Search OEDI Data

West Flank Coso FORGE: 52B-7 Image and Mud Log

FMI image log and mud log of well 52B-7

Blankenship, D. Sandia National Laboratories

Apr 01, 1992
2 Resources
0 Stars
Publicly accessible

Distributed Generation Market Demand (dGen) model

The Distributed Generation Market Demand (dGen) model simulates customer adoption of distributed energy resources (DERs) for residential, commercial, and industrial entities in the United States or other countries through 2050. The dGen model can be used for identifying the sector...

Stanley, T. et al National Renewable Energy Laboratory (NREL)

Oct 16, 2020
4 Resources
0 Stars
Curated

Airport and Heliport Setbacks

This dataset represents a first-order quantification of airport and heliport setback requirements based on the Federal Aviation Administration (FAA) 14 CFR Part 77.9. It defines the following FAA notice criteria that we use to create runway buffers. Runways longer than 3,200 feet ...

Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)

Jan 01, 2024
3 Resources
0 Stars
Curated

Ground Source Heat Pump Parameter Survey

The purpose of this report is to investigate the effects of various parameters in a horizontal loop geothermal heat pump system. The obtained values include the temperature distribution over the entire system as well as the exiting temperature and bulk heat rate of the fluid. The ...

Gray, E. Wright State University

Jul 31, 2013
1 Resources
0 Stars
Publicly accessible

Effectiveness of Shallow Temperature Surveys to Target a Geothermal Reservoir at Previously Explored Site at McGee Mountain, Nevada: Final Report for U.S. Department Of Energy Grant EE-0002830

The McGee Mountain geothermal area was selected to test early-stage shallow temperature survey techniques and drill two slim holes to test the resource. Geothermal Technical Partners, Inc. was able to complete only a small portion of the project before lack of funding prevented f...

Zehner, R. Geothermal Technical Partners, Inc.

Mar 07, 2014
1 Resources
0 Stars
Publicly accessible

Aquantis 2.5 MW Ocean Current Generation Device MHK Hydrofoils Design, Wind Tunnel Optimization and CFD Analysis Report

Dataset contains MHK Hydrofoils Design and Optimization and CFD Analysis Report for the Aquantis 2.5 MW Ocean Current Generation Device, as well as MHK Hydrofoils Wind Tunnel Test Plan and Checkout Test Report.

Shiu, H. et al Dehlsen Associates, LLC

Jun 03, 2015
16 Resources
0 Stars
Publicly accessible

Reservoir Stimulation Optimization with Operational Monitoring for Creation of EGS

EGS field projects have not sustained production at rates greater than 1/2 of what is needed for economic viability. The primary limitation that makes commercial EGS infeasible is our current inability to cost-effectively create high-permeability reservoirs from impermeable, igneo...

A., C. Pacific Northwest National Laboratory

Sep 15, 2014
5 Resources
0 Stars
Publicly accessible

Geothermal Development and the Use of Categorical Exclusions Under NEPA

This study focuses primarily on the Categorial Exclusions (CX) process and its applicability to geothermal exploration. In this paper, we: Provide generalized background information on CXs, including previous NEPA reports addressing CXs, the process for developing CXs, and the ro...

Young, K. and Levine, A. National Renewable Energy Laboratory

Sep 30, 2014
4 Resources
0 Stars
Publicly accessible

Performance and Costs of Ductless Heat Pumps in Marine-Climate High-Performance Homes Habitat for Humanity The Woods

The Washington State University (WSU) Energy Program's Building America (BA) team conducted a case study of a high-performance affordable housing community: The Woods (Figure 1). This BA effort is part of a larger-scale study of 30 homes funded from 2013-2016 by Tacoma Public Util...

Lubliner, M. et al Washington State University

Apr 27, 2016
8 Resources
0 Stars
Publicly accessible

Data of PV panel attached on building

To use these files, please read the "Readme" file and the following items: There are seven files, six of which are ".xlsx" and the last one is ".m". 1. Code_building_2: This file contains the code base for data analysis, making and plotting mathematical models using Mathlab softwa...

Alvarez, L. University of Illinois

Oct 12, 2020
8 Resources
0 Stars
In progress

Initial testing of wave energy-powered UV-C LED anti-biofouling system, TEAMER Post-Access Report, 3newable LLC

Description of data products produced during the 3newables LLC. TEAMER (Testing & Expertise for Marine Energy) project entitled Initial Testing of Wave Energy Powered UV-C LED Anti-Biofouling System. Data are primarily comprised of imagery, quantitative biofouling mass, and scanni...

Minsky, M. et al 3newable LLC

Sep 20, 2022
2 Resources
0 Stars
Publicly accessible

Final Report Cascades/Aleutians Play Fairway Project

Final Report describing data collection, evaluation, modeling and analysis. Ranking of Cascade and Aleutian volcanic centers for geothermal potential.

Shevenell, L. et al ATLAS Geosciences Inc

Oct 31, 2015
1 Resources
0 Stars
Publicly accessible

Next Generation RivGen Power System: Feasibility Assessment of Hydroacoutics Data for Development of a Probability of Encounter Model of Salmon Smolts

This document contains a feasibility assessment for salmon smolt characterization and analysis based on existing hydroacoustics data and probability of encounter model.

