Search OEDI Data

1D Heat Loss Models Validation Experiment

Contains data from the model validation in the 1D Heat Loss Models to Predict the Aquifer Temperature Profile during Hot/Cold Water Injection Project. The data include two COMSOL models (2D axisymmetric benchmark model and 2D Vinsome model), one python code (1D Vinsome based FEM n...

Chen, K. et al UC Berkeley

Jan 18, 2022
8 Resources
0 Stars
Publicly accessible

ALFA Biological Monitoring Density Values South Energy Test Site, Newport, Oregon

Density values from active acoustic measurements at South Energy Test Site. This data correspond to a bottom mounted upward-looking WBAT, deployed from April 19th to September 30th. Samples (175 pings) were collected hourly at 1Hz.

Horne, J. Northwest National Marine Renewable Energy Center

Apr 11, 2017
2 Resources
0 Stars
Publicly accessible

Q1 2023 U.S. Solar Photovoltaic System and Energy Storage Cost Benchmarks With Minimum Sustainable Price Analysis Data File

The U.S. Department of Energy's (DOE's) Solar Energy Technologies Office (SETO) aims to accelerate the advancement and deployment of solar technology in support of an equitable transition to a decarbonized economy no later than 2050, starting with a decarbonized power sector by 20...

Ramasamy. . et al National Renewable Energy Laboratory

Sep 25, 2023
4 Resources
0 Stars
Publicly accessible

Indoor and Outdoor Temperature data

We have used three LM35 temperature sensors to sense indoor and outdoor temperature at Bangkok University , Thailand. Two sensors (Sensor A and B)were placed in a air-conditioned room in the Engineering Building (6th Floor) and kept once sensor outside (Sensor C)

Maduranga, P. National Renewable Energy Laboratory

Jan 21, 2018
1 Resources
0 Stars
In curation

Risk Factor Analysis in Low-Temperature Geothermal Play Fairway Analysis for the Appalachian Basin (GPFA-AB)

This submission contains information used to compute the risk factors for the GPFA-AB project. The risk factors are natural reservoir quality, thermal resource quality, potential for induced seismicity, and utilization. The methods used to combine the risk factors included taking ...

E., T. Cornell University

Sep 30, 2015
191 Resources
0 Stars
Publicly accessible

NWEI Azura Technology Demonstration at WETS Final Reports

This submission contains the final scientific and technical report for the Azura technology demonstration at WETS. Also contained are all test reports as referenced in the final report. All test data from this project may be found under 'Related Datasets' on the MHKDR submission page.

Ling, B. et al Northwest Energy Innovations

Jul 01, 2018
18 Resources
0 Stars
Publicly accessible

USU Camas-1 Test Well: Documentation

This submission contains documents that describe the USU Camas-1 test well, drilled in Camas Prairie, Idaho, in Fall 2018 and Fall 2019. The purpose of this well is to validate exploration methodologies of the Snake River Plain (SRP) Play Fairway Analysis (PFA) project.

Shervais, J. Utah State University

Oct 31, 2018
13 Resources
0 Stars
Publicly accessible

Hathaway Solar Patriot House

The Hathaway Solar Patriot House was a Building America field research case study from 2001 to 2004. A report on this project is available in this record or from the National Renewable Energy Laboratory. http://www.nrel.gov/docs/fy05osti/37731.pdf

Norton, P. and Laboratory, N. National Renewable Energy Laboratory

Jun 10, 2016
4 Resources
0 Stars
In curation

Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Fine Scale Stress Test Modelling

Mesh, properties, initial conditions, injection/withdrawal rates for modelling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from ground for Stockton University reservoir cooling system (aquifer storage cooling system), Galloway, New Jersey, fo...

Smith, J. et al Lawrence Berkeley National Laboratory

Feb 22, 2021
14 Resources
0 Stars
Publicly accessible

EGS Collab: Modeling and Simulation Working Group Teleconference Series (99-128)

This submission contains the presentation slides and recordings from EGS Collab Modeling and Simulation Working Group (MSWG) teleconferences number 99 through 128. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field acti...

White, M. et al Pacific Northwest National Laboratory

Jun 07, 2022
31 Resources
0 Stars
Publicly accessible

Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Large Scale Grid

Mesh, properties, initial conditions, injection/withdrawal rates for modeling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from ground for Stockton University reservoir cooling system (aquifer storage cooling system), Galloway, New Jersey, on ...

Smith, J. et al Lawrence Berkeley National Laboratory

Feb 26, 2021
15 Resources
0 Stars
Publicly accessible

Utah FORGE: 2023 Large Upscaled Discrete Fracture Network Models

This dataset includes the data and a report on the large upscaled discrete fracture network modeling done for the Utah FORGE project in 2023. The FORGE modeling team is making five discrete fracture network (DFN) realizations of a large reservoir model available to researchers. Th...

Finnila, A. Energy and Geoscience Institute at the University of Utah

Oct 02, 2023
17 Resources
0 Stars
Publicly accessible

Project Hotspot Report: Exploration

Project Hotspot applies innovative approaches to geothermal exploration in the Snake River Volcanic Province. This report summarizes results from our Phase 1 data compilation.

