Search OEDI Data

Utah FORGE: Pump and Probe Test on an Intact Westerly Granite Sample

This dataset contains results from a pump and probe experiment conducted on an intact Westerly Granite sample with a diameter of 1 inch and a height of 1 3/8 inches. The experiment was performed within an aluminum triaxial pressure vessel (TEMCO) to investigate the non-linear acou...

Klinghammer, H. et al Pennsylvania State University

May 21, 2024
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Pump and Probe Test on a Mated Fracture Westerly Granite Sample

This dataset contains results from a pump and probe experiment conducted on a mated fracture Westerly Granite sample with a diameter of 1 inch and a height of 2 7/8 inches. The experiment was performed within an aluminum triaxial pressure vessel (TEMCO) to investigate the non-line...

Klinghammer, H. et al Pennsylvania State University

May 19, 2024
4 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Hydraulic Pressure Test Results

The EGS Collab experiment 2 was focused on testing shear stimulation techniques. Shear stimulation, in this case, means using hydraulic pressure to cause shear slip on preexisting fracture or fault planes such that the hydraulic conductivity of the fracture or fault increases. The...

Burghardt, J. et al Lawrence Berkeley National Laboratory

Feb 17, 2023
1 Resources
0 Stars
Publicly accessible

kISMET Final Report and Highlights

The files in this submission describes the results of a series of stress measurement and hydraulic fracturing experiments conducted at the Sanford Underground Research Facility (SURF) in Lead, SD. This report describes the accomplishments of the kISMET (permeability (k) and Induce...

Oldenburg, C. et al Lawrence Berkeley National Laboratory

Oct 31, 2016
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Seismic Risk Trafic Light System Version 2

The report outlines the updated Traffic Light System (TLS) for the Utah FORGE project, which aims to mitigate seismic risks associated with Enhanced Geothermal Systems (EGS) operations. It integrates lessons from past operations, including stimulation and circulation experiments a...

Pankow, K. et al University of Utah Seismograph Stations

Jan 24, 2025
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Injection Test Data

This submission contains pressure and flow time series data from the reservoir testing of Well 58-32. These activities were part of the Utah FORGE Phase 2B site suitability confirmatory testing.

Podgorney, R. and McLennan, J. Idaho National Laboratory

Dec 07, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Stimulation Data

Pressure, temperature, and flow data from open-hole, upper perforation, and lower perforation well stimulations gathered from various tools collected at well 58-32 during phase 2C.

Best, S. Geothermal Resource Group

Apr 20, 2019
16 Resources
0 Stars
Publicly accessible

Utah FORGE: Data for 3-D Model Development Lithology, Temperature, Pressure, and Stress

This submission comprises two downloadable .zip archives. Each archive contains spreadsheets with 3-D data and a .txt document describing the data. The Mesh Files .zip download contains data regarding the lithologic contacts of the granitoid and overlying sedimentary basin fill. T...

Podgorney, R. Idaho National Laboratory

Mar 17, 2020
2 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Fiber-Optic Geophysical Monitoring of Reservoir Evolution Workshop Presentation

This is a presentation on the Fiber-Optic Geophysical Monitoring of Reservoir Evolution at the Utah FORGE Milford Site project by Rice University, presented by Prof. Jonathan Ajo-Franklin. The project's objective was to develop an end-to-end fiber-optic sensing approach for EGS to...

Ajo-Franklin, J. et al Rice University

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Optimization of a Plug-and-Perf Stimulation (Fervo Energy)

Information around the plug-and-perf treatment design at Utah FORGE by Fervo Energy. Objective and Purpose: Develop a multistage hydraulic stimulation approach designed specifically to target the top three factors that control the technical and commercial viability of an EGS sys...

Norbeck, J. et al Fervo Energy

Feb 08, 2023
3 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Continuous Active-Source Seismic Monitoring (CASSM) Data

The U.S. Department of Energy's Enhanced Geothermal System (EGS) Collab project aims to improve our understanding of hydraulic stimulations in crystalline rock for enhanced geothermal energy production through execution of intensely monitored meso-scale experiments. The first expe...

Schoenball, M. and Sprinkle, P. Lawrence Berkeley National Laboratory

Apr 25, 2018
6 Resources
0 Stars
Publicly accessible

Brady Well Coordinates and Observation Sensor Depths

Contains metadata associated with the wells used in the 2016 Spring Campaign led partially by UW Madison, LBNL, and LLNL scientists. Included with the well coordinates are the depths to the pressure sensors used in observation and pumping wells. Read me files are included for each...

Lim, D. University of Wisconsin

Mar 13, 2016
4 Resources
0 Stars
Publicly accessible

Foam Fracturing Study for Stimulation Development of Enhanced Geothermal Systems

This is a final technical report for the project: Foam Fracturing Study for Stimulation Development of Enhanced Geothermal Systems (EGS). The goal is to demonstrate the feasibility of foam fracturing in EGS applications. The project, led by Oak Ridge National Laboratory (ORNL), wa...

