Search OEDI Data

Brady Hot Springs Seismic Modeling Data for Push-Pull Project

This submission includes synthetic seismic modeling data for the Push-Pull project at Brady Hot Springs, NV. The synthetic seismic is all generated by finite-difference method regarding different fracture and rock properties.

Zhang, R. University of Louisiana

Jul 31, 2018
56 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2404: Application of Advanced Techniques for Determination of Reservoir-Scale Stress State 2024 Annual Workshop Presentation

This is a presentation on the Application of Advanced Techniques for Determination of Reservoir-Scale Stress State at FORGE by the University of Oklahoma, presented by Ahmad Ghassemi. This video discusses how magnitude and orientation of natural in-situ principal stresses at dept...

Ghassemi, A. et al Energy and Geoscience Institute at the University of Utah

Aug 28, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE 7-3639: Design and Implementation of a Novel Multi-Frac Stimulation Concept 2024 Annual Workshop Presentation

This is a presentation on the Design and Implementation of a Novel Multi-Frac Stimulation Concept by The University of Oklahoma, presented by Ahmad Ghassemi. This slide presentation video discusses the design and implementation of a reservoir stimulation concept improving near-wel...

Ghassemi, A. and Jeffery, R. Energy and Geoscience Institute at the University of Utah

Sep 02, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: 2023 Induced Seismicity Mitigation Plan

This is the updated Utah FORGE Phase 3B induced seismicity mitigation plan (ISMP) covering the general Utah FORGE area. This new version incorporates newly collected seismic data, including data collected during the 2022 stimulation and a probabilistic seismic hazard assessment (...

Pankow, K. et al University of Utah Seismograph Stations

Aug 09, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16B(78)-32 Reinterpretation of Thrubit FMI Log

This dataset contains a reinterpretation of the trip 3, Thrubit FMI log from Utah FORGE well 16B(78)-32, covering measured depths from 6,254 to 10,839 feet. Acquired by Schlumberger on May 23, 2023, this version includes newly interpreted tensile drilling-induced fractures, in add...

Wray, A. and Hamilton, D. Energy and Geoscience Institute at the University of Utah

May 23, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2446: Connecting In Situ Stress and Wellbore Deviation to Near-Well Fracture Complexity using Phase-Field Simulations

This report presents a series of numerical experiments investigating the relationships among near-well fracture complexity, in situ stress conditions, and wellbore deviation. Using a phase-field modeling approach, the study explores how factors such as stress regimes, wellbore ori...

Cusini, M. and Fei, F. Lawrence Livermore National Laboratory

Jan 30, 2025
2 Resources
0 Stars
Publicly accessible

Reactive Transport Modeling of Aquifer Thermal Energy Storage System at Stockton, NJ

This is the modeling data (input/output files of TOUGHREACT 4.10) used to simulate the reactive transport processes of the Aquifer Thermal Energy Storage (ATES) operations at Stockton University, NJ. Readme.txt lists all the files. TOUGHREACT 4.10 requires to reproduce the modelin...

Kumar, R. et al Lawrence Berkeley National Laboratory

Oct 20, 2021
4 Resources
0 Stars
Publicly accessible

Fallon FORGE: Distinct Element Reservoir Modeling

Archive containing input/output data for distinct element reservoir modeling for Fallon FORGE. Models created using 3DEC, InSite, and in-house Python algorithms (ITASCA). List of archived files follows; please see 'Modeling Metadata.pdf' (included as a resource below) for addition...

Blankenship, D. et al Sandia National Laboratories

Mar 12, 2018
2 Resources
0 Stars
Publicly accessible

Numerical Modeling for Hydraulic Fracture Prediction

Numerical modeling on fused silica cylindrical materials for predicting overpressures required to fracture an homogeneous pure (surrogate) material with known mechanical properties similar to igneous rock materials and later compare these values to experimental overpressures obtai...

Gupta, V. Pacific Northwest National Laboratory

Apr 26, 2016
1 Resources
0 Stars
Publicly accessible

Hawaii Play Fairway Analysis Model

Custom MATLAB and custom GMT scripts for Hawaii Play Fairway Analysis modeling.

Lautze, N. University of Hawaii

Jan 01, 2015
2 Resources
0 Stars
Publicly accessible

EGS Collab: Modeling and Simulation Working Group Teleconference Series (129-130)

This submission contains the presentation slides and recordings from EGS Collab Modeling and Simulation Working Group (MSWG) teleconferences number 129 through 130. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field act...

White, M. et al Pacific Northwest National Laboratory

Jun 22, 2022
3 Resources
0 Stars
Publicly accessible

Geomechanical Modeling for Thermal Spallation Drilling

Wells for Engineered Geothermal Systems (EGS) typically occur in conditions presenting significant challenges for conventional rotary and percussive drilling technologies: granitic rocks that reduce drilling speeds and cause substantial equipment wear. Thermal spallation drilling,...

Walsh, S. et al Lawrence Livermore National Laboratory

Aug 24, 2011
1 Resources
0 Stars
Publicly accessible

Community Geothermal: Energy, Cost, and Carbon Modeling for District Design Ann Arbor, MI

This data includes results on an analysis of existing and projected energy, cost, and carbon for the City of Ann Arbor District Geothermal Design and Deployment to Equitably Decarbonize Low Income Neighborhoods in Ann Arbor project. The scope of the project includes designing and ...

