Search OEDI Data

Utah FORGE 3-2535: Modeling Studies of Energized Steel-Casing Source EM Method for Detecting Stimulated Zone

Numerical modeling Studies for electromagnetic (EM) Data Acquisition Survey Design this milestone report describes the 3D modeling studies of energized steel-casing source electromagnetic method for detecting stimulated zone at the Utah FORGE Site. FORGE project 3-2535 is planning...

Um, E. et al Lawrence Berkeley National Laboratory

Feb 06, 2023
4 Resources
0 Stars
Publicly accessible

Subsurface Characterization and Machine Learning Predictions at Brady Hot Springs Results

Geothermal power plants typically show decreasing heat and power production rates over time. Mitigation strategies include optimizing the management of existing wells increasing or decreasing the fluid flow rates across the wells and drilling new wells at appropriate locations. Th...

Beckers, K. et al National Renewable Energy Laboratory

Oct 20, 2021
6 Resources
0 Stars
Publicly accessible

PoroTomo Distributed Temperature Sensing (DTS) Measurements made in Brady Observation Well 56-1

This submission is a follow-up to Distributed Temperature Sensing (DTS) measurements made in Brady observation well 56-1 during the PoroTomo field experiment conducted in March, 2016. The measurements in this data set were made on August 24, 2018 over an approximately 20 hour per...

Kratt, C. et al Oregon State University

Jan 09, 2019
6 Resources
0 Stars
Publicly accessible

National Brackish Groundwater Assessment 2017

Brackish groundwater (BGW), defined for this assessment as having a dissolved-solids concentration between 1,000 and 10,000 milligrams per liter, is an unconventional source of water that may offer a partial solution to current (2016) and future water challenges. In support of the...

Qi, S. and Harris, A. United States Geological Survey

Apr 05, 2017
3 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements

The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...

Alumbaugh, D. et al Lawrence Berkeley National Laboratory

Dec 01, 2022
5 Resources
0 Stars
Publicly accessible

Appalachian Basin Play Fairway Analysis Analyses and Results

*This submission updates a 2015 submission for the utilization analysis (https://gdr.openei.org/submissions/623)* The files document the analysis of utilization potential in support of Phase 1 Low Temperature Geothermal Play Fairway Analysis for the Appalachian Basin. This 2016 su...

E., T. Cornell University

Jul 30, 2016
2 Resources
0 Stars
Publicly accessible

Commercial and Residential Hourly Load Profiles for all TMY3 Locations in the United States

Note: This dataset has been superseded by the dataset found at "End-Use Load Profiles for the U.S. Building Stock" (submission 4520; linked in the submission resources), which is a comprehensive and validated representation of hourly load profiles in the U.S. commercial and reside...

Ong, S. and Clark, N. National Renewable Energy Laboratory

Nov 25, 2014
22 Resources
1 Stars
Publicly accessible

NREL GIS Data: Alaska Low Resolution Concentrating Solar Power Resource

_Abstract:_ Monthly and annual average solar resource potential for Alaska. _Purpose:_ Provide information on the solar resource potential for Alaska. The insolation values represent the average solar energy available to a flat plate collector, such as a photovoltaic panel, o...

Wood, J. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

National Transmission Planning Study Long-Term Modeling Results

The National Transmission Planning Study (NTP Study) analyzed the transformation needed to ensure the U.S. transmission system continues to reliably meet electricity demand as the power sector evolves. The study linked several long and short-term power systems models to test numer...

Brown, P. and Mai, T. National Renewable Energy Laboratory (NREL)

Sep 10, 2023
14 Resources
0 Stars
Publicly accessible

Oregon Cascades Play Fairway Analysis: Faults and Heat Flow Maps

This submission includes a fault map of the Oregon Cascades and backarc, a probability map of heat flow, and a fault density probability layer. More extensive metadata can be found within each zip file. For information about "Oregon Faults," contact John David Trimble, Oregon Sta...

Trimble, J. University of Utah

Nov 15, 2015
4 Resources
0 Stars
Publicly accessible

Hybrid machine learning model to predict 3D in-situ permeability evolution

Enhanced geothermal systems (EGS) can provide a sustainable and renewable solution to the new energy transition. Its potential relies on the ability to create a reservoir and to accurately evaluate its evolving hydraulic properties to predict fluid flow and estimate ultimate therm...

Elsworth, D. and Marone, C. Pennsylvania State University

Nov 22, 2022
4 Resources
0 Stars
Publicly accessible

NREL GIS Data: Filtered Direct Normal Solar Resource for the Southwest United States (2 Percent Slope and Less)

Filtered (2% slope and less) direct normal solar resource data for the Southwest United States This data provides filtered solar resource averaged over surface cells of 0.1 degrees in both latitude and longitude, or about 10 km in size. Exclusions: Contiguous Area 1km squared;...

Wood, J. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

NREL GIS Data: Filtered Direct Normal Solar Resource for the Southwest United States (3 Percent Slope and Less)

Filtered (3% slope and less) direct normal solar resource data for the Southwest United States This data provides filtered solar resource averaged over surface cells of 0.1 degrees in both latitude and longitude, or about 10 km in size. Exclusions: Contiguous Area 1km squared;...

Wood, J. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

NREL GIS Data: Filtered Direct Normal Solar Resource for the Southwest United States (4 Percent Slope and Less)

Filtered (4% slope and less) direct normal solar resource data for the Southwest United States This data provides filtered solar resource averaged over surface cells of 0.1 degrees in both latitude and longitude, or about 10 km in size. Exclusions: Contiguous Area 1km squared;...

Wood, J. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

NREL GIS Data: Filtered Direct Normal Solar Resource for the Southwest United States (5 Percent Slope and Less)

Filtered (5% slope and less) direct normal solar resource data for the Southwest United States This data provides filtered solar resource averaged over surface cells of 0.1 degrees in both latitude and longitude, or about 10 km in size. Exclusions: Contiguous Area 1km squared;...

Wood, J. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

NREL GIS Data: Filtered Direct Normal Solar Resource for the Southwest United States (1 Percent Slope and Less)

Filtered (1% slope and less) direct normal solar resource data for the Southwest United States This data provides filtered solar resource averaged over surface cells of 0.1 degrees in both latitude and longitude, or about 10 km in size. Exclusions: Contiguous Area 1km squared;...

Wood, J. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Geocellular model of St. Peter Sandstone for University of Illinois at Urbana-Champaign DDU Feasibility Study

The geocellular model of the St. Peter Sandstone was constructed for the University of Illinois at Urbana-Champaign DDU feasibility study. Starting with the initial area of review (18.0 km by 18.1 km [11.2 miles by 11.3 miles]) the boundaries of the model were trimmed down to 9.7 ...

Damico, J. University of Illinois

Dec 31, 2018
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Discrete Fracture Network (DFN) Data

The FORGE team is making these fracture models available to researchers wanting a set of natural fractures in the FORGE reservoir for use in their own modeling work. They have been used to predict stimulation distances during hydraulic stimulation at the open toe section of well 1...

Finnila, A. and Podgorney, R. Golder Associates Inc.

Jun 24, 2020
66 Resources
0 Stars
Publicly accessible

NREL GIS Data: Continental United States Photovoltaic (Tilt = Latitude) 10km Resolution (1998 2005)

This data provides monthly average and annual average daily total solar resource averaged over surface cells of 0.1 degrees in both latitude and longitude, or about 10 km in size. This data was developed using the State University of New York/Albany satellite radiation model. This...

Wood, J. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Commercial Reference Building: Medium Office

Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus (see "About EnergyPlus" resource link) simulation software. Included here is data pertaining to the reference building type "Medium Office" for each of the 16 climate z...

Deru, M. et al National Renewable Energy Laboratory

Nov 25, 2014
8 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 Next >>

Search OEDI Data

Order by:

Available Now:

Utah FORGE 3-2535: Modeling Studies of Energized Steel-Casing Source EM Method for Detecting Stimulated Zone

Subsurface Characterization and Machine Learning Predictions at Brady Hot Springs Results

PoroTomo Distributed Temperature Sensing (DTS) Measurements made in Brady Observation Well 56-1

National Brackish Groundwater Assessment 2017

Utah FORGE 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements

Appalachian Basin Play Fairway Analysis Analyses and Results

Commercial and Residential Hourly Load Profiles for all TMY3 Locations in the United States

NREL GIS Data: Alaska Low Resolution Concentrating Solar Power Resource

National Transmission Planning Study Long-Term Modeling Results

Oregon Cascades Play Fairway Analysis: Faults and Heat Flow Maps

Hybrid machine learning model to predict 3D in-situ permeability evolution

NREL GIS Data: Filtered Direct Normal Solar Resource for the Southwest United States (2 Percent Slope and Less)

NREL GIS Data: Filtered Direct Normal Solar Resource for the Southwest United States (3 Percent Slope and Less)

NREL GIS Data: Filtered Direct Normal Solar Resource for the Southwest United States (4 Percent Slope and Less)

NREL GIS Data: Filtered Direct Normal Solar Resource for the Southwest United States (5 Percent Slope and Less)

NREL GIS Data: Filtered Direct Normal Solar Resource for the Southwest United States (1 Percent Slope and Less)

Geocellular model of St. Peter Sandstone for University of Illinois at Urbana-Champaign DDU Feasibility Study

Utah FORGE: Discrete Fracture Network (DFN) Data

NREL GIS Data: Continental United States Photovoltaic (Tilt = Latitude) 10km Resolution (1998 2005)

Commercial Reference Building: Medium Office

Commercial Reference Building: Small Hotel

NREL GIS Data: Continental United States Direct Normal Solar Resource 10km Resolution (1998 2005)

NREL GIS Data: Hawaii Direct Normal Solar Resource 10km Resolution (1998 2005)

NREL GIS Data: Continental United States Global Horizontal Solar Resource 10km Resolution (1998 2005)

NREL GIS Data: Hawaii Photovoltaic (Tilt = Latitude) 10km Resolution (1998 2005)