Search OEDI Data

Showing results 76 - 100 of 344.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Research Areas
Accessibility
Data Type
Organization
Source
"High temperature chemical sensing tool"×
Archive×

Desert Peak Geodatabase for Geothermal Exploration Artificial Intelligence

These files contain the geodatabases related to the Desert Peak Geothermal Field. It includes all input and output files used in the project. The files include data categories of raw data, pre-processed data, and analysis (post-processed data). In each of these categories there ar...
Moraga, J. et al Colorado School of Mines
Apr 27, 2021
3 Resources
0 Stars
Publicly accessible

NREL Geothermal GIS Data

This dataset is a qualitative assessment of geothermal potential for the U.S. using Enhanced Geothermal Systems (EGS) and based on the levelized cost of electricity with CLASS 1 being most favorable and CLASS 5 being least favorable. This dataset does not include shallow EGS resou...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Jan 16, 2015
1 Resources
0 Stars
In curation

Deep Direct-Use Feasibility Study Numerical Modeling and Uncertainty Analysis using iTOUGH2 for West Virginia University

To reduce the geothermal exploration risk, a feasibility study is performed for a deep direct-use system proposed at the West Virginia University (WVU) Morgantown campus. This study applies numerical simulations to investigate reservoir impedance and thermal production. Because of...
Garapati, N. et al West Virginia University
Dec 20, 2019
13 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE Digital Elevation Model and Geology Shapefiles

Geologic ArcGIS data of West Flank Coso, Ca FORGE site from a unpublished map by Rich Whitmarsh. The zip file includes a DEM, hillshade and four shapefiles of the general outlines of FORGE area.
Blankenship, D. Sandia National Laboratories
Dec 21, 2015
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Area Terrain Slope Data

This archive contains a terrain slope image, in units of degrees, of the Utah FORGE area near Roosevelt Hot springs. The data was derived from 0.5 m resolution LiDAR DEM data and is in a GeoTiff format. It was processed using ArcGIS.
Nash, G. Energy and Geoscience Institute at the University of Utah
Dec 10, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 2C Topical Report

This is the topical report that wraps up the work and results achieved during Utah FORGE Phase 2C. The zip file includes several folders containing (1) an overview; (2) the results; (3) the lessons learned; and (4) the conclusions. It also contains a folder containing appendices i...
Moore, J. et al Energy and Geoscience Institute at the University of Utah
Dec 11, 2019
2 Resources
0 Stars
Publicly accessible

Oilwell Conversion (Well API 121913310501) to Geothermal Heat Storage Well for Flexible Electricity Storage

Geothermal growth is limited by a lack of geographically dispersed high-temperature thermal resources and high initial upfront investment in characterization and well construction. This project intended to address the challenges of energy supply intermittency and enhance grid resi...
Malkewicz, N. et al University of Illinois
May 05, 2021
8 Resources
0 Stars
Publicly accessible

Fracture Sustainability Test, Pre and Post-Test Photomicrographs

The primary objective of this research is to understand how different rock types, mineral and fluid compositions, and fracture surface textures determine the longevity of fracture apertures, so that selection of reservoir rock can be economically optimized to reduce future refract...
Dobson, P. et al Lawrence Berkeley National Laboratory
Sep 26, 2016
9 Resources
0 Stars
Publicly accessible

Ocean Thermal Energy Conversion (OTEC) Net Power (Summer Average)

This shapefile represents seasonal summer average net power estimates. The OTEC Plant model predicts the net power production at a specific location, given three inputs: surface temperature (°C), depth (m), and difference between warm surface water temperature and cold deep se...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) Net Power (Winter Average)

This shapefile represents seasonal winter average net power estimates. The OTEC Plant model predicts the net power production at a specific location, given three inputs: surface temperature (°C), depth (m), and difference between warm surface water temperature and cold deep se...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Utah FORGE: InSAR Data

This is the InSAR dataset used in Utah FORGE Phase 2C to augment ground deformation monitoring. It is accompanied by a README.txt file which contains an explanation of the data in the .zip archive.
Feigl, K. et al Energy and Geoscience Institute at the University of Utah
Jul 01, 2019
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Area LiDAR Bare Earth DEM Mosaic

This is a mosaic of 154 bare earth DEM panels (0.5 m resolution) acquired during Phase II of the Utah FORGE project. The DEM covers the western Mineral Mountains and adjoining basin including the Roosevelt Hot Springs area. The coordinates are in UTM Zone 12, NAD 83 and elevation ...
Nash, G. Energy and Geoscience Institute at the University of Utah
Aug 07, 2018
1 Resources
0 Stars
Publicly accessible

Ocean Thermal Energy Conversion (OTEC) Net Power (Annual Average)

This shapefile represents annual average net power estimates. The OTEC Plant model predicts the net power production at a specific location, given three inputs: surface temperature (°C), depth (m), and difference between warm surface water temperature and cold deep sea water t...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Utah FORGE: Phase 3 InSAR Study Results