Shervais, J. Utah State University

Sep 17, 2010
1 Resources
0 Stars
Publicly accessible

Fiber Optic Thermal Slug Experiments Conducted at Texas Tech University Report

The report details a thermal circulation test at Red Raider #2 at the Oil Field Technology Center (OTC) involving staged hot water injections and distributed temperature sensing (DTS) fiber optic measurements. It includes experimental setup, fluid flow and temperature data, therm...

Leggett, S. Texas Tech University

Apr 11, 2025
1 Resources
0 Stars
Publicly accessible

2D Seismic Reflection Survey Crump Geyser Geothermal Prospect Warner Valley, Oregon

2D Seismic Reflection Survey from Crump Geyser Geothermal Prospect in Warner Valley, Oregon

Smith, N. and Company, N. National Renewable Energy Laboratory

Jun 10, 2015
4 Resources
0 Stars
In curation

Protocol for Regeneration of Ligand-Depleted Adsorption Media for Rare Earth Element Recovery from Geothermal Brine

Description of experimental protocol used to characterize the effectiveness of regenerating ligand-based adsorption media through the addition of ligands when media were previously depleted of ligands during use. Results of the effectiveness of this regeneration are also described.

Stull, D. Tusaar Corp.

May 24, 2016
1 Resources
0 Stars
Publicly accessible

End of Well Report and Addenda

End of well report for the drilling of AK-3, the 3rd core hole in Hot Springs Bay Valley on Akutan Island. Project initiated and managed by the City of Akutan. Previous exploration and drilling of first 2 wells by Alaska Energy Authority, and this well partially funded by DOE. Dri...

Mann, M. Geothermal Resource Group on behalf of the City of Akutan

Sep 08, 2016
2 Resources
0 Stars
Publicly accessible

Structural and Tectonic Controls of Geothermal Activity in the Basin and Range Province

We are conducting an inventory of structural settings of geothermal systems (>400 total) in the extensional to transtensional Great Basin region of the western USA. A system of NW-striking dextral faults known as the Walker Lane accommodates ~20% of the North American-Pacific plat...

Faulds, J. et al University of Nevada

Nov 30, 2012
1 Resources
0 Stars
Publicly accessible

Harsh Environment Sensors for Geothermal Applications

Technical papers detailing the development of harsh environment sensors for geothermal applications. Principle Investigator is Prof. Albert P. Pisano (University of California, Berkeley). Submission includes a paper about geothermal environmental exposure testing on encapsulant a...

Senesky, D. et al Regents of the University University of California

Jan 01, 2012
2 Resources
0 Stars
Publicly accessible

Pressure Sensor and Telemetry Methods for Measurement while Drilling in Geothermal Wells

Project status report as of end of 2011. Key milestones and accomplishments in the year 2011 include: Proof of feasibility of analog and digital components with their lifetime tested for more than 500 hours at 300 degrees C, Demonstration of ceramic-based packaging capable of su...

Vert, A. GE Global Research

Jan 01, 2012
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3A, Year 2, Annual Report

This is the annual report for Utah FORGE Phase 3A, year two, which was published on July 28th, 2022. The report includes site infrastructure, site operations, seismic monitoring reports, FORGE modeling reports, and external research and design. The ultimate objective of Utah FORGE...

Moore, J. et al Energy and Geoscience Institute at the University of Utah

Jul 29, 2022
1 Resources
0 Stars
Publicly accessible

RANS Simulation RRF of Single Full Scale DOE RM1 MHK Turbine

Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single full scale DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. In this case study taking advantage of the symmetry of the DOE RM1 geometry, only half of the geometry i...

Javaherchi, T. et al University of Washington

Apr 10, 2013
2 Resources
0 Stars
Publicly accessible

Characterizing favourable structural settings of geothermal reservoirs in extensional regions: Enhanced exploration strategies

Exploration of geothermal systems is commonly hampered by the risk of unsuccessful drilling. A major problem in selecting well sites is that the favorable settings of known systems are generally not adequately characterized. This is particularly important in amagmatic regions, wh...

Faulds, J. et al University of Nevada

Nov 30, 2010
1 Resources
0 Stars
Publicly accessible

Fully Coupled Geomechanics and Discrete Flow Network Modeling of Hydraulic Fracturing for Geothermal Applications

The primary objective of our current research is to develop a computational test bed for evaluating borehole techniques to enhance fluid flow and heat transfer in enhanced geothermal systems (EGS). Simulating processes resulting in hydraulic fracturing and/or the remobilization of...

Fu, P. et al Lawrence Livermore National Laboratory

Jan 01, 2011
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Orientation of Borehole and Surface Seismic Stations

The University of Utah Seismograph Stations (UUSS) are responsible for the seismic monitoring of the experiments and have installed a series of permanent surface and borehole seismic instruments around the Utah FORGE project site. This report discusses the methods used for proper ...

Bradshaw, P. et al University of Utah Seismograph Stations

Jun 21, 2023
1 Resources
0 Stars
Publicly accessible

<< Previous 27 28 29 30 31 32 33 34 35 36 Next >>