Search OEDI Data

Showing results 651 - 675 of 2639.
Show results per page.
Order by:
Available Now:
Research Areas
Accessibility
Data Type
Organization
Source
"End of Well"×

Greenbuilt Construction Energy Efficiency Retrofit House Demonstration Sacramento

One of the homes that was part of Sacramento Municipal Utility District's (SMUD) Energy Efficiency Retrofit Demonstration (EERD) project was a 1980's era home in Fair Oaks, California, referred to as the Greenbuilt house, as Greenbuilt Construction completed the retrofit of the h...
Sparn, B. et al Mountain Energy Partnership
Aug 27, 2018
8 Resources
0 Stars
Publicly accessible

Direct-Drive Electrical Generator and PTO System for Flap-type Wave Energy Converters

Project and generator specifications and initial prototype test data for flap-type wave energy converters (WEC)
Englebretson, S. ABB Inc.
Mar 20, 2015
2 Resources
0 Stars
Publicly accessible

Raw Data from National Wind Technology Center M2 Tower (2001 2011)

This raw data reflects readings from instruments mounted on or near a 82 meter meteorological tower located at the [National Wind Technology Center (NWTC)](http://www.nrel.gov/wind/ "NWTC website"), approximately 5 miles south of Boulder, CO (specifically: 39.9107 N, 105.2348 W, d...
Hallett, K. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Geocellular model of St. Peter Sandstone for University of Illinois at Urbana-Champaign DDU Feasibility Study

The geocellular model of the St. Peter Sandstone was constructed for the University of Illinois at Urbana-Champaign DDU feasibility study. Starting with the initial area of review (18.0 km by 18.1 km [11.2 miles by 11.3 miles]) the boundaries of the model were trimmed down to 9.7 ...
Damico, J. University of Illinois
Dec 31, 2018
5 Resources
0 Stars
Publicly accessible

Geocellular Model of Mt. Simon Sandstone for University of Illinois at Urbana-Champaign DDU feasibility study

The geocellular model of the Mt. Simon Sandstone was constructed for the University of Illinois at Urbana-Champaign DDU feasibility study. Starting with the initial area of review (18.0 km by 18.1 km [11.2 miles by 11.3 miles]) the boundaries of the model were trimmed down to 9.7 ...
Damico, J. University of Illinois
Dec 31, 2018
4 Resources
0 Stars
Publicly accessible

Innovative Play Fairway Modelling Applied to the Tularosa Basin Project Report

This report describes all of the work done in Phase I of a geothermal exploration project in the Tularosa Basin, as well as an outline for Phase II work, and more.
Bennett, C. et al University of Utah
Oct 16, 2015
1 Resources
0 Stars
Publicly accessible

Fallon FORGE: Gravity and Magnetics Data

This package contains principal facts for new gravity data collected September November 2017 in support of the Fallon FORGE project. Also included are rock core density and magnetic susceptibility data for key core intervals, used in modeling 2D and 3D gravity inversions. Indivi...
Blankenship, D. et al Sandia National Laboratories
Mar 09, 2018
4 Resources
0 Stars
Publicly accessible

Monitoring of Double-Stud Wall Moisture Conditions in the Northeast

BSC TO5 Task 2.2 Monitoring of Double Stud Wall Moisture Conditions in the Northeast Field test data available for wood moisture contents, temperature, and relative humidity. STRUCTURE House Devens, MA 01432 Three double-stud assemblies were compared: 12-in. ocSPF, 12-in. cellulo...
Ueno, K. Building Science Corporation
Apr 27, 2016
2 Resources
0 Stars
Publicly accessible

Stanford Thermal Earth Model for the Conterminous United States

Provided here are various forms of the Stanford Thermal Earth Model, as well as the data and methods used for its creation. The predictions produced by this model were visualized in two-dimensional spatial maps across the modeled depths (0-7 km) for the conterminous United States....
Aljubran, M. and Horne, R. Stanford University
Mar 14, 2024
9 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2514: A Strain Sensing Array to Characterize Deformation at the FORGE Site Workshop Presentation

This is a presentation on the Strain Sensing Array to Characterize Deformation at the FORGE Site project by Clemson University, presented by Lawrence Murdoch. The project's objective was to evaluate the feasibility of measuring and interpreting tensor strain data to improve the pe...
Murdoch, L. et al Clemson University
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Geothermal Geodatabase for Routt Hot Springs, Routt County, Colorado

This geodatabase was built to cover several geothermal targets developed by Flint Geothermal in 2012 during a search for high-temperature systems that could be exploited for electric power development. Several of the thermal springs and wells in the Routt Hot Spring and Steamboat ...
Zehner, R. Flint Geothermal, LLC
Nov 01, 2012
1 Resources
0 Stars
Publicly accessible

Geothermal Geodatabase for Wagon Wheel Hot Springs, Mineral County, Colorado

This geodatabase was built to cover several geothermal targets developed by Flint Geothermal in 2012 during a search for high-temperature systems that could be exploited for electric power development. Several of the thermal springs at Wagon Wheel Gap have geochemistry and geother...
Zehner, R. Flint Geothermal, LLC
Nov 01, 2012
1 Resources
0 Stars
Publicly accessible

Utah FORGE: X-Ray Diffraction Data

This dataset contains X-ray diffraction (XRD) data taken from wells and outcrops as part of the DOE GTO supported Utah FORGE project located near Roosevelt Hot Springs. It contains an Excel spreadsheet with the XRD data, a text file with sample site names, types, and locations in ...
Nash, G. and Jones, C. Energy and Geoscience Institute at the University of Utah
Feb 07, 2018
3 Resources
0 Stars
Publicly accessible

UMass 2-Body WEC Techno-Economic Assessment

The University of Massachusetts (UMass) is developing a 2-body wave energy converter (WEC) device that is converting mechanical power into electricity using a mechanical motion rectifier that allows the system to couple to a flywheel. UMass has completed numerical modeling, wave t...
Previsic, M. Re Vision Consulting
Nov 19, 2024
2 Resources
0 Stars
Publicly accessible

Linearized Distribution Optimal Power Flow for OEDI SI

This research is to meant to demonstrate the OEDI SI use case for distributed optimal power flow (DOPF). The goal was to formulate the optimal power flow problem in the distribution system for active and reactive power setpoints of PV systems using topology information and voltage...
Sadnan, R. et al Pacific Northwest National Laboratory
Oct 03, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Triaxial Direct Shear Results

This submission contains a report and associated data from triaxial direct shear tests conducted by Los Alamos National Laboratory. The samples used were sourced from 16A(78)-32 well core. The primary objectives of this test were to determine the shear strength in both intact an...
Frash, L. et al Los Alamos National Laboratory
Aug 14, 2023
2 Resources
0 Stars
Publicly accessible

Altona Field Lab Inverse Model WRR 2020

Includes data for measured inert tracer breakthrough curves first reported in Hawkins (2020) (Water Resources Research). In addition, this submission includes the production well temperature measurements first reported in Hawkins et al. (2017a) (Water Resources Research, volume 53...
Tester, J. Cornell University
Jan 01, 2015
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Seismic Stations and Wells GPS Survey Data, 2021

This is a CSV spreadsheet containing UTM and Latitude and Longitude coordinates and elevations for Wells 78-32, 58-32, and 16A(78)-32 and BOR1, BOR2, BOR3, FOR2, FOR5, FORK, FORU, and FORW seismic stations. These are from a GPS survey conducted by the Utah Geological Survey in Jun...
Erickson, B. Utah Geological Survey
Jun 30, 2021
1 Resources
0 Stars
Publicly accessible

Harsh Environment Sensors for Geothermal Applications

Technical papers detailing the development of harsh environment sensors for geothermal applications. Principle Investigator is Prof. Albert P. Pisano (University of California, Berkeley). Submission includes a paper about geothermal environmental exposure testing on encapsulant a...
Senesky, D. et al Regents of the University University of California
Jan 01, 2012
2 Resources
0 Stars
Publicly accessible

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Geomechanical Packer Formation Model Iteraction

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This presentation outlines the work in rock modelling and interaction with the ...
Ghassemi, A. et al Welltec
Jun 20, 2023
2 Resources
0 Stars
Publicly accessible

Utah FORGE 4-2492: Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery Workshop Presentation

This is a presentation on the Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery Efficiency at the Utah FORGE Site project by The University of Texas at Austin, presented by Professor Mukul M. Sharma. The project's objectives were to place f...
Sharma, M. The University of Texas at Austin
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Development of a Downhole Tracer and pH Measurement Instrument for Application in Geothermal Wells

Due the high temperature and pressure conditions found in geothermal wells, tracer studies designed to elucidate properties of geothermal reservoirs are traditionally conducted by pulling liquid samples from the wellhead. These samples are then sent off for analysis in a fixed lab...
Hess, R. et al Sandia National Laboratories
Sep 11, 2013
1 Resources
0 Stars
Publicly accessible

SGW paper Rheological Properties of Drilling Fluids Containing Special Additives for Geothermal Drilling Applications

The paper was presented at the 46th Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, California, February 15-17, 2021. In this study, the effectiveness of different additives was evaluated in maintaining drilling fluid rheology at HPHT(high pressure and...
Mohamed, A. et al University of Oklahoma
Jan 04, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 1-2410: Development of a Smart Completion and Stimulation Solution Workshop Presentation

This is a presentation on the Development of a Smart Completion & Stimulation Solution project by Welltec in collaboration with the University of Oklahoma, presented by Yosafat Esquitin, a Senior Business Development Manager at Welltec. The project's objective was to develop an an...
Esquitin, Y. et al Welltec
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Tidal Current Cross-flow Turbine Wake ADV and PIV Data

Measurements in the wake of a high-solidity cross-flow turbine in a laboratory flume obtained using Acoustic Doppler Velocimetry and Particle Image Velocimetry for the purposes of characterizing the turbine wake and comparing the methods.
Polagye, B. University of Washington
Dec 06, 2016
6 Resources
0 Stars
Publicly accessible
<< Previous22232425262728293031Next >>