Search OEDI Data

Modeling Responses of Naturally Fractured Geothermal Reservoir to Low-Pressure Stimulation

Hydraulic shearing is an appealing reservoir stimulation strategy for Enhanced Geothermal Systems. It is believed that hydro-shearing is likely to simulate a fracture network that covers a relatively large volume of the reservoir whereas hydro-fracturing tends to create a small nu...

Fu, P. and Carrigan, C. Lawrence Livermore National Laboratory

Jan 01, 2012
2 Resources
0 Stars
Publicly accessible

Shear Induced Permeability Test: Stripa Granite Temperature Pressure and Displacement Data

Spreadsheet containing the raw measured data, calibrated data, and brief explanation of data for Test1 Stripa Granite Geomechanical/Geochemical Test. Stress on fracture ~20.7 MPa.

Kneafsey, T. Lawrence Berkeley National Laboratory

Jun 21, 2014
1 Resources
0 Stars
Publicly accessible

Geologic Map of the Neal Hot Springs Geothermal Area GIS Data

Neal Hot Springs-ESRI Geodatabase (ArcGeology v1.3): Contains all the geologic map data, including faults, contacts, folds, unit polygons, and attitudes of strata and faults. List of stratigraphic units and stratigraphic correlation diagram. Three cross-sections. Locations of ...

E., J. University of Nevada

Mar 31, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Meteorological Data During 2024 Stimulation

This preliminary data archive includes meteorological data recorded at the Utah FORGE facility over the period of time including the 16A/16B stimulation activities, largely March/April/May of 2024. This information may prove useful for understanding seismic and other instrumentati...

Ajo-Franklin, J. Rice University

May 09, 2024
5 Resources
0 Stars
Publicly accessible

Utah FORGE 2439: Report on Minifrac Tests for Stress Characterization

This report describes minifrac tests conducted in the 16B(78)-32 well at the Utah FORGE site to characterize subsurface stresses, including the magnitude and orientation of the minimum and maximum horizontal stresses and the magnitude of the vertical stress. A minifrac test was co...

Kelley, M. et al Battelle Memorial Institute

Feb 22, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Wells 16A(78)-32 and 16B(78)-32 Extended Circulation Test Data August and September 2024

The dataset includes data collected during an extended circulation test conducted at the Utah FORGE site between August 8 and September 5, 2024. It provides uncorrected, raw digital data from the test, along with calibration information and a final report detailing the test proced...

McLennan, J. et al Energy and Geoscience Institute at the University of Utah

Oct 11, 2024
1 Resources
0 Stars
Publicly accessible

Geocellular model of St. Peter Sandstone for University of Illinois at Urbana-Champaign DDU Feasibility Study

The geocellular model of the St. Peter Sandstone was constructed for the University of Illinois at Urbana-Champaign DDU feasibility study. Starting with the initial area of review (18.0 km by 18.1 km [11.2 miles by 11.3 miles]) the boundaries of the model were trimmed down to 9.7 ...

Damico, J. University of Illinois

Dec 31, 2018
5 Resources
0 Stars
Publicly accessible

Geocellular Model of Mt. Simon Sandstone for University of Illinois at Urbana-Champaign DDU feasibility study

The geocellular model of the Mt. Simon Sandstone was constructed for the University of Illinois at Urbana-Champaign DDU feasibility study. Starting with the initial area of review (18.0 km by 18.1 km [11.2 miles by 11.3 miles]) the boundaries of the model were trimmed down to 9.7 ...

Damico, J. University of Illinois

Dec 31, 2018
4 Resources
0 Stars
Publicly accessible

3D Model of the San Emidio Geothermal Area

The San Emidio geothermal system is characterized by a left-step in a west-dipping normal fault system that bounds the western side of the Lake Range. The 3D geologic model consists of 5 geologic units and 55 faults. Overlying Jurrassic-Triassic metasedimentary basement is a ~500 ...

E., J. University of Nevada

Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Triaxial Direct Shear Results

This submission contains a report and associated data from triaxial direct shear tests conducted by Los Alamos National Laboratory. The samples used were sourced from 16A(78)-32 well core. The primary objectives of this test were to determine the shear strength in both intact an...

Frash, L. et al Los Alamos National Laboratory

Aug 14, 2023
2 Resources
0 Stars
Publicly accessible

Altona Field Lab Inverse Model WRR 2020

Includes data for measured inert tracer breakthrough curves first reported in Hawkins (2020) (Water Resources Research). In addition, this submission includes the production well temperature measurements first reported in Hawkins et al. (2017a) (Water Resources Research, volume 53...

Tester, J. Cornell University

Jan 01, 2015
3 Resources
0 Stars
Publicly accessible

Utah FORGE: QuantumPro Well 16A(78)-32 and 16B(78)-32 Stimulation and Circulation Tracer Test Results 2024

This dataset includes results and supporting documentation from tracer tests conducted in 2024 at Utah FORGE. The tests involved injecting nanoparticle tracers into injection well 16A(78)-32 and monitoring their recovery in production well 16B(78)-32 to assess hydraulic connectivi...

Guo, Q. et al QuantumPro Inc.

Jan 07, 1970
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2446: Closing the Loop Between In-Situ Stress Complexity and EGS Fracture Complexity 2024 Annual Workshop Presentation

This is a presentation on Closing the Loop Between In-Situ Stress Complexity and EGS Fracture Complexity by Lawrence Livermore National Laboratory, presented by Matteo Cusini. The video discusses the combination of high-fidelity simulations and true-triaxial block fracturing tests...