Wang, H. et al Oak Ridge National Laboratory

May 17, 2022
3 Resources
0 Stars
Publicly accessible

Analyzed Boise Data for Oscillatory Hydraulic Tomography

Data here has been "pre-processed" and "analyzed" from the raw data submitted to the GDR previously (raw data files found at http://gdr.openei.org/submissions/479. doi:10.15121/1176944 after 30 September 2017). First, we submit .mat files which are the "pre-processed" data (must h...

Lim, D. University of Wisconsin

Jul 01, 2015
8 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase Native State FALCON Model Files

The submission includes FALCON input file and mesh for the an initial pressure-temperature simulation, and a second set for pressure-temperature-displacement simulation. All simulations are steady state. Data and input for the FORGE Phase 2 native state model were compiled from hi...

Podgorney, R. Idaho National Laboratory

Jun 06, 2019
2 Resources
0 Stars
Publicly accessible

Establishing the Frontier Observatory for Research in Geothermal Energy (FORGE) on the Newberry Volcano, OR

The proposed Newberry Volcano FORGE site is in central Oregon on the northwest flank of the largest volcano in the Cascades volcanic arc. Beneath Newberry Volcano is one of the largest geothermal heat reservoirs in the western United States, extensively studied for the last 40 yea...

Bonneville, A. et al Pacific Northwest National Laboratory

Feb 22, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16B(78)-32 Extended Dual Well Circulation Testing Fiber Optic Monitoring Report August 2024

This report documents the post-hydraulic fracturing extended circulation test between Utah FORGE wells 16A and 16B conducted in August 2024. In well 16B, fiber optic measurements of Rayleigh frequency shift distributed strain sensing (RFS-DSS) and distributed temperature sensing ...

Jurick, D. et al Neubrex Energy Services (US), LLC

Aug 30, 2024
1 Resources
0 Stars
Publicly accessible

EGS Collab: Modeling and Simulation Working Group Teleconference Series (1-98)

This submission contains the presentation slides and recordings from the first 98 EGS Collab Modeling and Simulation Working Group teleconferences. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field activities and resul...

White, M. et al Pacific Northwest National Laboratory

Feb 04, 2020
100 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Distributed Fiber Optic Temperature Data (DTS)

Distributed fiber optic sensing was an important part of the monitoring system for EGS Collab Experiment #2. A single loop of custom fiber package was grouted into the four monitoring boreholes that bracketed the experiment volume. This fiber package contained two multi-mode fiber...

Rodriguez Tribaldos, V. et al Lawrence Berkeley National Laboratory

Nov 08, 2022
10 Resources
0 Stars
Publicly accessible

Utah FORGE: Stress Logging Data

This spreadsheet consist of data and graphs from deep well 58-32 stress testing from 6900 7500 ft depth. Measured stress data were used to correct logging predictions of in situ stress. Stress plots shows pore pressure (measured during the injection testing), the total vertical in...

McLennan, J. Energy and Geoscience Institute at the University of Utah

Mar 14, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2446: Report on Laboratory Block Experiments with Six Different Combinations of Stresses and Rock Fabrics

This report documents a series of block-scale hydraulic fracturing experiments, simulating Utah FORGE conditions to investigate how different combinations of in situ stress regimes, well orientations, and thermal stress conditions influence fracture initiation and propagation. The...

Bunger, A. and Lu, Y. Lawrence Livermore National Laboratory

Jan 30, 2025
1 Resources
0 Stars
Publicly accessible

StimuFrac Compressibility as a Function of CO2 Molar Fraction

Compressibility values were obtained in a range of pressures at 250degC by employing a fixed volume view cell completely filled with PAA aqueous solution and injecting CO2 at constant flow rate (0.3mL/min). Pressure increase as a function of supercritical CO2 (scCO2) mass fraction...

A., C. Pacific Northwest National Laboratory

Apr 29, 2016
1 Resources
0 Stars
Publicly accessible

Brady Geothermal Field PoroTomo Laboratory Deployment Map

Map of the PoroTomo Laboratory at Brady Field, Nevada. Map includes locations of GPS Stations, Shaker Stations, Vibroseis Sites, Seismometers, Fiber-Optic Cables, and wells

Lopeman, J. University of Wisconsin

Mar 01, 2016
1 Resources
0 Stars
Publicly accessible

Modeling Responses of Naturally Fractured Geothermal Reservoir to Low-Pressure Stimulation

Hydraulic shearing is an appealing reservoir stimulation strategy for Enhanced Geothermal Systems. It is believed that hydro-shearing is likely to simulate a fracture network that covers a relatively large volume of the reservoir whereas hydro-fracturing tends to create a small nu...

Fu, P. and Carrigan, C. Lawrence Livermore National Laboratory

Jan 01, 2012
2 Resources
0 Stars
Publicly accessible

WISE-CASING: DC Simulation at Containment and Monitoring Institute (CaMI), Calgary, Canada

For the model calculation we applied EM3D using completion diagram of CaMI site and a background resistivity consistent with the borehole logs. It was also important to use the accurate position of the return electrode. We note that for the data fit the code also incorporated we...

Wang, J. and Wilt, M. Lawrence Berkeley National Laboratory

Apr 30, 2019
7 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 7 8 9 Next >>