Daroux, A. and Zydlewski, G. Igiugig Village Council

Oct 04, 2017
1 Resources
0 Stars
Publicly accessible

Energy Return On Investment of Engineered Geothermal Systems Data

The project provides an updated Energy Return on Investment (EROI) for Enhanced Geothermal Systems (EGS). Results incorporate Argonne National Laboratory's Life Cycle Assessment and base case assumptions consistent with other projects in the Analysis subprogram. EROI is a ratio o...

Mansure, C. Arthur Mansure

Jan 01, 2012
7 Resources
0 Stars
Publicly accessible

Wind Turbine Oil and Gas Pipeline Setbacks: Ordinances (2022) and Extrapolated Trends, 115 Hub Height 170 Rotor Diameter

This dataset represents wind energy setback requirements from oil and gas pipelines. A setback requirement is a minimum distance from a pipeline that an energy project may be developed. As of April 2022, no ordinances were discovered for any counties. Such ordinances are likely to...

Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)

Jan 01, 2024
3 Resources
0 Stars
Curated

Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report

The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The overall project area is 2500km2 with the Calibration Area (Dixie Valley Geothermal Wellfield) being about 170km2....

Iovenitti, J. AltaRock Energy Inc

Jan 02, 2014
11 Resources
0 Stars
Publicly accessible

Raleigh Housing Authority Duct Sealing Evaluation

In multifamily and attached buildings, manual duct sealing methods are often impractical or very costly and disruptive because of the difficulty in accessing leakage sites. In this project, two retrofit duct sealing techniques manually applied sealants and injecting a spray sealan...

Dentz, J. et al The Levy Partnership, Inc Systems Building Research Alliance

Apr 27, 2016
18 Resources
0 Stars
Publicly accessible

Snake River Plain FORGE: Site Characterization Data

The site characterization data used to develop the conceptual geologic model for the Snake River Plain site in Idaho, as part of phase 1 of the Frontier Observatory for Research in Geothermal Energy (FORGE) initiative. This collection includes data on seismic events, groundwater,...

Moos, D. and Barton, C. Idaho National Laboratory

Apr 18, 2016
49 Resources
0 Stars
Publicly accessible

Risk Factor Analysis in Low-Temperature Geothermal Play Fairway Analysis for the Appalachian Basin (GPFA-AB)

This submission contains information used to compute the risk factors for the GPFA-AB project. The risk factors are natural reservoir quality, thermal resource quality, potential for induced seismicity, and utilization. The methods used to combine the risk factors included taking ...

E., T. Cornell University

Sep 30, 2015
191 Resources
0 Stars
Publicly accessible

Deep Direct-Use Feasibility Study Computed Tomography (CT)-scanned data Analysis for the Tuscarora Sandstone at the National Energy Technology Laboratory

The computed tomography (CT) facilities at the National Energy Technology Laboratory (NETL) Morgantown, West Virginia site were used to characterize core of the Tuscarora Sandstone from a vertical well in Preston County WV, the Preston-119 from a depth of 7,165 to 7,438 ft. The pr...

Brown, S. et al West Virginia University

Jan 10, 2020
11 Resources
0 Stars
Publicly accessible

Exploration Best Practices on OpenEI

This is an electronic database detailing different types of, various phases of, best practices for, and cost and time associated with geothermal exploration techniques. The groups of exploration techniques included in the database are Data and Modeling Techniques, Downhole Techniq...

Young, K. National Renewable Energy Laboratory

Sep 20, 2013
2 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System ORPC Public Technical Report, Device Design

Technical report for public dissemination on the design progress for the Advanced TidGen(R) Power System.

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 27, 2018
1 Resources
0 Stars
Publicly accessible

Approaches to 30% Energy Savings at the Community Scale in the Hot-Humid Climate

The Building America Partnership for Improved Residential Construction, formerly the Building America Industrialized Housing Partnership, has worked with several community-scale builders within the hot-humid climate zone to improve performance of production-, or community-scale, h...

Beal, D. et al University of Central Florida Florida Solar Energy Center

Apr 27, 2016
9 Resources
0 Stars
Publicly accessible

Simulations of Brady's-Type Fault Undergoing CO2 Push-Pull: Pressure-Transient and Sensitivity Analysis

Input and output files used for fault characterization through numerical simulation using iTOUGH2. The synthetic data for the push period are generated by running a forward simulation (input parameters are provided in iTOUGH2 Brady GF6 Input Parameters.txt [InvExt6i.txt]). In gene...

Jung, Y. and Doughty, C. Lawrence Berkeley National Laboratory

Mar 09, 2018
11 Resources
0 Stars
Publicly accessible

Triton-C Point Absorber Preliminary System Design Package

Preliminary System Design Package for the Triton-C WEC, including a report and CAD drawings pertaining to the overall preliminary design, system arrangement, surface float hull, and surface float arrangement.

Mundon, T. Oscilla Power, Inc.

Dec 01, 2017
4 Resources
0 Stars
Publicly accessible

<< Previous 6 7 8 9 10 11 12 13 14 15 Next >>