Cusini, M. et al Energy and Geoscience Institute at the University of Utah

Aug 26, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: 16B(78)-32 RFS DSS Strain Change Rate vs. Depth During 16A(78)-32 Stimulation

This dataset contains strain change rate versus depth data acquired using a Rayleigh frequency shift (RFS) distributed strain sensing (DSS) system during hydraulic stimulation of well 16A(78)-32 at the Utah FORGE site in April 2024. The data were collected from an optical fiber in...

Jurick, D. et al Neubrex Energy Services (US), LLC

Mar 02, 2025
1 Resources
0 Stars
Publicly accessible

Numerical Modeling for Hydraulic Fracture Prediction

Numerical modeling on fused silica cylindrical materials for predicting overpressures required to fracture an homogeneous pure (surrogate) material with known mechanical properties similar to igneous rock materials and later compare these values to experimental overpressures obtai...

Gupta, V. Pacific Northwest National Laboratory

Apr 26, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Stimulation Data (April, 2022)

This is a set of data related to the stimulation program at Utah FORGE well 16A(78)-32 during April, 2022. This includes daily reports, 1 second Pason data, tracer data, and shear stimulation data and information including a report of an evolving prognosis for the stimulation oper...

McLennan, J. Energy and Geoscience Institute at the University of Utah

May 18, 2022
11 Resources
0 Stars
Publicly accessible

Utah FORGE: Logs and Data from Deep Well 58-32 (MU-ESW1)

Data, logs, and graphics associated with the drilling and testing of Utah FORGE deep test well 58-32 (MU-ESW1) near Roosevelt Hot Springs.

Nash, G. and Moore, J. Energy and Geoscience Institute at the University of Utah

Apr 11, 2018
11 Resources
0 Stars
Publicly accessible

Utah FORGE 1-2551: Development of a Multi-Stage Fracturing System and Wellbore Tractor 2024 Annual Workshop Presentation

This is a presentation on the Development of a Multi-Stage Fracturing System and Wellbore Tractor by Colorado School of Mines, presented by William Fleckenstein. This video describes (1) the development and use of a low-cost and rapid multistage fracture stimulation technology wit...

Fleckenstein, W. Energy and Geoscience Institute at the University of Utah

Jan 13, 1970
1 Resources
0 Stars
Publicly accessible

HT Flash and Tantalum Capacitor Report

Pushing the boundaries with geothermal tool development can often necessitate exceeding manufacturer specifications for temperature and pressure of individual circuit components. Detailed here are the efforts surrounding geothermal temperature characterization of commercially avai...

Cashion, A. and Cieslewski, G. Sandia National Laboratories

Oct 28, 2015
1 Resources
0 Stars
Publicly accessible

High-Pressure and High-Temperature (HPHT) Lost Circulation Material (LCM) Testing

High-pressure and high-temperature (HPHT) lost circulation material (LCM) rheology test results, LCM particle size distributions (PSD) analysis, and HPHT LCM fluid loss test results. Three academic papers / reports derived from this research are also presented.

Salehi, S. and Vivas, C. University of Oklahoma

Nov 30, 2021
6 Resources
0 Stars
Publicly accessible

Understanding Constraints on Geothermal Sustainability Through Reservoir Characterization at Brady Geothermal Field, Nevada

The vast supply of geothermal energy stored throughout the Earth and the exceedingly long time required to dissipate that energy makes the world's geothermal energy supply nearly limitless. As such, this resource holds the potential to provide a large supply of the world's energy ...

Patterson, J. University of Wisconsin

Jul 11, 2018
1 Resources
0 Stars
Publicly accessible

Operational Performance Requirements For Motor Power Sections Used in Geothermal Drilling Based Upon Minimum Specific Energy

Operational performance requirements are needed to support development of specifications for downhole motor power sections to be used for drilling hard rock during geothermal wellbore construction. Theoretical torque specifications are derived based upon a widely-accepted rock-re...

Raymond, D. Sandia National Laboratories

Sep 10, 2014
1 Resources
0 Stars
Publicly accessible

Utah FORGE: 2023 Phase 3B Year 1 Annual Report

This report discusses the objectives, goals, accomplishments and results of Phase 3B Year 1 of the Utah FORGE project. The report includes infrastructure, seismic monitoring, modelling, external R&D, communications and outreach, data produced, lessons learned, conclusions, and pla...

Moore, J. et al Energy and Geoscience Institute at the University of Utah

Aug 09, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Fiber-Optic Geophysical Monitoring of Reservoir Evolution Workshop Presentation

This is a presentation on the Fiber-Optic Geophysical Monitoring of Reservoir Evolution at the Utah FORGE Milford Site project by Rice University, presented by Prof. Jonathan Ajo-Franklin. The project's objective was to develop an end-to-end fiber-optic sensing approach for EGS to...

Ajo-Franklin, J. et al Rice University

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Core Analysis Results

This dataset features petrographic, X-Ray Diffraction (XRD), and Scanning Electron Microscopy Analyses of core samples from well 16A(78)-32, which serves as the injection well for the Utah FORGE Enhanced Geothermal System (EGS) project. In addition to an overview of the analysis,...

Jones, C. et al Energy and Geoscience Institute at the University of Utah

Sep 22, 2023
1 Resources
0 Stars
Publicly accessible

<< Previous 2 3 4 5 6 7 8 9 10 11 Next >>