Search OEDI Data

SeaRAY WEC Preliminary Design and Test Planning

The SeaRAY is a deployable power system for maritime sensors, monitoring equipment, communications, unmanned underwater vehicles, and other similar payloads. This project is to design, deliver, and test a prototype low-power WEC that lowers the total cost of ownership and provides...

Hammagren, E. et al Columbia Power Technologies, Inc.

May 18, 2020
4 Resources
0 Stars
Publicly accessible

CalWave Open Water Demo Budget Period 1 Reports

The objective of the project is to advance the Technology Readiness Level (TRL) of the Wave Energy Converter (WEC) developed by CalWave Wave Power Technologies Inc (CalWave) through advanced numerical simulations, dynamic hardware tests, and ultimately a scaled open water demonstr...

Boerner, T. et al CalWave Power Technologies Inc.

Jun 03, 2019
8 Resources
0 Stars
Publicly accessible

TEAMER: Wave Energy Converter SIMulator (WEC-SIM) Support for an Adaptive Wave Energy Converter by Ocean Motion Technologies

Scripts from project git repo + tutorial slide deck generated for the TEAMER RFTS 1 (request for technical support) collaborative project between Ocean Motion Technologies, Inc. and Sandia National Laboratories + National Renewable Energy Laboratory. The project simulates an adapt...

Keester, A. et al Ocean Motion Technologies, Inc.

Jan 29, 2021
4 Resources
0 Stars
Publicly accessible

NWEI Azura June 2018 Data

Data files for the NWEI Azura grid-connected deployment at the 30-meter berth of the US Navy's Wave Energy Test Site (WETS 30m Site) at the Kaneohe Marine Corps Base Hawaii (MCBH) on the windward (northeast) coast of the island of Oahu, HI. See general documentation describing sp...

Lettenmaier, T. Northwest Energy Innovations

Jul 31, 2018
8 Resources
0 Stars
Publicly accessible

NWEI Azura May 2018 Data

Data files for the NWEI Azura grid-connected deployment at the 30-meter berth of the US Navys Wave Energy Test Site (WETS 30m Site) at the Kaneohe Marine Corps Base Hawaii (MCBH) on the windward (northeast) coast of the island of Oahu, HI. See general documentation describing spe...

Lettenmaier, T. Northwest Energy Innovations

Jul 23, 2018
9 Resources
0 Stars
Publicly accessible

PacWave Site Observations

The PacWave Site Observations submission contains raw and near-real-time meteorological and oceanic measurements at the PacWave wave energy test site. PacWave is an open-ocean testing facility operated by Oregon State University, located off the coast of Newport, Oregon. The test ...

Hembrough, B. et al Oregon State University

Jan 01, 2020
4 Resources
0 Stars
Publicly accessible

National Marine Renewable Energy Center Upgrades LUPA

The data provided is part of a power take off damping optimization study. The power take off damping coefficient was swept from 0 to approximately 7000 N/m/s during a single regular wave test with a real time control of the motor/generator. The generated power from the LUPA (Lab U...

Robertson, B. et al Oregon State University

Oct 12, 2022
5 Resources
0 Stars
Publicly accessible

TEAMER: OpenFAST Modeling and Simulation of the Aquantis AQ10 Marine Hydrokinetic Turbine

This dataset was developed under TEAMER technical support (CRD-21-17763-0) to model the Aquantis AQ10, a spar buoy-based marine hydrokinetic turbine, using the OpenFAST simulation framework. The project transitioned modeling from the proprietary Tidal Bladed tool to OpenFAST to en...

Swales, H. and Tran, T. Aquantis, Inc.

Jul 31, 2025
3 Resources
0 Stars
Publicly accessible

TEAMER: Integral Guam Wave Resource Assessment

The data package submitted supports a pre-feasibility wave energy resource assessment for Guam and includes all spatial, modeling, and processing products generated under the TEAMER Post-Access study. The submission consists of a complete GIS dataset compiled during the desktop st...

Staby, B. and Flanary, C. Integral Consulting Inc.

Mar 17, 2026
2 Resources
0 Stars
Publicly accessible

TEAMER: Advanced Wave-to-Wire OWC model in WEC-Sim

Accurate numerical models are crucial for the development of wave energy converter (WEC) technologies, providing the means for power production and lifetime assessment, site selection, and design of mooring lines, PTO systems and controllers, among other aspects. This project aims...

Peñalba, M. et al Mondragon Goi Eskola Politeknikoa

Dec 20, 2024
6 Resources
0 Stars
Publicly accessible

TEAMER: Numerical Modeling and Optimization of the iProTech Pitching Inertial Pump (PIP) Wave Energy Converter (WEC)

This project focused on developing an automated workflow to evaluate and optimize the iProTech Pitching Inertial Pump (PIP) wave energy converter (WEC) using open-source Python packages and the MATLAB/Simulink tool, WEC-Sim. The process involved parameterizing key design variables...

Wynn, N. et al National Renewable Energy Laboratory

Apr 11, 2024
2 Resources
0 Stars
Publicly accessible

TEAMER: Modeling of Wave Energy Converter-augmented Ocergy Offshore Platform Immediate Release Report

In this project, using the MATLAB/Simulink tool, WEC-Sim, initial simulations were performed of Ocergy's offshore data platform, the OCG-Data, to study the feasibility of augmenting this platform with several wave energy converters (WECs) affixed to platform structure. A target of...

Tom, N. et al Ocergy, Inc

Mar 03, 2026
2 Resources
0 Stars
Publicly accessible

HERO WEC V1 Upgrade 2023 Laboratory Testing (processed data)

The following submission includes processed laboratory data from NREL's Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC), in the form of MATLAB workspaces. This dataset was created using NREL's Large Amplitude Motion Platform (LAMP) and collected between Aug...

