Search OEDI Data

Geometric, structural, and control co-design for undersea kites

Focusing on a marine hydrokinetic energy application, this paper presents a combined geometric, structural, and control co-design framework for optimizing the performance of energy-harvesting kites subject to structural constraints. While energy-harvesting kites can offer more tha...

Vermillion, C. et al North Carolina State University

Sep 14, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439v2: Report on Predicting Far-Field Stresses Using Finite Element Modeling and Near-Wellbore Machine Learning for Well 16A(78)-32

This report presents the far-field stress predictions at two locations along the vertical section of Utah FORGE Well 16A (78)-32 using a physics-based thermo-poro-mechanical model. Three principal stresses in far-field were obtained by solving an inverse problem based on the near-...

Lu, G. et al University of Pittsburgh

Aug 30, 2024
2 Resources
0 Stars
Publicly accessible

kISMET Final Report and Highlights

The files in this submission describes the results of a series of stress measurement and hydraulic fracturing experiments conducted at the Sanford Underground Research Facility (SURF) in Lead, SD. This report describes the accomplishments of the kISMET (permeability (k) and Induce...

Oldenburg, C. et al Lawrence Berkeley National Laboratory

Oct 31, 2016
2 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Deployment and Mooring System

The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power system consists of three major subsystems: shore-side power electronics, mooring system, and turbine generator unit (TGU...

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
2 Resources
0 Stars
Publicly accessible

Lift Equivalence and Cancellation for Airfoil Surge-Pitch-Plunge Oscillations

A NACA 0018 airfoil in freestream velocity is oscillated in longitudinal, transverse, and angle-of-attack directions with respect to the freestream velocity, known as surge, plunge, and pitch. The lift-based equivalence method introduces phase shifts between these three motions to...

Elfering, K. and Granlund, K. North Carolina State University

Jan 01, 2020
1 Resources
0 Stars
Publicly accessible

CalWave xWave Device, Non-Commercially Sensitive Project Report

CalWave has developed a submerged pressure differential type Wave Energy Converter (WEC) architecture called xWave. The single body device oscillates submerged, is positively buoyant, and taut moored to the sea floor and integrates novel features such as absorber submergence depth...

Lehmann, M. and Davidson, R. CalWave Power Technologies Inc.

Feb 29, 2024
1 Resources
0 Stars
Publicly accessible

TEAMER: WEC-Sim Modeling of Laminar Scientific Patented Seesaw Wave Energy Converter

Laminar Scientific's patented nearshore seesaw wave energy converter has several features assessed in this study utilizing the Wave Energy Converter SIMulator (WEC-Sim) Facility. One of these features is the ability to change spacing between two spherical floats of the seesaw to a...

Iyer, N. et al Laminar Scientific Inc.

Nov 21, 2024
2 Resources
0 Stars
Publicly accessible

Geomechanical Modeling for Thermal Spallation Drilling

Wells for Engineered Geothermal Systems (EGS) typically occur in conditions presenting significant challenges for conventional rotary and percussive drilling technologies: granitic rocks that reduce drilling speeds and cause substantial equipment wear. Thermal spallation drilling,...

Walsh, S. et al Lawrence Livermore National Laboratory

Aug 24, 2011
1 Resources
0 Stars
Publicly accessible

SGW paper Rheological Properties of Drilling Fluids Containing Special Additives for Geothermal Drilling Applications

The paper was presented at the 46th Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, California, February 15-17, 2021. In this study, the effectiveness of different additives was evaluated in maintaining drilling fluid rheology at HPHT(high pressure and...

Mohamed, A. et al University of Oklahoma

Jan 04, 2023
1 Resources
0 Stars
Publicly accessible

Fiber Optic Thermal Slug Experiments Conducted at Texas Tech University Report

The report details a thermal circulation test at Red Raider #2 at the Oil Field Technology Center (OTC) involving staged hot water injections and distributed temperature sensing (DTS) fiber optic measurements. It includes experimental setup, fluid flow and temperature data, therm...

Leggett, S. Texas Tech University

Apr 11, 2025
1 Resources
0 Stars
Publicly accessible

End of Well Report and Addenda

End of well report for the drilling of AK-3, the 3rd core hole in Hot Springs Bay Valley on Akutan Island. Project initiated and managed by the City of Akutan. Previous exploration and drilling of first 2 wells by Alaska Energy Authority, and this well partially funded by DOE. Dri...

Mann, M. Geothermal Resource Group on behalf of the City of Akutan

Sep 08, 2016
2 Resources
0 Stars
Publicly accessible

Techno-Economic Assessment for Integrating Biosorption into Rare Earth Recovery Process

The current uncertainty in the global supply of rare earth elements (REEs) necessitates the development of novel extraction technologies that utilize a variety of REE source materials. Herein, we examined the techno-economic performance of integrating a biosorption approach into a...

