Search OEDI Data
Showing results 1 - 25 of 52.
Show
results per page.
Order by:
Available Now:
Research Areas
Accessibility
Data Type
Organization
Source
Development of 3D Geological Model of Tuscarora Sandstone for Feasibility of Deep Direct-Use Geothermal at West Virginia University Main Campus
The subsurface uncertainty at West Virginia University Main Campus is dominated by the uncertainty in the projections of geofluid flowrate in the target formation, the Tuscarora Sandstone. In this paper, three cores from the heterogeneous reservoir, available through West Virginia...
Moore, J. et al West Virginia University
Oct 23, 2018
5 Resources
0 Stars
Publicly accessible
5 Resources
0 Stars
Publicly accessible
West Flank Coso FORGE: Petrographic and X-Ray Diffraction Analyses for Samples
XRD and Petrographic Study for wells 83-11 33A-7 and 33A-7RD-1 West Flank FORGE. Work and report completed by Clay Jones and Joseph Moore at the Energy and Geoscience Institute (EGI) in 2011.
Jones, C. and Moore, J. Sandia National Laboratories
May 16, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Summary of Cement Formulations Tested by BNL for Self-Healing Ability Tests Conditions and Data
A table of cement formulations tested by Brookhaven National Laboratory in 2016-2017 in the frame of the "Self-healing and Re-Adhering Cements with Improved Toughness at Casing and Formation Interfaces for Geothermal Wells" project.
Sugama, T. Brookhaven National Laboratory
Sep 27, 2017
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE Deep Wells Water and Gas Sampling with Analyses by ThermoChem (October, 2022)
This data includes a document that describes the effort to collect and analyze water and gas samples from deep Utah FORGE wells 16A(78)-32, 58-32, 56-32 and 78B-32 along with additional pdf files showing ThermoChem's analyses attached as an appendix.
Joness, C. Energy and Geoscience Institute at the University of Utah
Oct 26, 2022
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: Well Data for Student Competition
Well 58-32 (previously labeled MU-ESW1) was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site.
Well Accord-1 was drilled decades ago for geothermal exploration purposes. While ...
Podgorney, R. et al Idaho National Laboratory
Dec 07, 2018
12 Resources
0 Stars
Publicly accessible
12 Resources
0 Stars
Publicly accessible
Geothermometry Mapping of Deep Hydrothermal Reservoirs in Southeastern Idaho: Final Report
Geothermometry Mapping of Deep Hydrothermal Reservoirs in Southeastern Idaho. Project final report with detail appendices.
Mattson, E. et al Idaho National Laboratory
Aug 15, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Low-Temperature Hydrothermal Resource Potential Estimate
Compilation of data (spreadsheet and shapefiles) for several low-temperature resource types, including isolated springs and wells, delineated area convection systems, sedimentary basins and coastal plains sedimentary systems. For each system, we include estimates of the accessibl...
Mullane, M. et al National Renewable Energy Laboratory
Jun 30, 2016
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Geothermal Water Use: Life Cycle Water Consumption, Water Resource Assessment, and Water Policy Framework
This report examines life cycle water consumption for various geothermal technologies to better understand factors that affect water consumption across the life cycle (e.g., power plant cooling, belowground fluid losses) and to assess the potential water challenges that future geo...
Schroeder, J. et al Argonne National Laboratory
Jun 10, 2014
8 Resources
0 Stars
Publicly accessible
8 Resources
0 Stars
Publicly accessible
Low-Temperature Hydrothermal Resource Potential Estimate
Compilation of data (spreadsheet and shapefiles) for several low-temperature resource types, including isolated springs and wells, delineated area convection systems, sedimentary basins and coastal plains sedimentary systems. For each system, we include estimates of the accessible...
Mullane, M. et al National Renewable Energy Laboratory
Jun 30, 2016
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
An HPC-Based Hydrothermal Finite Element Simulator for Modeling Underground Geothermal Behavior with Example Simulations on The Treasure Island and UC Berkeley Campus
This submission contains the source code of the Hydrothermal Finite Element Simulator used for the Treasure Island and UC Berkeley campus geothermal simulation. It contains a report that summarizes the development and validation of this Hydrothermal Finite Element Simulator, with ...
Chen, K. et al Lawrence Berkeley National Laboratory
Aug 01, 2021
5 Resources
0 Stars
Publicly accessible
5 Resources
0 Stars
Publicly accessible
Deep Direct-Use Feasibility Study Estimation of Reservoir Properties for the Tuscarora Sandstone
This dataset contains black-and-white photographic images of individual core segments from well Preston 119 and photomicrographs taken of petrographic thin sections from well Clay 513. Minipermeameter measurement results of 2,260 samples for fracture and matrix permeability on cor...
McDowell, R. West Virginia University
Dec 19, 2019
5 Resources
0 Stars
Publicly accessible
5 Resources
0 Stars
Publicly accessible
Hydrogeologic Windows: Regional Signature Detection for Blind and Traditional Geothermal Play Fairways applied to Southwestern New Mexico
Final Report describing regional signature detection for blind and traditional play fairways as part of Phase I of New Mexico Play Fairway Analysis. This project seeks to reduce exploration risk and identify new prospective targets using available geologic, geochemical, and geophy...