Panzarella, J. et al National Renewable Energy Laboratory

Jan 01, 2024
12 Resources
0 Stars
Publicly accessible

Techno-Economic Analysis of AquaHarmonics Wave Energy Converter Using SAM: Baseline and Optimized LCOE Estimates

This dataset presents techno-economic modeling results for the AquaHarmonics Wave Energy Converter (WEC), analyzing both baseline and optimized system configurations using the National Renewable Energy Laboratory's System Advisor Model (SAM). The models incorporate empirical perfo...

Hagmüller, A. et al AquaHarmonics, Inc.

Jun 24, 2025
5 Resources
0 Stars
Publicly accessible

TEAMER: xWave ABS Path to Certification Prototype Validation Stage Public Release

This is CalWave's public release report for work conducted under TEAMER RFTS 12 with the American Bureau of Shipping (ABS) on xWave, a submerged pressure differential type Wave Energy Converter (WEC). The project focused on prototype validation within the ABS New Technology Qualif...

Boerner, T. et al CalWave Inc.

Jul 15, 2026
2 Resources
0 Stars
Publicly accessible

TEAMER: Wave and Current Energy Converter Modeling Workshop Materials

This dataset contains the full set of training materials used in a marine hydrokinetic (MHK) modeling workshop conducted by Sandia National Laboratories for the University of Alaska Fairbanks, funded through the U.S. Department of Energy's TEAMER program. The workshop focused on t...

McWilliams, S. et al Sandia National Laboratories

Apr 18, 2025
7 Resources
0 Stars
Publicly accessible

TEAMER: Assessing Structural Integrity of a Self-Reactive Point Absorber Subjected to Extreme Sea Conditions

This submission contains the numerical modeling data and analysis results generated for the structural integrity assessment of a self-reactive two-body point absorber wave energy converter (WEC) designed by the University of Michigan. The dataset includes hydrodynamic outputs from...

Zhang, S. et al University of Michigan

Jul 30, 2025
1 Resources
0 Stars
Publicly accessible

NWEI Azura Technology Demonstration at WETS Final Reports

This submission contains the final scientific and technical report for the Azura technology demonstration at WETS. Also contained are all test reports as referenced in the final report. All test data from this project may be found under 'Related Datasets' on the MHKDR submission page.

Ling, B. et al Northwest Energy Innovations

Jul 01, 2018
18 Resources
0 Stars
Publicly accessible

Additional Data Focused on Phase 1 Geared Toward Computational Fluid Dynamics (CFD) validation

**Overview** A new validation campaign was developed within the Offshore Code Comparison Collaboration, Continued, with Correlation and unCertainty (OC6) to better understand the complex interactions between components of a floating wind system (e.g., columns, pontoons, etc.) in ...

Robertson, A. Wind Energy Technologies Office (WETO)

Apr 08, 2021
1 Resources
0 Stars
Publicly accessible

Laboratory Upgrade Point Absorber (LUPA) CAD Files

The Laboratory Upgrade Point Absorber (LUPA) is an open-source wave energy converter designed and tested by Oregon State University. The computer-aided design (CAD) files are provided here in two forms: the original SOLIDWORKS (2021) model as "LUPA SOLIDWORKS.zip" and as a STEP fi...

Beringer, C. et al Oregon State University

Nov 04, 2024
7 Resources
0 Stars
Publicly accessible

TEAMER: Numerical Modeling of WECs to Support OES Task 10

This submission contains the files for reproducing the waves only and sphere test article simulations for the experimental setup (three different wave conditions) associated with the Teamer Request for Technical Support 9 (RFTS 9) fluid dynamics simulations to support the Ocean En...

Meuris, B. et al Sandia National Laboratories

Sep 23, 2024
4 Resources
0 Stars
Publicly accessible

Wind Turbine Gearbox Condition Monitoring Vibration Analysis Benchmarking Datasets

Wind turbine condition monitoring (CM) can potentially help the wind industry reduce turbine downtime and operation and maintenance (O&M) cost. NREL CM research has investigated various condition-monitoring techniques such as acoustic emission (AE specifically stress wave), vibrat...

Sheng, S. National Renewable Energy Laboratory

Mar 28, 2014
5 Resources
2 Stars
Publicly accessible

TEAMER: MADWEC Techno-Economic Analysis

The objective of this project was for the facility to conduct a techno-economic assessment (TEA) of the Maximal Asymmetric Drag Wave Energy Converter (MADWEC), developed by the University of Massachusetts Dartmouth (UMass Dartmouth). MADWEC is used for powering remote monitoring a...

Ortega, T. and Baca, E. National Renewable Energy Laboratory

Mar 08, 2024
2 Resources
0 Stars
Publicly accessible

StingRAY Structural Optimization Final Technical Report

The overall project objective is to materially decrease the leveled cost of energy (LCOE) of the Columbia Power (CPower) StingRAY utility-scale wave energy converter (WEC). This will be achieved by reducing structural material and manufacturing costs and increasing energy output. ...

Lenee-Bluhm, P. Columbia Power Technologies, Inc.

Aug 05, 2020
2 Resources
0 Stars
Publicly accessible

H3 StingRAY Final Design and Technical Report

The goal of this Project was to develop a standards-compliant, fabrication-ready design of Columbia Power Technologies' (C-Power) next-generation wave energy converter (WEC), the StingRAY H3. The H3 is a design iteration of C-Power's StingRAY WEC and is intended for electrical pow...

Prudell, J. and Lenee-Bluhm, P. Columbia Power Technologies, Inc.

Sep 15, 2023
2 Resources
0 Stars
Publicly accessible

<< Previous 3 4 5 6 7 8 9 10 11 12 Next >>