Search OEDI Data

Utah FORGE: Temperature-Dependent Fracture Seismicity from Fluid Injection Experiments

This dataset contains experimental data from fluid injection experiments conducted to investigate the influence of temperature on fracture seismicity. The experiments were performed on granite samples from Utah FORGE. The samples were prepared with a 30-degree inclined fracture an...

Wang, J. et al Pennsylvania State University

Feb 29, 2024
4 Resources
0 Stars
Publicly accessible

Oilwell Conversion (Well API 121913310501) to Geothermal Heat Storage Well for Flexible Electricity Storage

Geothermal growth is limited by a lack of geographically dispersed high-temperature thermal resources and high initial upfront investment in characterization and well construction. This project intended to address the challenges of energy supply intermittency and enhance grid resi...

Malkewicz, N. et al University of Illinois

May 05, 2021
8 Resources
0 Stars
Publicly accessible

Play Fairway Analysis Retrospective GeoRePORTs

NREL, as part of the Play Fairway Analysis (PFA) Retrospective and with assistance from PFA PIs, completed GeoRePORTs for the sites identified in Phases 1&2 of the DOE PFA projects. The GeoRePORT (geothermal resource portfolio optimization and reporting technique) uses two factor...

Kolker, A. et al National Renewable Energy Laboratory

Dec 01, 2020
36 Resources
0 Stars
Publicly accessible

Low-Temperature Geothermal Geospatial Datasets: An Example from Alaska

This project is a component of a broader effort focused on geothermal heating and cooling (GHC) with the aim of illustrating the numerous benefits of incorporating GHC and geothermal heat exchange (GHX) into community energy planning and national decarbonization strategies. To bet...

Davalos Elizondo, E. et al National Renewable Energy Laboratory

Feb 06, 2023
6 Resources
0 Stars
Publicly accessible

Chemical, Calcium Phosphate Cements for Geothermal Wells Corrosion Protection, Bond Strength and Matrix Self-Healing

The data set shows performance of economical calcium phosphate cement (Fondu) blended with fly ash, class F (FAF) in carbon steel corrosion protection tests (corrosion rate, corrosion current and potential), bond and matrix strength, as well as matrix strength recovery after impos...

Sugama, T. Brookhaven National Laboratory

Sep 26, 2017
2 Resources
0 Stars
Publicly accessible

Fracture Sustainability Pressure, Temperature, Differential Pressure, and Aperture Closure Data

In these data sets, the experiment time, actual date and time, room temperature, sample temperature, upstream and downstream pressures (measured independently), corrected differential pressure (measured independently and corrected for offset and room temperature) indication of ape...

Kneafsey, T. Lawrence Berkeley National Laboratory

Sep 30, 2016
5 Resources
0 Stars
Publicly accessible

Maine Geological Survey Borehole Temperature Profiles

This dataset includes temperature profiles from 30 boreholes throughout Maine that were selected for their depth, location, and lithologies encountered. Depths range from about 300 feet to 2,200 feet. Most of the boreholes selected for measurement were completed in granite becau...

Marvinney, R. Arizona State Geological Survey

Nov 06, 2013
2 Resources
0 Stars
Publicly accessible

Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Fine Scale Stress Test Modelling

Mesh, properties, initial conditions, injection/withdrawal rates for modelling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from ground for Stockton University reservoir cooling system (aquifer storage cooling system), Galloway, New Jersey, fo...

Smith, J. et al Lawrence Berkeley National Laboratory

Feb 22, 2021
14 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Joint Imaging of Fracture Growth and Estimation of Fracture Properties During EGS Development 2024 Annual Workshop Presentation

This is a presentation on the Joint Electromagnetic/Seismic/InSAR Imaging of Spatial-Temporal Fracture Growth and Estimation of Physical Fracture Properties During EGS Resource Development by Lawrence Berkeley National Laboratory, presented by David Alumbaugh. This is a video pres...

Alumbaugh, D. Energy and Geoscience Institute at the University of Utah

Aug 25, 2024
1 Resources
0 Stars
Publicly accessible

Lab-Scale Stimulation Results on Surrogate Fused Silica Samples

Lab-scale stimulation work on non-porous fused silica (similar mechanical properties to igneous rock) was performed using pure water, pure CO2 and water/CO2 mixtures to compare back to back fracturing performance of these fluids with PNNL's StimuFrac.

Fernandez, C. Pacific Northwest National Laboratory

Jul 06, 2016
1 Resources
0 Stars
Publicly accessible

Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Large Scale Grid

Mesh, properties, initial conditions, injection/withdrawal rates for modeling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from ground for Stockton University reservoir cooling system (aquifer storage cooling system), Galloway, New Jersey, on ...

Smith, J. et al Lawrence Berkeley National Laboratory

Feb 26, 2021
15 Resources
0 Stars
Publicly accessible

Utah FORGE: Optimization of a Plug-and-Perf Stimulation (Fervo Energy)

Information around the plug-and-perf treatment design at Utah FORGE by Fervo Energy. Objective and Purpose: Develop a multistage hydraulic stimulation approach designed specifically to target the top three factors that control the technical and commercial viability of an EGS sys...

Norbeck, J. et al Fervo Energy

Feb 08, 2023
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 (MU-ESW1) FMI Log Fracture Results

A Schlumberger Fullbore Formation Micro-Imager (FMI) log was run from 7390 feet to 7527 feet depth in well 58-32, originally known as well MU-ESW1. Well 58-32 was completed in 2017 as part of Utah FORGE Phase 2. It reached a depth of 7536 feet and recorded a bottom hole temperatur...

BLOCHOWICZ, A. Energy and Geoscience Institute at the University of Utah

Mar 06, 2021
1 Resources
0 Stars
Publicly accessible

Fallon FORGE: Analogue Outcrop Samples

Compilation of results for mechanical and fluid flow properties of analogue outcrop samples experimental data for compressional and shear wave velocities, tensile strengths, and compressive strengths. Outcrop location and sample orientation data are documented in a separate csv file.

Blankenship, D. et al Sandia National Laboratories

Mar 12, 2018
2 Resources
0 Stars
Publicly accessible

Active Source Seismic (Ultrasonic) Data from Double-Direct Shear Lab Experiments

Active source ultrasonic data from lab experiments p5270 and p5271 including raw waveforms (WF) and mechanical data (mat). From the PSU team working on the "Machine Learning Approaches to Predicting Induced Seismicity and Imaging Geothermal Reservoir Properties" project. The fric...

Marone, C. Pennsylvania State University

May 05, 2021
1 Resources
0 Stars
Publicly accessible

Data Arrays for Microearthquake (MEQ) Monitoring using Deep Learning for the Newberry EGS Sites

The 'Machine Learning Approaches to Predicting Induced Seismicity and Imaging Geothermal Reservoir Properties' project looks to apply machine learning (ML) methods to Microearthquake (MEQ) data for imaging geothermal reservoir properties and forecasting seismic events, in order to...

Zhu, T. Pennsylvania State University

May 05, 2021
4 Resources
0 Stars
Publicly accessible

Effective Elastic and Neutron Capture Cross Section Calculations Corresponding to Simulated Fluid Properties from CO2 Push-Pull Simulations

The submission contains a .xls files consisting of 10 excel sheets, which contain combined list of pressure, saturation, salinity, temperature profiles from the simulation of CO2 push-pull using Brady reservoir model and the corresponding effective compressional and shear velocity...

Chugunov, N. and Altundas, B. Lawrence Berkeley National Laboratory

Mar 07, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Native State Model 2022 Update

This is the Phase 3 native state model update. The Phase 3 numerical model represents a significant subsurface volume below the FORGE site footprint. The model domain of 4.0 km x 4.0 km x 4.2 km is located approximately between depths of 4000 to 4200 meters below land surface. Thi...

Podgorney, R. and Liu, R. Idaho National Laboratory

Jul 29, 2022
1 Resources
0 Stars
Publicly accessible

SGW paper Rheological Properties of Drilling Fluids Containing Special Additives for Geothermal Drilling Applications

The paper was presented at the 46th Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, California, February 15-17, 2021. In this study, the effectiveness of different additives was evaluated in maintaining drilling fluid rheology at HPHT(high pressure and...

Mohamed, A. et al University of Oklahoma

Jan 04, 2023
1 Resources
0 Stars
Publicly accessible

Raw Neutron Scattering Data for Strain Measurement of Hydraulically Loaded Granite and Marble Samples in Triaxial Stress State

This entry contains raw data files from experiments performed on the Vulcan beamline at the Spallation Neutron Source at Oak Ridge National Laboratory using a pressure cell. Cylindrical granite and marble samples were subjected to confining pressures of either 0 psi or approximate...

Polsky, Y. Oak Ridge National Laboratory

May 23, 2014
58 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Joint EM-Seismic-InSAR Imaging of Fracture Properties Workshop Presentation

This is a presentation on the Joint Electromagnetic/Seismic/InSAR Imaging of Spatial-Temporal Fracture Growth and Estimation of Physical Fracture Properties During EGS Resource Development project by Lawrence Berkeley National Laboratory, presented by Dr. David Alumbaugh, Staff Sc...

Alumbaugh, D. Lawrence Berkeley National Laboratory

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Processed Lab Data for Neural Network-Based Shear Stress Level Prediction

Machine learning can be used to predict fault properties such as shear stress, friction, and time to failure using continuous records of fault zone acoustic emissions. The files are extracted features and labels from lab data (experiment p4679). The features are extracted with a n...

Marone, C. et al Pennsylvania State University

May 14, 2021
3 Resources
0 Stars
Publicly accessible

Newberry Caldera Conceptual Geologic Model

Conceptual model for the Newberry Caldera geothermal area. Model is centered around caldera and evaluates geologic information in tandem with some geophysical datasets to derive a conceptual subsurface model. Includes: Geologic information from the USGS geologic map of Newberry...

Moser, M. et al National Energy Technology Laboratory

Mar 04, 2016
1 Resources
0 Stars
Publicly accessible

STRESSINVERSE Software for Stress Inversion

The STRESSINVERSE code uses an iterative method to find the nodal planes most consistent with the stress field given fault frictional properties. STRESINVERSE inverts the strike, rake and dip from moment tensor solutions for the in-situ state of stress. The code iteratively solves...

Gritto, R. Array Information Technology

Oct 31, 2018
1 Resources
0 Stars
Publicly accessible

Deep Direct-Use Feasibility Study Numerical Modeling and Uncertainty Analysis using iTOUGH2 for West Virginia University

To reduce the geothermal exploration risk, a feasibility study is performed for a deep direct-use system proposed at the West Virginia University (WVU) Morgantown campus. This study applies numerical simulations to investigate reservoir impedance and thermal production. Because of...

Garapati, N. et al West Virginia University

Dec 20, 2019
13 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 7 8 Next >>