Lee, J. and McMillen, A. IMEG Corp

Jan 01, 2024
31 Resources
0 Stars
Publicly accessible

Maui Gravity and Soil Gas Surveys

Contains a ground-based gravity survey of South Maui and a series of soil CO2 flux and temperature surveys encompassing Maui and the Big Island. The gravity survey was collected from approximately 284 km2 and consisted of 400 gravity stations with 400 m spacing. Locations were de...

Akerley, J. Ormat Nevada Inc

Apr 01, 2010
2 Resources
0 Stars
Publicly accessible

Resource Analysis for Deep Direct-Use Feasibility Study in East Texas

The National Renewable Energy Laboratory, Southern Methodist University Geothermal Laboratory, Eastman Chemical, Turbine Air Systems, and the Electric Power Research Institute are evaluating the feasibility of using geothermal heat to improve the efficiency of natural gas power pl...

Richards, M. et al Southern Methodist University

Jun 28, 2018
13 Resources
0 Stars
Publicly accessible

Utah FORGE 4-2541: Optimization and Validation of a Plug-and-Perf Stimulation Treatment Design Workshop Presentation

This is a presentation on the Optimization and Validation of a Plug-and-Perf Stimulation Treatment Design at Utah FORGE project by Fervo Energy, presented by Sireesh Dadi. The project's objective was to develop a multistage hydraulic stimulation approach designed specifically to t...

Dadi, S. and Norbeck, J. Fervo Energy

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

University of Illinois Campus Deep Direct-Use Feasibility Study Designs for Deep Injection and Monitoring Wells

The following information is provided about the design of deeps wells constructed in the Illinois Basin to store, sequester, or dispose of CO2, natural gas, and industrial wastes.

Lin, Y. et al University of Illinois

Mar 30, 2018
3 Resources
0 Stars
Publicly accessible

Three Dimensional Thermal Model of Newberry Volcano, Oregon

Final results of a 3D finite difference thermal model of Newberry Volcano, Oregon. Model data are formatted as a text file with four data columns (X, Y, Z, T). X and Y coordinates are in UTM (NAD83 Zone 10N), Z is elevation from mean sea level (meters), T is temperature in deg C. ...

Frone, Z. and Cladouhos, T. AltaRock Energy Inc

Jan 30, 2015
3 Resources
0 Stars
Publicly accessible

Simulation Tools for Modeling Thermal Spallation Drilling on Multiple Scales

Widespread adoption of geothermal energy will require access to deeply buried resources in granitic basement rocks at high temperatures and pressures. Exploiting these resources necessitates novel methods for drilling, stimulation, and maintenance, under operating conditions that ...

Walsh, S. et al Lawrence Livermore National Laboratory

Jan 01, 2012
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Modeling Studies of Energized Steel-Casing Source EM Method for Detecting Stimulated Zone

Numerical modeling Studies for electromagnetic (EM) Data Acquisition Survey Design this milestone report describes the 3D modeling studies of energized steel-casing source electromagnetic method for detecting stimulated zone at the Utah FORGE Site. FORGE project 3-2535 is planning...

Um, E. et al Lawrence Berkeley National Laboratory

Feb 06, 2023
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Report and Associated Data from Measuring and Modeling Deformation 2018 through 2024

The report provided here describes research activities between August 16th, 2018 and July 30th, 2024. The goals of the research activities are to conduct an Interferometric Synthetic Aperture Radar (InSAR) analysis and Ground Surface Deformation Modeling at the Utah FORGE site. In...

Feigl, K. and Batzli, S. University of Wisconsin Madison

Aug 16, 2018
6 Resources
0 Stars
Publicly accessible

Utah FORGE: Data for 3-D Model Development Lithology, Temperature, Pressure, and Stress

This submission comprises two downloadable .zip archives. Each archive contains spreadsheets with 3-D data and a .txt document describing the data. The Mesh Files .zip download contains data regarding the lithologic contacts of the granitoid and overlying sedimentary basin fill. T...

Podgorney, R. Idaho National Laboratory

Mar 17, 2020
2 Resources
0 Stars
Publicly accessible

Stimulation at Desert Peak Modeling with the Coupled THM Code FEHM

Numerical modeling of the 2011 shear stimulation at the Desert Peak Well 27-15 using a coupled thermal-hydrological-mechanical simulator. This submission contains the finite element heat and mass transfer (FEHM) executable code for a 64-bit PC Windows-7 machine, and the input and ...

Kelkar, S. et al Los Alamos National Laboratory

Apr 30, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439: A Multi-Component Approach to Characterizing In-Situ Stress: Laboratory, Modeling and Field Measurement Workshop Presentation

This is a presentation on A Multi-Component Approach to Characterizing In-Situ Stress at the U.S DOE FORGE EGS Site: Laboratory, Modeling and Field Measurement project by Battelle [Columbus, OH], presented by Mark Kelley. The project's objective was to characterize stress in the U...

Kelley, M. and Bunger, A. Battelle Memorial Institute