Jiao, Y. et al Lawrence Livermore National Laboratory

Oct 09, 2017
1 Resources
0 Stars
Publicly accessible

Grande Prairie Wind Purpose and Need Example

This is an example of how a purpose and need statement is put together for the Grande Prairie Wind Project.

Wiedmeyer, S. National Renewable Energy Laboratory

Apr 21, 2015
1 Resources
0 Stars
In curation

Geothermal Technologies Program GETEM and LCOE Improvements Review (March 21, 2013)

This file was a report submitted to GTO by Mark Paster, a consultant to the GETEM project, to outline the improvements that were made between summer 2011 and spring 2013. The report focuses on six areas of model improvement: (1) Site Specific Cost Variability; (2) Consistency wi...

Paster, M. Idaho National Laboratory

Mar 21, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE: 58-32 Injection and Packer Performance, April and May 2019

This is a PDF format summary report regarding the performance of a packer, which failed, and bridge plug used during the injection program in Utah FORGE deep Well 58-32, April and May, 2019.

McLennan, J. and Podgorney, R. Energy and Geoscience Institute at the University of Utah

Mar 22, 2020
1 Resources
0 Stars
Publicly accessible

Project Hotspot Report: Exploration

Project Hotspot applies innovative approaches to geothermal exploration in the Snake River Volcanic Province. This report summarizes results from our Phase 1 data compilation.

Shervais, J. Utah State University

Sep 17, 2010
1 Resources
0 Stars
Publicly accessible

RivGen Power System Overview, Igiugig, AK

System description of ORPC RivGen(R) Power System utilized at Igiugig, AK for testing of advanced controls

McEntee, J. Ocean Renewable Power Company

Aug 05, 2014
1 Resources
0 Stars
Publicly accessible

RANS Simulation VBM of Single Full Scale DOE RM1 MHK Turbine

Attached are the .cas and .dat files along with the required User Defined Functions (UDFs) and look-up table of lift and drag coefficients for Reynolds Averaged Navier-Stokes (RANS) simulation of a single full scale DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. In this...

Javaherchi, T. and Aliseda, A. University of Washington

Apr 10, 2013
8 Resources
0 Stars
Publicly accessible

Portland DDU Feasibility Study: The Spatial and Temporal Evolution of the Portland and Tualatin Basins, Oregon, USA

The Portland and Tualatin basins are part of the Puget-Willamette Lowland in the Cascadia forearc of Oregon and Washington. The Coast Range to the west has undergone Paleogene transtension and Neogene transpression, which is reflected in basin stratigraphy. To better understand th...

Scanlon, D. Portland State University

Jul 29, 2019
1 Resources
0 Stars
Publicly accessible

Control of an AUV with deployable energy-harvesting kite

This paper examines the control of an autonomous underwater vehicle (AUV) with a deployable energy-harvesting kite for oceanographic observation and surveillance. The proposed design and control strategies specifically address objectives of achieving high-payload, long-endurance A...

Reed, J. et al North Carolina State University

Sep 02, 2019
1 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Environmental Assessment

Marnagh, C. et al Ocean Renewable Power Company

Jun 14, 2018
1 Resources
0 Stars
Publicly accessible

Hathaway Solar Patriot House

The Hathaway Solar Patriot House was a Building America field research case study from 2001 to 2004. A report on this project is available in this record or from the National Renewable Energy Laboratory. http://www.nrel.gov/docs/fy05osti/37731.pdf

Norton, P. and Laboratory, N. National Renewable Energy Laboratory

Jun 10, 2016
4 Resources
0 Stars
In curation

Mapping Fracture Network Creation with Microseismicity During EGS Demonstrations

This a report for the project "Mapping Fracture Network Creation with Microseismicity During EGS Demonstrations". Effective enhanced geothermal systems (EGS) require optimal fracture networks for efficient heat transfer between hot rock and fluid. Microseismic mapping is a key too...

Templeton, D. et al Lawrence Livermore National Laboratory

Apr 18, 2014
1 Resources
0 Stars
Publicly accessible

Spooling control design for flight optimization of tethered tidal kites

This submission includes three peer-reviewed (under review) papers from the researchers at North Carolina State University presenting different control-based techniques to maximize the efficiency and robustness of a tethered energy-harvesting kite. Below are the abstracts of each ...

Daniels, J. et al North Carolina State University

Sep 16, 2019
3 Resources
0 Stars
Publicly accessible

M3 Wave DMP/APEX WEC Numerical Survivability Report Baseline Geometry

Summary of numerical survivability modeling method for the baseline geometry of the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX."

Roberts, J. et al M3 Wave

Aug 16, 2016
2 Resources
0 Stars
Publicly accessible

<< Previous 29 30 31 32 33 34 35 36 37 38 Next >>