Search OEDI Data
Showing results 301 - 325 of 451.
Show
results per page.
Order by:
Available Now:
Research Areas
Accessibility
Data Type
Organization
Source
Fallon FORGE: 3D Geologic Model
An x,y,z scattered data file for the 3D geologic model of the Fallon FORGE site. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding al...
Blankenship, D. Sandia National Laboratories
Mar 01, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
West Flank Coso FORGE: MT Station Locations
This data includes the locations of the MT data collected in and around the Coso Geothermal field that covered the West Flank area. These are the data that the 3D MT models were created from that were discussed in Phase 1 of the West Flank FORGE project.
The projected coordinate ...
Blankenship, D. Sandia National Laboratories
May 04, 2011
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Telluric Monitoring Experiment Transfer Functions
The Utah Frontier Observatory for Research in Geothermal Energy (FORGE) attempted a stimulation at well 16A(78)-32 during April and May 2022. We recorded telluric and magnetotelluric (MT) data before, during, and after the well stimulation experiment using the FORGE Telluric Monit...
Mendoza, K. and Wannamaker, P. Energy and Geoscience Institute at the University of Utah
May 27, 2022
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Fallon FORGE: Thermal-Hydrological-Mechanical Models
Archive contains thermal-mechanical simulation input/output files. Included are files which fall into the following categories:
( 1 ) Spreadsheets with various input parameter calculations
( 2 ) Final Simulation Inputs
( 3 ) Native-State Thermal-Hydrological Model Input File Fol...
Blankenship, D. and Sonnenthal, E. Sandia National Laboratories
Mar 12, 2018
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Fallon FORGE: Fluid Geochemistry
Fluid geochemistry analysis for wells supporting the Fallon FORGE project. Samples were collected from geothermal wells using standard geothermal water sampling techniques, including filtration and acidification of the cation sample to pH < 2 prior to geochemical analysis. Analyse...
Blankenship, D. and Ayling, B. Sandia National Laboratories
Mar 13, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Deep Direct-Use Feasibility Study Energy Demand Characterization and Surface Plant Modeling for West Virginia University
This dataset provides information gathered to determine end use load and assessment of existing district heating systems (DHS). It also provides Aspen simulation files used to model hybrid natural gas geothermal district heating and cooling (GDHC) system along with Exchange Design...
Garapati, N. West Virginia University
Jan 09, 2020
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Geothermal Development and the Use of Categorical Exclusions Under NEPA
This study focuses primarily on the Categorial Exclusions (CX) process and its applicability to geothermal exploration. In this paper, we:
Provide generalized background information on CXs, including previous NEPA reports addressing CXs, the process for developing CXs, and the ro...
Young, K. and Levine, A. National Renewable Energy Laboratory
Sep 30, 2014
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Hawthorne Nevada Deep Direct-Use Feasibility Study 3D Seismic
The objective of this project is to use a multi-disciplinary, three-tiered approach to assess the geothermal resource and determine the feasibility of implementing a large-scale, direct-use facility for the Hawthorne Army Depot (HAD) and the various town and county facilities in H...
Lowry, T. et al Nevada Bureau of Mines and Geology
Mar 29, 2018
6 Resources
0 Stars
Publicly accessible
6 Resources
0 Stars
Publicly accessible
Hawthorne Nevada Deep Direct-Use Feasibility Study Navy Geothermal Program Office General Data
The objective of this project is to use a multi-disciplinary, three-tiered approach to assess the geothermal resource and determine the feasibility of implementing a large-scale, direct-use facility for the Hawthorne Army Depot (HAD) and the various town and county facilities in H...
Lowry, T. Nevada Bureau of Mines and Geology
Mar 29, 2018
7 Resources
0 Stars
Publicly accessible
7 Resources
0 Stars
Publicly accessible
Snake River Plain Play Fairway Analysis: Phase 1 Report
This presents the results of Phase 1 of the Snake River Plain Play Fairway Analysis project, along with a proposed work for Phase 2. No new data were collected, but we list data sources for our compilation.
The Snake River volcanic province (SRP) overlies a thermal anomaly that e...
Shervais, J. et al Utah State University
Jan 25, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Model results and data for Nontechnical Barriers to Geothermal Development
Data included in this submission support the analysis conducted for the report "Nontechnical Barriers to Geothermal Development" which is linked bellow. These data include information about the power purchase agreements (PPAs) analyzed for the report, inputs and model results for ...
Rabinowitz, H. et al Pacific Northwest National Laboratory
Jul 25, 2022
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Resource Reporting Methodology Analysis and Development of Geothermal Reporting Metric for the Geothermal Technologies Office Hydrothermal Program
The US Geological Survey (USGS) resource assessment (Williams et al., 2009) outlined a mean 30GWe of undiscovered hydrothermal resource in the western US. One goal of the Geothermal Technologies Office (GTO) is to accelerate the development of this undiscovered resource. The Geoth...
YoungNational Renewable Energy Laboratory
Jan 19, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Magnetotelluric Data Collected in 2016 over the San Emidio Geothermal Field in Nevada
This data set includes the magnetotelluric (MT) data collected from October 21 to November 9, 2016 over the San Emidio geothermal field in Nevada by Quantec Geoscience USA Inc. on behalf of US Geothermal Inc. as part of a project entitled "A Novel Approach to Map Permeability Usi...