Bielicki, J. et al Los Alamos National Laboratory
Oct 16, 2015
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Fallon FORGE: GIS and Downhole Well Lithology Data
ArcGIS Map Package with MT Station Locations, 2D Seismic Lines, Well data, Known Regional Hydrothermal Systems, Regional Historic Earthquake Seismicity, Regional Temperature Gradient Data, Regional Heat Flow Data, Regional Radiogenic Heat Production, Local Geology, Land Status, Cu...
Blankenship, D. Sandia National Laboratories
Dec 23, 2015
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Deep Direct-Use Feasibility Study Computed Tomography (CT)-scanned data Analysis for the Tuscarora Sandstone at the National Energy Technology Laboratory
The computed tomography (CT) facilities at the National Energy Technology Laboratory (NETL) Morgantown, West Virginia site were used to characterize core of the Tuscarora Sandstone from a vertical well in Preston County WV, the Preston-119 from a depth of 7,165 to 7,438 ft. The pr...
Brown, S. et al West Virginia University
Jan 10, 2020
11 Resources
0 Stars
Publicly accessible
11 Resources
0 Stars
Publicly accessible
Utah FORGE: Mineral Mountains West Fault System Report
This archive contains a report on the Mineral Mountains West fault system as part of phase 2C and the evidence for the northern terminus of this structure. Geologic field mapping, reprocessing of 3D seismic reflection data, and soil gas surveys contributed to this effort.
Simmons, S. and Miller, J. Energy and Geoscience Institute at the University of Utah
Jul 01, 2019
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE Report on the Thermal Properties of Wells 16A(78)-32 & 58-32 Granite
This is a report from Metarock Laboratories on the thermal properties of Utah FORGE wells 16A(78)-32 & 58-32 granite. The report includes pictures of core samples, core details for the samples (where the sample was taken and the size of the sample), sample thermal expansion test r...
Laboratories, M. et al Energy and Geoscience Institute at the University of Utah
May 04, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Silver Peak Innovative Exploration Project (Ram Power Inc.)
Data generated from the Silver Peak Innovative Exploration Project, in Esmeralda County, Nevada, encompasses a deep-circulation (amagmatic) meteoric-geothermal system circulating beneath basin-fill sediments locally blanketed with travertine in western Clayton Valley (lithium-rich...
Miller, C. Ram Power, Inc.
Jan 01, 2010
27 Resources
0 Stars
Publicly accessible
27 Resources
0 Stars
Publicly accessible
Geothermal Exploration of Newberry Volcano, Oregon Summary Report
Abstract: Davenport Newberry (Davenport) has completed 8 years of exploration for geothermal energy on Newberry Volcano in central Oregon. Two deep exploration test wells were drilled by Davenport on the west flank of the volcano, one intersected a hydrothermal system; the other ...
Waibel, A. et al Southern Methodist University
Jan 01, 2015
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: X-Ray Diffraction Data
This dataset contains X-ray diffraction (XRD) data taken from wells and outcrops as part of the DOE GTO supported Utah FORGE project located near Roosevelt Hot Springs. It contains an Excel spreadsheet with the XRD data, a text file with sample site names, types, and locations in ...
Nash, G. and Jones, C. Energy and Geoscience Institute at the University of Utah
Feb 07, 2018
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
Performance, Cost, and Financial Parameters of Geothermal District Heating Systems for Market Penetration Modeling under Various Scenarios
The U.S. Department of Energy Geothermal Vision (GeoVision) Study is currently looking at the potential to increase geothermal deployment in the U.S. and to understand the impact of this increased deployment. This paper reviews 31 performance, cost, and financial parameters as inp...
Beckers, K. and Young, K. National Renewable Energy Laboratory
Mar 23, 2017
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
SGW paper Rheological Properties of Drilling Fluids Containing Special Additives for Geothermal Drilling Applications
The paper was presented at the 46th Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, California, February 15-17, 2021. In this study, the effectiveness of different additives was evaluated in maintaining drilling fluid rheology at HPHT(high pressure and...
Mohamed, A. et al University of Oklahoma
Jan 04, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: 2023 Phase 3B Year 1 Annual Report
This report discusses the objectives, goals, accomplishments and results of Phase 3B Year 1 of the Utah FORGE project. The report includes infrastructure, seismic monitoring, modelling, external R&D, communications and outreach, data produced, lessons learned, conclusions, and pla...
Moore, J. et al Energy and Geoscience Institute at the University of Utah
Aug 09, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Alum Innovative Exploration Project (Ram Power Inc.)
Data generated from the Alum Innovative Exploration Project, one of several promising geothermal properties located in the middle to upper Miocene (~11-5 Ma, or million years BP) Silver Peak-Lone Mountain metamorphic core complex (SPCC) of the Walker Lane structural belt in Esmera...
Miller, C. Ram Power, Inc.
Jan 01, 2010
14 Resources
0 Stars
Publicly accessible
14 Resources
0 Stars
Publicly accessible
Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report
The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The Project chose the Dixie Valley Geothermal System in Nevada as a field laboratory site for methodlogy calibration...
Iovenitti, J. AltaRock Energy Inc
May 15, 2013
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE Phase 3A Year 1 Annual Report for 2020
This is the Utah FORGE annual report for Phase 3A year 1, which was completed on December 28th, 2020. This report includes site infrastructure, site operations, seismic monitoring, a conceptual geological model, outreach, and communications for the Utah FORGE project during Phase ...
Moore, J. et al Energy and Geoscience Institute at the University of Utah
Dec 28, 2020
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible