Search OEDI Data

Utah FORGE 5-2557: Role of Fluid and Temperature in Fracture Mechanics and Couples THMC Processes for Enhanced Geothermal Systems 2024 Annual Workshop Presentation

This is a presentation on the Role of Fluid and Temperature in Fracture Mechanics and Couples THMC Processes for Enhanced Geothermal Systems by Purdue University, presented by Laura Pyrak-Nolte. This video slide presentation describes the development and validation of a macroscopi...

Pyrak-Nolte, L. Energy and Geoscience Institute at the University of Utah

Aug 13, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Native State Model 2022 Update

This is the Phase 3 native state model update. The Phase 3 numerical model represents a significant subsurface volume below the FORGE site footprint. The model domain of 4.0 km x 4.0 km x 4.2 km is located approximately between depths of 4000 to 4200 meters below land surface. Thi...

Podgorney, R. and Liu, R. Idaho National Laboratory

Jul 29, 2022
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Optimization of a Plug-and-Perf Stimulation (Fervo Energy)

Information around the plug-and-perf treatment design at Utah FORGE by Fervo Energy. Objective and Purpose: Develop a multistage hydraulic stimulation approach designed specifically to target the top three factors that control the technical and commercial viability of an EGS sys...

Norbeck, J. et al Fervo Energy

Feb 08, 2023
3 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Continuous Active-Source Seismic Monitoring (CASSM) Data

The U.S. Department of Energy's Enhanced Geothermal System (EGS) Collab project aims to improve our understanding of hydraulic stimulations in crystalline rock for enhanced geothermal energy production through execution of intensely monitored meso-scale experiments. The first expe...

Schoenball, M. and Sprinkle, P. Lawrence Berkeley National Laboratory

Apr 25, 2018
6 Resources
0 Stars
Publicly accessible

Resource Analysis for Deep Direct-Use Feasibility Study in East Texas

The National Renewable Energy Laboratory, Southern Methodist University Geothermal Laboratory, Eastman Chemical, Turbine Air Systems, and the Electric Power Research Institute are evaluating the feasibility of using geothermal heat to improve the efficiency of natural gas power pl...

Richards, M. et al Southern Methodist University

Jun 28, 2018
13 Resources
0 Stars
Publicly accessible

Development of a Downhole Tracer and pH Measurement Instrument for Application in Geothermal Wells

Due the high temperature and pressure conditions found in geothermal wells, tracer studies designed to elucidate properties of geothermal reservoirs are traditionally conducted by pulling liquid samples from the wellhead. These samples are then sent off for analysis in a fixed lab...

Hess, R. et al Sandia National Laboratories

Sep 11, 2013
1 Resources
0 Stars
Publicly accessible

Geothermal Exploration of Newberry Volcano, Oregon Summary Report

Abstract: Davenport Newberry (Davenport) has completed 8 years of exploration for geothermal energy on Newberry Volcano in central Oregon. Two deep exploration test wells were drilled by Davenport on the west flank of the volcano, one intersected a hydrothermal system; the other ...

Waibel, A. et al Southern Methodist University

Jan 01, 2015
1 Resources
0 Stars
Publicly accessible

Utah FORGE 1-2551: Development of a Multi-Stage Fracturing System and Wellbore Tractor 2024 Annual Workshop Presentation

This is a presentation on the Development of a Multi-Stage Fracturing System and Wellbore Tractor by Colorado School of Mines, presented by William Fleckenstein. This video describes (1) the development and use of a low-cost and rapid multistage fracture stimulation technology wit...

Fleckenstein, W. Energy and Geoscience Institute at the University of Utah

Jan 13, 1970
1 Resources
0 Stars
Publicly accessible

Topographic and Air-Photo Lineaments in Various Locations Related to Geothermal Exploration in Colorado

These line shapefiles trace apparent topographic and air-photo lineaments in various counties in Colorado. It was made in order to identify possible fault and fracture systems that might be conduits for geothermal fluids, as part of a DOE reconnaissance geothermal exploration prog...

Zehner, R. Flint Geothermal, LLC

Feb 01, 2012
11 Resources
0 Stars
Publicly accessible

Salton Sea Fluid Inclusion Gas Analysis

Fluid inclusion gas analysis for wells in Salton Sea geothermal area, California. Analyses used in developing fluid inclusion stratigraphy for wells and defining fluids across the geothermal fields. Each sample has mass spectrum counts for 180 chemical species.

Dilley, L. Hattenburg Dilley and Linnell

Jan 01, 2013
7 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Joint Imaging of Fracture Growth and Estimation of Fracture Properties During EGS Development 2024 Annual Workshop Presentation

This is a presentation on the Joint Electromagnetic/Seismic/InSAR Imaging of Spatial-Temporal Fracture Growth and Estimation of Physical Fracture Properties During EGS Resource Development by Lawrence Berkeley National Laboratory, presented by David Alumbaugh. This is a video pres...

Alumbaugh, D. Energy and Geoscience Institute at the University of Utah

Aug 25, 2024
1 Resources
0 Stars
Publicly accessible

Material Properties for Brady Hot Springs Nevada USA from PoroTomo Project

The PoroTomo team has completed inverse modeling of the three data sets (seismology, geodesy, and hydrology) individually, as described previously. The estimated values of the material properties are registered on a three-dimensional grid with a spacing of 25 meters between nodes....

Feigl, K. and PoroTomo Team, . University of Wisconsin

Mar 06, 2019
10 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 (MU-ESW1) FMI Log Fracture Results

A Schlumberger Fullbore Formation Micro-Imager (FMI) log was run from 7390 feet to 7527 feet depth in well 58-32, originally known as well MU-ESW1. Well 58-32 was completed in 2017 as part of Utah FORGE Phase 2. It reached a depth of 7536 feet and recorded a bottom hole temperatur...

BLOCHOWICZ, A. Energy and Geoscience Institute at the University of Utah

Mar 06, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Core Photos

Images of core samples collected from Utah FORGE well 16A(78)-32. These images were created by stitching together multiple photographs resulting in a circumferential view of the cores exterior in two dimensions. Core footages (measured depths) are indicated in the file names, and ...

Jones, C. Energy and Geoscience Institute at the University of Utah

Aug 11, 2021
1 Resources
0 Stars
Publicly accessible

StimuFrac Compressibility as a Function of CO2 Molar Fraction

Compressibility values were obtained in a range of pressures at 250degC by employing a fixed volume view cell completely filled with PAA aqueous solution and injecting CO2 at constant flow rate (0.3mL/min). Pressure increase as a function of supercritical CO2 (scCO2) mass fraction...

A., C. Pacific Northwest National Laboratory

Apr 29, 2016
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Wireline Geophysical Well Logs

This is the full wireline geophysical datasets for characterization of the EGS Collab Experiment #1 testbed on the 4850 level. A metadata file is included within the dataset explaining the logs, fracture picks, etc. Eight boreholes were drilled for this testbed and each one was lo...

Schwering, P. Lawrence Berkeley National Laboratory

Jan 08, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Report on Geodetic Observations of Fracture Development During April 2024 Stimulations

This report presents geodetic observations from the April 2024 stimulations at the Utah FORGE site, as part of LBNL FORGE Project 3-2535. It focuses on Distributed Strain Sensing (DSS) data from an optical fiber in well 16B, capturing localized strain linked to fracture propagatio...

Vasco, D. et al Lawrence Berkeley National Laboratory

Apr 28, 2025
1 Resources
0 Stars
Publicly accessible

Testing for Controlled Rapid Pressurization

Borehole W1 is a NQ core hole drilled at our test site in Socorro. The rock is rhyolite. Borehole W1 which was used to test gas-gas explosive mixtures is 55 feet deep with casing (pinkish in the drawing) set to 35 feet. The model is a representation of the borehole and the hol...

Knudsen, S. Sandia National Laboratories

Sep 03, 2014
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Accelerometer orientations

Document describing the methodology used to determine the accelerometers' three-component orientations at the first EGS Collab testbed using Continuous Active-Source Seismic Monitoring (CASSM) data and hodogram analysis. Original submission: gdr.openei.org/submissions/1166

Hopp, C. et al Lawrence Berkeley National Laboratory

Aug 19, 2020
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Wells 16A(78)-32 and 16B(78)-32 Stimulation Program Report May 2024

This dataset consists of a comprehensive report documenting the stimulation program conducted in May 2024 on Utah FORGE wells 16A(78)-32 and 16B(78)-32. It includes detailed accounts of operational and scientific objectives, stimulation methodologies, and testing outcomes. The rep...

McClennan, J. et al Energy and Geoscience Institute at the University of Utah

Nov 19, 2024
1 Resources
0 Stars
Publicly accessible

GEISER Project The Geysers Seismic Broadband Data 2012 2013

This link points to the Northern California Earthquake Data Center (NCEDC) to access The Geysers seismic broadband data. The two available data sets consist of continuous waveform data recorded at The Geysers from July 2012 to July 2013 and a processed catalog with earthquake info...

Gritto, R. Array Information Technology

Oct 31, 2018
2 Resources
0 Stars
Publicly accessible

Altona Field Lab Inverse Model WRR 2020

Includes data for measured inert tracer breakthrough curves first reported in Hawkins (2020) (Water Resources Research). In addition, this submission includes the production well temperature measurements first reported in Hawkins et al. (2017a) (Water Resources Research, volume 53...

Tester, J. Cornell University

Jan 01, 2015
3 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Wireline Geophysical Well Logs

This is the full wireline geophysical datasets for characterization of the EGS Collab Experiment #2 testbed. A metadata fill is included within the dataset explaining the logs, fracture picks, etc. Eleven boreholes were drilled for this testbed and each one was logged with north s...

Ulrich, C. and Schwering, P. Lawrence Berkeley National Laboratory

Jul 09, 2019
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Core Analyses

This dataset contains final reports regarding stress measurements, permeability measurements, and mechanical properties from the core testing of well 58-32, in PDF format, and spreadsheets containing tables from the reports as part of Utah FORGE Phase 2B. Please refer to the repor...

McLennan, J. Energy and Geoscience Institute at the University of Utah

May 30, 2018
1 Resources
0 Stars
Publicly accessible

Fort Bliss Geothermal Area Data: Temperature Profile, Logs, Schematic Model and Cross Section

This dataset contains a variety of data about the Fort Bliss geothermal area, part of the southern portion of the Tularosa Basin, New Mexico. The dataset contains schematic models for the McGregor Geothermal System, a shallow temperature survey of the Fort Bliss geothermal area. ...

Brandt, A. University of Utah

Nov 15, 2015
14 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 7 8 9 Next >>