Search OEDI Data

Utah FORGE: Stress Logging Data

This spreadsheet consist of data and graphs from deep well 58-32 stress testing from 6900 7500 ft depth. Measured stress data were used to correct logging predictions of in situ stress. Stress plots shows pore pressure (measured during the injection testing), the total vertical in...

McLennan, J. Energy and Geoscience Institute at the University of Utah

Mar 14, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Composite 3D Seismic Velocity Model

This is a composite 3D seismic velocity that was constructed from compiled information from several local studies regarding seismic velocities and structural information. This seismic velocity model is provided in NonLinLoc format (slow_len), which is readily usable in NonLinLoc ...

Finger, C. et al University of Utah Seismograph Stations

Feb 09, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Stage 1 Pressure Falloff Analysis

This is an analysis of the pressure falloff in stage 1 fracture stimulation of FORGE well 16A(78)-32. The objective of this research is to understand the information content of the well stimulation data of FORGE Well 16A(78)-32. The Stage 1 step-rate test, a variant of the classic...

Kazemi, H. et al Colorado School of Mines

Aug 04, 2022
1 Resources
0 Stars
Publicly accessible

Stanford Thermal Earth Model for the Conterminous United States

Provided here are various forms of the Stanford Thermal Earth Model, as well as the data and methods used for its creation. The predictions produced by this model were visualized in two-dimensional spatial maps across the modeled depths (0-7 km) for the conterminous United States....

Aljubran, M. and Horne, R. Stanford University

Mar 14, 2024
9 Resources
0 Stars
Publicly accessible

Brady Geothermal 1D Seismic Velocity Model

This submission contains an ASCII text file of seismic velocities derived from ambient noise cross-correlation used to create a model of seismic velocity as a 1-D function of depth in addition to a quarterly report describing the creation and use of the model. Model uses 28 Green'...

Matzel, E. Lawrence Livermore National Laboratory

Feb 17, 2015
2 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Preliminary Report on Development of a Reservoir Seismic Velocity Model

This report describes the development of a preliminary 3D seismic velocity model at the Utah FORGE site and first results from estimating seismic resolution in the generated fracture volume during Stage 3 of the April 2022 stimulation. A preliminary 3D velocity model for the larg...

Gritto, R. Array Information Technology

Jan 30, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Hydrothermal Friction-Hydraulic Transmissivity Laboratory Experiments

Submission includes data from laboratory slide-hold-slide tests, combined with flow through tests, conducted on Westerly granite with 30 degree sawcut. Tests were conducted with a constant confining pressure of 30 MPa with an average pore pressure of 10 MPa at temperatures of 23 a...

Jeppson, T. and Lockner, D. United States Geological Survey

Feb 24, 2022
1 Resources
0 Stars
Publicly accessible

Subsurface Characterization and Machine Learning Predictions at Brady Hot Springs Results

Geothermal power plants typically show decreasing heat and power production rates over time. Mitigation strategies include optimizing the management of existing wells increasing or decreasing the fluid flow rates across the wells and drilling new wells at appropriate locations. Th...

Beckers, K. et al National Renewable Energy Laboratory

Oct 20, 2021
6 Resources
0 Stars
Publicly accessible

SMP Preparation, Programming, and Characterization

The problem of loss circulation in geothermal wells is inherently challenging due to high temperatures, brittle rocks, and presence of abundant fractures. Because of the inherent challenges in geothermal environments, there are limitations in selecting proper lost circulation mate...

Salehi, S. et al University of Oklahoma

Oct 01, 2021
4 Resources
0 Stars
Publicly accessible

Newberry Caldera Conceptual Geologic Model

Conceptual model for the Newberry Caldera geothermal area. Model is centered around caldera and evaluates geologic information in tandem with some geophysical datasets to derive a conceptual subsurface model. Includes: Geologic information from the USGS geologic map of Newberry...

Moser, M. et al National Energy Technology Laboratory

Mar 04, 2016
1 Resources
0 Stars
Publicly accessible

GeoVision: Harnessing the Heat Beneath Our Feet Analysis Inputs and Results

This submission includes input and results data from analysis done as part of the Geothermal Technology Office's Geothermal Vision Study (GeoVision). The submission includes data for both analysis of the electricity sector and the heating and cooling sector. For the electricity se...

Geothermal Technologies Office, U. National Renewable Energy Laboratory

Sep 30, 2019
16 Resources
0 Stars
Publicly accessible

Newberry Caldera Conceptual Geophysical Model

Conceptual model for the Newberry Caldera geothermal area. Model is centered around caldera and evaluates multiple geophysical datasets to derive a conceptual subsurface model. Includes: Conductor layer based on transient electromagnetic data from Fitterman et al., 1988 (figure...

Moser, M. et al National Energy Technology Laboratory

Mar 04, 2016
1 Resources
0 Stars
Publicly accessible

Training dataset and results for geothermal exploration artificial intelligence, applied to Brady Hot Springs and Desert Peak

The submission includes the labeled datasets, as ESRI Grid files (.gri, .grd) used for training and classification results for our machine leaning model: brady_som_output.gri, brady_som_output.grd, brady_som_output.* desert_som_output.gri, desert_som_output.grd, desert_som_outpu...

Moraga, J. et al Colorado School of Mines

Sep 01, 2020
16 Resources
0 Stars
Publicly accessible

Washington Geothermal Play Fairway Analysis Heat, Permeability, and Fracture Model Data

This submission contains raster and vector data for the entire state of Washington, with specific emphasis on the three geothermal play fairway sites: Mount St. Helens seismic zone (MSHSZ), Wind River valley (WRV), and Mount Baker (MB). Data are provided for 3 major geothermal mo...

Steely, A. et al Washington Geological Survey

Dec 07, 2017
9 Resources
0 Stars
Publicly accessible

Utah FORGE: Triaxial Direct Shear Results

This submission contains a report and associated data from triaxial direct shear tests conducted by Los Alamos National Laboratory. The samples used were sourced from 16A(78)-32 well core. The primary objectives of this test were to determine the shear strength in both intact an...

Frash, L. et al Los Alamos National Laboratory

Aug 14, 2023
2 Resources
0 Stars
Publicly accessible

Life Cycle Water Consumption and Water Resource Assessment for Utility-Scale Geothermal Systems: An In-Depth Analysis of Historical and Forthcoming EGS Projects

This report is the third in a series of reports sponsored by the U.S. Department of Energy Geothermal Technologies Program in which a range of water-related issues surrounding geothermal power production are evaluated. The first report made an initial attempt at quantifying the li...

Schroeder, J. et al Argonne National Laboratory

Aug 31, 2013
11 Resources
0 Stars
Publicly accessible

Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report

The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The Project chose the Dixie Valley Geothermal System in Nevada as a field laboratory site for methodlogy calibration...

Iovenitti, J. AltaRock Energy Inc

May 15, 2013
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Development of a Reservoir Seismic Velocity Model and Seismic Resolution Study

This is data from and a final report on the development of a 3D velocity model for the larger FORGE area and on the seismic resolution in the stimulated fracture volume at the bottom of well 16A-32. The velocity model was developed using RMS velocities of the seismic reflection su...

Vasco, D. and Chan, C. Array Information Technology

Apr 30, 2022
2 Resources
0 Stars
Publicly accessible

Fallon FORGE: 3D Geologic Model

An x,y,z scattered data file for the 3D geologic model of the Fallon FORGE site. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding al...

Blankenship, D. Sandia National Laboratories

Mar 01, 2016
1 Resources
0 Stars
Publicly accessible

University of Illinois Campus Deep Direct-Use Feasibility Study Preliminary Geothermal Reservoir Model

Preliminary geothermal reservoir simulations were performed using a homogeneous static model to evaluate and understand the effects of fluid and rock properties that could influence the delivery of thermal energy in a doublet system. A 5000 feet by 5100 feet by 500 feet homogeneou...

Okwen, R. University of Illinois

May 08, 2018
4 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: 3D Geologic Model

This is an x,y,z file of the West Flank FORGE 3D geologic model. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding algorithm. The da...

Blankenship, D. Sandia National Laboratories

Mar 01, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Slide-Hold-Slide Experiments on Westerly Granite at Temperatures up to 250 Degrees C

Laboratory slide-hold-slide tests were conducted in a conventional triaxial deformation configuration on 1-inch diameter cylindrical cores of Westerly granite bisected by a sawcut oriented at 30 degrees from vertical. Tests were conducted at a constant confining pressure of 30 MPa...

Jeppson, T. et al United States Geological Survey

Oct 10, 2023
2 Resources
0 Stars
Publicly accessible

Foam Fracturing Fluid Half-life Experimental Data

Foam thermal stability was studies at Temple University in collaboration with Oak Ridge National Lab (ORNL). The goal of this project is to explore thermally stable foams as hydrofracking fluid media for potential applications in enhanced geothermal system (EGS). Data generated fr...

Thakor, V. et al Temple University

May 20, 2022
1 Resources
0 Stars
Publicly accessible

Three Dimensional Thermal Model of Newberry Volcano, Oregon

Final results of a 3D finite difference thermal model of Newberry Volcano, Oregon. Model data are formatted as a text file with four data columns (X, Y, Z, T). X and Y coordinates are in UTM (NAD83 Zone 10N), Z is elevation from mean sea level (meters), T is temperature in deg C. ...

Frone, Z. and Cladouhos, T. AltaRock Energy Inc

Jan 30, 2015
3 Resources
0 Stars
Publicly accessible

DEEPEN Leapfrog Geodata Model Cleaned and Reformatted Exploration Datasets from Newberry Volcano

DEEPEN stands for DE-risking Exploration of geothermal Plays in magmatic ENvironments. As part of the DEEPEN 3D play fairway analysis (PFA) conducted at Newberry Volcano for multiple play types (conventional hydrothermal, superhot EGS, and supercritical), existing geoscientific e...

Pauling, H. et al National Renewable Energy Laboratory

Jun 30, 2023
22 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>