400, and 600 degree C to induce damage (microcracks) with varying degrees. Liquid nitrogen was poured...

Nakagawa, S. Lawrence Berkeley National Laboratory

Jan 27, 2022
13 Resources
0 Stars
Publicly accessible

Utah FORGE: Earth Model Native State Simulation Results

Utah FORGE phase 2C Native State Simulation zip contains the data used for the boundary conditions and subsequent native state simulation results obtained using the simulation code FALCON. Data are from the nodes of the simulation domain, with used a uniform 50m spacing over a 250...

Podgorney, R. Energy and Geoscience Institute at the University of Utah

Jul 16, 2019
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Report on the Thermal Properties of Wells 16A(78)-32 & 58-32 Granite

This is a report from Metarock Laboratories on the thermal properties of Utah FORGE wells 16A(78)-32 & 58-32 granite. The report includes pictures of core samples, core details for the samples (where the sample was taken and the size of the sample), sample thermal expansion test r...

Laboratories, M. et al Energy and Geoscience Institute at the University of Utah

May 04, 2021
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: 4100 Foot Level Elastic Property Data

Static and dynamic elastic properties (Young's modulus, Shear Modulus, P-wave Modulus, and Poisson's Ratio) of amphibolites and rhyolites from the TV4100 and TH4100 boreholes at the Sanford Underground Research Laboratory (SURF). Elastic properties include Young's modulus, Poisson...

Jahnke, B. et al Lawrence Berkeley National Laboratory

Dec 18, 2020
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Groundwater Levels Updated March 2022

This Excel spreadsheet contains Utah FORGE groundwater data for wells WOW2 and WOW3. The data was updated on March 16th, 2022 and contains legacy data. Groundwater data includes the level, offset, date, and time for each measurement. Temperature, drift, water elevation and other p...

Kirby, S. Utah Geological Survey

Mar 16, 2022
1 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: Downhole Lithologic Data

x,y,z downhole lithologic logs for the wells in and around the West Flank FORGE site based on a review of cuttings, core, and mud logs.

Blankenship, D. Sandia National Laboratories

Mar 01, 2016
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Core Logs

Core logs and photos from the EGS Collab project Experiment 2 for the Top Vertical well (TV4100) and the Top Horizontal well (TV 4100) on the 4100 Level of SURF (the Sanford Underground Research Facility). The core logs are stored in a single PDF file with 5-ft run intervals. In t...

Dobson, P. et al Lawrence Berkeley National Laboratory

Jul 08, 2019
7 Resources
0 Stars
Publicly accessible

Utah FORGE: Groundwater Levels Updated 2021

Contains Utah FORGE ground water data for wells WOW2 and WOW3. The data was updated on October 5th, 2021 and contains legacy data. Groundwater data includes the level, offset, date, and time for each measurement. Temperature, drift, water elevation and other parameters are recorde...

Kirby, S. Energy and Geoscience Institute at the University of Utah

Oct 05, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Composite 3D Seismic Velocity Model

This is a composite 3D seismic velocity that was constructed from compiled information from several local studies regarding seismic velocities and structural information. This seismic velocity model is provided in NonLinLoc format (slow_len), which is readily usable in NonLinLoc ...

Finger, C. et al University of Utah Seismograph Stations

Feb 09, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: 2024 Stimulations Microseismic Event Catalog from Seismic Surface Network

This archive provides a a link to a microseismic event catalog of the 2024 stimulations at Utah FORGE. The catalog was derived from data collected with the surface monitoring network consisting of 5 permanent seismic stations deployed by the University of Utah Seismograph Station...

Niemz, P. et al University of Utah Seismograph Stations

Jul 29, 2024
2 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Continuous Active-Source Seismic Monitoring (CASSM) Data

The U.S. Department of Energy's Enhanced Geothermal System (EGS) Collab project aims to improve our understanding of hydraulic stimulations in crystalline rock for enhanced geothermal energy production through execution of intensely monitored meso-scale experiments. The first expe...

Schoenball, M. and Sprinkle, P. Lawrence Berkeley National Laboratory

Apr 25, 2018
6 Resources
0 Stars
Publicly accessible

Utah FORGE: Milford Deep Test Well 58-32 (MU-ESW1) Pressure and Temperature Logs

This archive consists of a pdf graphic log and a LAS text file representing the results of the pressure and temperature logs measured on Nov. 8th, 2018 from the Utah FORGE deep test well 58-32 (MU-ESW1). The logs were taken by DI Drill Survey Services.

Moore, J. Energy and Geoscience Institute at the University of Utah

Nov 08, 2018
1 Resources
0 Stars
Publicly accessible

<< Previous 30 31 32 33 34 35 36 37 38 39 Next >>