Folsom, M. et al Ormat Technologies, Inc.
Nov 09, 2016
11 Resources
0 Stars
Publicly accessible
11 Resources
0 Stars
Publicly accessible
Fallon FORGE: Well Data, Geophysical Data, and Geologic Maps
The data is associated to the Fallon FORGE project and includes mudlogs for all wells used to characterize the subsurface, as wells as gravity, magnetotelluric, earthquake seismicity, and temperature data from the Navy GPO and Ormat. Also included are geologic maps from the USGS a...
Blankenship, D. Sandia National Laboratories
Mar 31, 2016
54 Resources
0 Stars
Publicly accessible
54 Resources
0 Stars
Publicly accessible
Snake River Plain FORGE: Well Data for WO-2
Well data for the WO-2 well located in eastern Snake River Plain, Idaho. This data collection includes lithology reports, borehole logs, temperature at depth data, neutron density and gamma data, and rock strength parameters for the WO-2 well.
This collection of data has been ass...
Podgorney, R. Idaho National Laboratory
Jul 29, 1991
9 Resources
0 Stars
Publicly accessible
9 Resources
0 Stars
Publicly accessible
EGS Collab Experiment 2: Core Logs
Core logs and photos from the EGS Collab project Experiment 2 for the Top Vertical well (TV4100) and the Top Horizontal well (TV 4100) on the 4100 Level of SURF (the Sanford Underground Research Facility). The core logs are stored in a single PDF file with 5-ft run intervals. In t...
Dobson, P. et al Lawrence Berkeley National Laboratory
Jul 08, 2019
7 Resources
0 Stars
Publicly accessible
7 Resources
0 Stars
Publicly accessible
EGS Collab Experiment 1: Continuous Active-Source Seismic Monitoring (CASSM) Data
The U.S. Department of Energy's Enhanced Geothermal System (EGS) Collab project aims to improve our understanding of hydraulic stimulations in crystalline rock for enhanced geothermal energy production through execution of intensely monitored meso-scale experiments. The first expe...
Schoenball, M. and Sprinkle, P. Lawrence Berkeley National Laboratory
Apr 25, 2018
6 Resources
0 Stars
Publicly accessible
6 Resources
0 Stars
Publicly accessible
Irradiation Data from NREL'S MDIC Stations
The Measurement and Instrumentation Data Center (MIDC) provides Irradiance and Meteorological Data from these stations: NREL Solar Radiation Research Lab, BSRN Prototype Station, Atmospheric Optical Calibration System, TSR-1, RSR Version 2, RSR Version 1, National Wind Technology...
Afshin, A. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
1 Resources
0 Stars
In curation
1 Resources
0 Stars
In curation
Utah FORGE: Site Earthquake Animation
This is a .kml earthquake animation covering the period of 1991 2011 for the Utah Milford FORGE site. It displays seismic events using different sized bubbles according to magnitude. It covers the general Utah FORGE area (large shaded rectangle) with the final site displayed as a ...
Moore, J. Energy and Geoscience Institute at the University of Utah
Mar 13, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: AGRC GIS Database for the State of Utah
This is a link to the Automated Geographic Reference Center (AGRC) that houses GIS data for the state of Utah. This includes geoscience, cadastre, elevation and terrain, digital aerial photography, roads, aquifer data, etc. Several GIS datasets used in the Utah FORGE project origi...
Moore, J. Energy and Geoscience Institute at the University of Utah
Mar 02, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
West Flank Coso FORGE: 3D Geologic Model
This is an x,y,z file of the West Flank FORGE 3D geologic model. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding algorithm.
The da...
Blankenship, D. Sandia National Laboratories
Mar 01, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
West Flank Coso FORGE: Refined Earthquake Focal Mechanism Catalog for Southern California (1981-2010)
A refined earthquake mechanism catalog for southern Califiornia using the HASH method and locations derived from waveform cross-correlation. Each focal mechanism is obtained from grid searching for the best-fitting double-couple focal mechanism solution to both the P-wave first mo...
Blankenship, D. Sandia National Laboratories
Dec 31, 2014
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report
The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The Project chose the Dixie Valley Geothermal System in Nevada as a field laboratory site for methodlogy calibration...
Iovenitti, J. AltaRock Energy Inc
May 15, 2013
15 Resources
0 Stars
Publicly accessible
15 Resources
0 Stars
Publicly accessible
EGS Collab Experiment 1: Earth Model Input Files
The EGS Collab is conducting experiments in hydraulic fracturing at a depth of 1.5 km in the Sanford Underground Research Facility (SURF) on the 4850 Level. A total of eight ~60m-long subhorizontal boreholes were drilled at that depth on the western rib of the West Access Drift. S...
Neupane, G. and Sigma-V, T. Idaho National Laboratory
Dec 19, 2019
6 Resources
0 Stars
Publicly accessible
6 Resources
0 Stars
Publicly accessible
Utah FORGE: Documentation on Discrete Fracture Network and Fracture Propagation Modelling
This dataset includes reports and a slide presentation on discrete fracture network (DFN) generation and hydraulic fracture modeling at the Utah FORGE site. It details the characterization of natural fractures using well log and core data, as well as stochastic modeling techniques...
Sharma, M. and Cao, M. University of Texas
Feb 07, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible