Search OEDI Data

Utah FORGE: Phase 3 Ground Water Level Monitoring Data

Groundwater data around the Utah FORGE site has been collected to determine the piezometric levels and compositional variability. Field measurements in 2020 are designed to obtain and survey new groundwater wells that have been drilled on the distal periphery of the Utah FORGE pro...

Kirby, S. Utah geological Survey

Sep 30, 2020
1 Resources
0 Stars
Publicly accessible

WISE-CASING: Surface Seismic Survey at Cymric Field, California Central Valley

This test was conducted at the Chevron Cymric oilfield in the California central valley near Bakersfield. A reflected seismic signal was observed in all three components (x, y, z) of the 3-component Episensor geophone, as well as all phones on the single component array. The arriv...

Wu, Y. et al Lawrence Berkeley National Laboratory

Apr 02, 2018
6 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 2C Seismic Observation and Ground Water Well Data and Well Locations

This submission contains the following data associated with Utah FORGE Phase 2C within the Roosevelt Hot Springs geothermal area: An ArcGIS shapefile with well locations for wells 58-32, 78-32, 68-32, OH-3, OH-4, WOW-2, and WOW-3. Well 58-32 is the deep test well, wells 68-32 an...

Abraham, S. et al Energy and Geoscience Institute at the University of Utah

Mar 26, 2019
6 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Core Logs

Core logs from the EGS Collab project Experiment 1 for the stimulation (Injection) well (E1-I), the Production well (E1-P), and monitoring wells (E1-OT, E1-OB, E1-PST, E1-PSB, E1-PDT, and E1-PDB) on the 4850 Level of SURF (the Sanford Underground Research Facility), single PDF fil...

Dobson, P. et al Lawrence Berkeley National Laboratory

Apr 02, 2019
17 Resources
0 Stars
Publicly accessible

Reservoir Stimulation Optimization with Operational Monitoring for Creation of EGS

EGS field projects have not sustained production at rates greater than 1/2 of what is needed for economic viability. The primary limitation that makes commercial EGS infeasible is our current inability to cost-effectively create high-permeability reservoirs from impermeable, igneo...

A., C. Pacific Northwest National Laboratory

Sep 15, 2014
5 Resources
0 Stars
Publicly accessible

Water Use in Enhanced Geothermal Systems (EGS): Geology of U.S. Stimulation Projects, Water Costs, and Alternative Water Use Policies

According to the Energy Information Administration (EIA) of the U.S. Department of Energy (DOE), geothermal energy generation in the United States is projected to more than triple by 2040 (EIA 2013). This addition, which translates to more than 5 GW of generation capacity, is anti...

Harto, C. et al Argonne National Laboratory

Dec 16, 2014
13 Resources
0 Stars
Publicly accessible

Final Report Earth Source Heat: A Cascaded Systems Approach to DDU of Geothermal Energy on the Cornell Campus

The purpose of this document is to describe the contents contained within Geothermal Data Repository (GDR) node of the National Geothermal Data System (NGDS) that serves as the final report for the project "Earth Source Heat: A Cascaded Systems Approach to DDU of Geothermal Energy...

Tester, J. et al Cornell University

Oct 27, 2019
6 Resources
0 Stars
Publicly accessible

Risk Factor Analysis in Low-Temperature Geothermal Play Fairway Analysis for the Appalachian Basin (GPFA-AB)

This submission contains information used to compute the risk factors for the GPFA-AB project. The risk factors are natural reservoir quality, thermal resource quality, potential for induced seismicity, and utilization. The methods used to combine the risk factors included taking ...

E., T. Cornell University

Sep 30, 2015
191 Resources
0 Stars
Publicly accessible

InSAR Maps of Deformation Covering Raft River, Idaho from 2007 to 2010

This dataset contains maps of deformation covering Raft River, Idaho from 2007 to 2010 calculated from interferometric synthetic aperture radar data. This dataset is used in the study entitled "Inferring geothermal reservoir processes at the Raft River Geothermal Field, Idaho, US...

Reinisch, E. University of Wisconsin

Mar 11, 2007
8 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 InSAR Study Results

Ground movement is evaluated through analysis of Interferometric Synthetic Aperture Radar (InSAR) interferograms. Results indicate there has been no detectable ground movement at millimeter scale. The zipped file in this submission contains a report, maps, and results from the InS...

Feigl, K. and Batzli, S. Department of Geoscience University of Wisconsin-Madison

Sep 24, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Microgravity Data

A 4D microgravity survey began in early 2019 in order to benchmark surface and subsurface elevations prior to Phase 3 drilling and stimulation campaigns. Microgravity stations are collocated with GPS deformation benchmarks and use the same location survey data. Surveys are underta...

Hardwick, C. Utah Geological Survey

Oct 07, 2020
1 Resources
0 Stars
Publicly accessible

Geothermal Reservoir Simulation Results in support of Feasibility Study of Direct District Heating for the Cornell Campus Utilizing Deep Geothermal Energy

This dataset contains input data, code, ReadMe files, output data, and figures that summarize the results of a stochastic analysis of geothermal reservoir production from two potential geothermal reservoirs that were evaluated for the Cornell University Deep Direct-Use project. Th...

Smith, J. and Beckers, K. Cornell University

Oct 29, 2019
10 Resources
0 Stars
Publicly accessible

GeoRePORT Case Studies Coso, WSMR, Dixie Valley, and Chena Hot Springs

The Geothermal Resource Portfolio Optimization and Reporting Technique (GeoRePORT) was developed with funding from the U.S. Department of Energy Geothermal Technologies Office to assist in identifying and pursuing long-term investment strategies through the development of a resour...

Kolker, A. et al National Renewable Energy Laboratory

Sep 30, 2019
6 Resources
0 Stars
Publicly accessible

Utah FORGE Phase 3 Native State Model: 2022 Update

This is the Phase 3 native state model update. The Phase 3 numerical model represents a significant subsurface volume below the FORGE site footprint. The model domain of 4.0 km x 4.0 km x 4.2 km is located approximately between depths of 4000 to 4200 meters below land surface. Thi...

Podgorney, R. and Liu, R. Idaho National Laboratory

Jul 29, 2022
1 Resources
0 Stars
Publicly accessible

Elevation Grid for top Columbia River Basalt (CRBG) in the Portland Basin used in DDU Feasibility Study

The Portland Basin is a prime location to assess the feasibility of DDU-TES because natural geologic conditions provide thermal and hydraulic separation from overlying aquifers that would otherwise sweep away stored heat. Under the Portland Basin, the lower Columbia River Basalt G...

Bershaw, J. and Scanlon, D. Portland State University

Dec 01, 2018
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Updated Seismic Event Catalogue from the April, 2022 Stimulation of Well 16A(78)-32

These are revised catalogs, related to the April, 2022 well 16A(78)-32 stimulation (phases 1,2, & 3), provided by Geo Energie Suisse (GES) that include additional events at the start of Stage 1 and some tidying up of some locations. These catalogs also include events for additiona...

Dyer, B. et al University of Utah Seismograph Stations

Nov 09, 2022
1 Resources
0 Stars
Publicly accessible

Utah FORGE Project 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements

The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...

Alumbaugh, D. et al Lawrence Berkeley National Laboratory

Dec 01, 2022
5 Resources
0 Stars
Publicly accessible

Directional Cooling-Induced Fracturing: Directional Cooling Data Under True-Triaxial Stress State

Data includes Directional Cooling-Induced Fracturing (DCIF) testing data using westerly granite blocks. This submission includes data from two samples of westerly granite, lab sample 7 and 8. Files contain stress, temperature and acoustic emission data acquired during polyaxial, l...

Trzeciak, M. University of Wisconsin-Madison

Jul 01, 2022
8 Resources
0 Stars
Publicly accessible

High Temperature Evaluation of Tantalum Capacitors Test 1

Tantalum capacitors can provide much higher capacitance at high-temperatures than the ceramic capacitors. This study evaluates selected tantalum capacitors at high temperatures to determine their suitability for you in geothermal field. This data set contains results of the first ...

Cieslewski, G. Sandia National Laboratories

Sep 28, 2014
21 Resources
0 Stars
Publicly accessible

Seismic Survey 2016 Data at San Emidio Nevada

Included here are seismic data recorded at the San Emidio Geothermal field in Nevada. This passive seismic data were collected as part of the DOE-funded Subsurface Technology and Engineering R&D (SubTER) project to advance imaging and characterization of geothermal permeability. ...

Lord, N. et al University of Wisconsin-Madison

Jan 05, 2016
4 Resources
0 Stars
Publicly accessible

Sample Data from a Distributed Acoustic Sensing Experiment at Garner Valley, California

In September 2013, an experiment using Distributed Acoustic Sensing (DAS) was conducted at Garner Valley, a test site of the University of California Santa Barbara (Lancelle et al., 2014). This submission includes one 45 kN shear shaker (called "large shaker" on the basemap) test ...

Lancelle, C. University of Wisconsin

Sep 10, 2013
10 Resources
0 Stars
Publicly accessible

Snake River Plain Play Fairway Analysis: Phase 2 Report and Phase 3 Proposal

This report presents the results of Phase 2 of the Snake River Plain Play Fairway Analysis project, and a summary of proposed work for Phase 3. Phase 2 focused on new data collection in specific areas of interest identified in Phase 1. These data include new magnetotelluric, seism...

Shervais, J. et al Utah State University

Sep 05, 2017
1 Resources
0 Stars
Publicly accessible

Evaluation Data of a High Temperature COTS (Commercial Off-the-Shelf) Flash Memory Module (TI SM28VLT32) for Use in Geothermal Electronics Packages

The accompanying raw data is composslection. Each file is 3 columns and tab-delimited with the first column being the data address, the second column being the first byte of the data, and the third column being the second byte of the data.

Cashion, A. Sandia National Laboratories

Aug 29, 2014
22 Resources
0 Stars
Publicly accessible

USU Camas-1 Test Well: Documentation

This submission contains documents that describe the USU Camas-1 test well, drilled in Camas Prairie, Idaho, in Fall 2018 and Fall 2019. The purpose of this well is to validate exploration methodologies of the Snake River Plain (SRP) Play Fairway Analysis (PFA) project.

Shervais, J. Utah State University

Oct 31, 2018
13 Resources
0 Stars
Publicly accessible

Utah FORGE LBNL 3-2535 Preliminary Report on Development of a Reservoir Seismic Velocity Model

This report describes the development of a preliminary 3D seismic velocity model at the Utah FORGE site and first results from estimating seismic resolution in the generated fracture volume during Stage 3 of the April 2022 stimulation. A preliminary 3D velocity model for the larg...

Gritto, R. Array Information Technology

Jan 30, 2023
1 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 7 8 Next >>