Ground movement is evaluated through analysis of Interferometric Synthetic Aperture Radar (InSAR) interferograms. Results indicate there has been no detectable ground movement at millimeter scale. The zipped file in this submission contains a report, maps, and results from the InS...
Feigl, K. and Batzli, S. Department of Geoscience University of Wisconsin-Madison
Sep 24, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Seismic and Other Shapefiles from the Roosevelt Hot Springs Area

Three shapefiles in this submission show the position of proposed seismic line surveys. The mid-crustal velocity anomaly file shows the extent of an anomalously low P-wave velocity zone in the subsurface. Two other files show the extent of known hydrothermal systems in the Rooseve...
Moore, J. Energy and Geoscience Institute at the University of Utah
Mar 22, 2016
7 Resources
0 Stars
Publicly accessible

Utah FORGE: GPS Data Deformation Monitoring

This data bundle contains raw GPS data files and resulting data using Trimble Business Center and NOAA OPUS to process the GPS data in spreadsheets with station coordinates and elevations. A map of station locations is included along with the final processing report which includes...
Erickson, B. and McKean, A. Energy and Geoscience Institute at the University of Utah
Jun 24, 2019
2 Resources
0 Stars
Publicly accessible

Greenbelt Homes Pilot Program: Summary of Building Envelope Retrofits, Planned HVAC Equipment Upgrades, and Energy Savings

In fall 2010, Greenbelt Homes, Inc. (GHI) a 1,566-home cooperative of circa 1930-1940 homes in Greenbelt, Maryland, undertook a multiyear pilot energy efficiency retrofit project. GHI established this pilot project as a basis for decision making for the rollout of a decade-long co...
Mallay, D. et al Home Innovation Research Labs National Association of Home Builders
Jul 21, 2016
4 Resources
0 Stars
Publicly accessible

Performance Data from a 1-Meter Cross-flow Turbine with High Deflection Hydrofoils

Performance data of a 1-meter diameter cross-flow tidal turbine consisting of three NACA 0018 blades with two support struts with high deflection hydrofoils. Data was collected at the University of New Hampshire Jere A. Chase Ocean Engineering Lab within the tow tank. Three turbin...
Marone, N. et al University of New Hampshire, Atlantic Marine Energy Center (AMEC)
Jul 21, 2021
2 Resources
0 Stars
Publicly accessible

Rhode Island High Resolution Wind Resource

Annual average wind resource potential for the state of Rhode Island at a 50 meter height. This data set has been validated by NREL and wind energy meteorological consultants. *Note*: This data is not suitable for micro-siting potential development projects. This shapefile was ...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
3 Resources
0 Stars
In curation

Hydrothermal mineral alterations in the Brady and Desert Peak geothermal fields

Results of the analysis of HyMap's spectra against know hydrothermally altered minerals in the Brady-Desert Peak Geothermal Areas. The analysis was performed using ENVI's Target Detection process against USGS library spectra for Chalcedony, Kaolinite, Gypsum, Hematite and Epsomite...
Moraga, J. Colorado School of Mines
Oct 01, 2021
4 Resources
0 Stars
Publicly accessible

Appalachian Basin Play Fairway Analysis: Revised 2016 Combined Risk Factor Analysis

This submission contains information used to compute the combined risk factors for deep geothermal energy opportunities in the Appalachian Basin, in the context of a the Play Fairway Analysis project. The risk factors are sedimentary rock reservoir quality, thermal resource qualit...
E., T. Cornell University
Nov 15, 2016
2 Resources
0 Stars
Publicly accessible

Iowa High Resolution Wind Resource

Annual average wind resource potential for the state of Iowa at a 50 meter height. This data set has been validated by NREL and wind energy meteorological consultants. *Note:* This data is not suitable for micro-siting potential development projects. This shapefile was generate...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
3 Resources
0 Stars
In curation

Snake River Plain FORGE: Site Characterization Data

The site characterization data used to develop the conceptual geologic model for the Snake River Plain site in Idaho, as part of phase 1 of the Frontier Observatory for Research in Geothermal Energy (FORGE) initiative. This collection includes data on seismic events, groundwater,...
Moos, D. and Barton, C. Idaho National Laboratory
Apr 18, 2016
49 Resources
0 Stars
Publicly accessible

Illinois High Resolution Wind Resource

Annual average wind resource potential of Illinois at a 50 meter height. This data set was produced and validated by NREL using their WRAM model. This shapefile was generated from a raster dataset with a 1000 m resolution, in a Transverse Mercator projection with the following ...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
3 Resources
0 Stars
In curation

Catalyst Design in Nitrate Removal

Based on the volcano plot developed by Dr. Goldsmith group (Report linked in submission), we utilized DFT (density functional theory) calculations to search for bimetallic materials in the application of catalysts in aqueous nitrate removal. The calculations are conducted via the ...
Wang, D. and Jain, A. Lawrence Berkeley National Laboratory
Dec 01, 2021
7 Resources
0 Stars
Publicly accessible
<< Previous12345678Next >>