Search OEDI Data

Showing results 51 - 75 of 480.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Research Areas
Accessibility
Data Type
Organization
Source
"significant wave height"×
Downloadable×

Wind Turbine Transmission Setbacks: Ordinances (2022) and Extrapolated Trends, 115 Hub Height 170 Rotor Diameter

This dataset represents wind energy setback requirements from transmission based on existing county ordinances as of April 2022. A setback requirement is a minimum distance from transmission infrastructure that an energy project may be developed, and these varied widely across the...
Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)
Jan 01, 2024
5 Resources
0 Stars
Publicly accessible

Wind Turbine Structure Setbacks: Ordinances (2022) and Extrapolated Trends, 115 Hub Height 170 Rotor Diameter

This dataset represents wind energy setback requirements from structures based on existing county ordinances as of April 2022. A setback requirement is a minimum distance from a structure that an energy project may be developed, and these varied widely across the counties in which...
Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)
Jan 01, 2024
5 Resources
0 Stars
Publicly accessible

Bias Corrected Near-Surface Wind Data for Solar Field Siting

This dataset catalogs a long-term high-resolution data set characterizing the near-surface hourly wind speed variations at two solar sites in the Southwest U.S. This dataset demonstrates the potential for integrating improved near-surface wind data into CST and PV planning tools f...
Emes, M. et al National Laboratory of the Rockies (NLR)
Jun 12, 2026
2 Resources
0 Stars
Publicly accessible

Wind Turbine Water Setbacks: Ordinances (2022) and Extrapolated Trends, 115 Hub Height 170 Rotor Diameter

This dataset represents wind energy setback requirements from water based on existing county ordinances as of April 2022. A setback requirement is a minimum distance from water that an energy project may be developed, and these varied widely across the counties in which they exist...
Geospatial Data Science, N. and Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)
Jan 01, 2024
5 Resources
0 Stars
Publicly accessible

Ocean Thermal Energy Conversion (OTEC) Datasets

The data presented here were collected from the Ocean Thermal Extractable Energy Visualization (OTEEV) project. The OTEEV project focused on assessing the Maximum Practicably Extractable Energy (MPEE) from the world's ocean thermal resources. This project explored the feasibili...
Langle, N. et al National Renewable Energy Laboratory
Nov 25, 2014
10 Resources
0 Stars
Publicly accessible

Geomechanical Modeling for Thermal Spallation Drilling

Wells for Engineered Geothermal Systems (EGS) typically occur in conditions presenting significant challenges for conventional rotary and percussive drilling technologies: granitic rocks that reduce drilling speeds and cause substantial equipment wear. Thermal spallation drilling,...
Walsh, S. et al Lawrence Livermore National Laboratory
Aug 24, 2011
1 Resources
0 Stars
Publicly accessible

Assessing REE Concentrations in Geothermal and Oil and Gas Produced Waters: A Potential Domestic Source of Strategic Mineral Commodities

The project team collected and analyzed 224 water samples and 101 matching rock samples. INL's improved method of measuring aqueous REEs allows study of samples previously thought too volume limited to measure. The study found that aqueous REEs occur at trace levels in all analyz...
Quillinan, S. et al University of Wyoming
Mar 08, 2019
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Native State Model 2022 Update

This is the Phase 3 native state model update. The Phase 3 numerical model represents a significant subsurface volume below the FORGE site footprint. The model domain of 4.0 km x 4.0 km x 4.2 km is located approximately between depths of 4000 to 4200 meters below land surface. Thi...
Podgorney, R. and Liu, R. Idaho National Laboratory
Jul 29, 2022
1 Resources
0 Stars
Publicly accessible

Annual Average Modeled Wind Speed for Puerto Rico and the Virgin Islands

Shapefiles of annual average modeled wind speed for Puerto Rico and the Virgin Islands at 70 and 100 m hub heights. These shapefiles were generated from a raster dataset with a 200 m resolution, in a UTM zone 19, datum WGS 84 projection system. This is supplemental data to the 50 ...
Heimiller, D. National Renewable Energy Laboratory
Nov 25, 2014
6 Resources
0 Stars
Publicly accessible

Development of a Downhole Tracer and pH Measurement Instrument for Application in Geothermal Wells

Due the high temperature and pressure conditions found in geothermal wells, tracer studies designed to elucidate properties of geothermal reservoirs are traditionally conducted by pulling liquid samples from the wellhead. These samples are then sent off for analysis in a fixed lab...
Hess, R. et al Sandia National Laboratories
Sep 11, 2013
1 Resources
0 Stars
Publicly accessible

NREL Global Offshore Wind GIS Data

GIS data for offshore wind speed (meters/second) at a 90 meter height above surface level. The data is specified to Exclusive Economic Zones (EEZ). The wind resource is based on NOAA Blended Sea Winds and monthly wind speed at 30km resolution from 1987-2005, using a 0.11 wind shea...
Langle, N. and Heimiller, D. National Renewable Energy Laboratory
Nov 25, 2014
5 Resources
0 Stars
Publicly accessible

TEAMER: Cross-flow Turbine Hydrodynamics

The objective of this work is to validate RANS and LES computations of cross-flow turbine hydrodynamics using laboratory scale measurements. Validation involves the comparison of time-and phase averaged performance metrics and flowfields across the widest practical range of turbin...
Athair, A. et al University of Washington (NNMREC)
Mar 25, 2025
7 Resources
0 Stars
Publicly accessible

U.S. Great Lakes Offshore Windspeed 90m Height High Resolution

The data here provide an estimate of annual average wind speed at 90 meter height above surface for specific offshore regions of the United States. This dataset is a geographic shapefile generated from the original raster data. The original raster data resolution is a 200-meter ce...
Heimiller, D. et al National Renewable Energy Laboratory
Nov 25, 2014
5 Resources
0 Stars
Publicly accessible

U.S. Hawaii Offshore Windspeed 90m Height High Resolution

The data here provide an estimate of annual average wind speed at 90 meter height above surface for specific offshore regions of the United States. This dataset is a geographic shapefile generated from the original raster data. The original raster data resolution is a 200-meter ce...
Heimiller, D. et al National Renewable Energy Laboratory
Nov 25, 2014
5 Resources
0 Stars
Publicly accessible

U.S. Pacific Coast Offshore Windspeed 90m Height High Resolution

The data here provide an estimate of annual average wind speed at 90 meter height above surface for specific offshore regions of the United States. This dataset is a geographic shapefile generated from the original raster data. The original raster data resolution is a 200-meter ce...
Heimiller, D. et al National Renewable Energy Laboratory
Nov 25, 2014
5 Resources
0 Stars
Publicly accessible

U.S. Gulf of Mexico Coast Offshore Windspeed 90m Height High Resolution

The data here provide an estimate of annual average wind speed at 90 meter height above surface for specific offshore regions of the United States. This dataset is a geographic shapefile generated from the original raster data. The original raster data resolution is a 200-meter ce...
Heimiller, D. et al National Renewable Energy Laboratory
Nov 25, 2014
5 Resources
0 Stars
Publicly accessible

CO2 Push-Pull Dual (Conjugate) Faults Injection Simulations

This submission contains datasets and a final manuscript associated with a project simulating carbon dioxide push-pull into a conjugate fault system modeled after Dixie Valley- sensitivity analysis of significant parameters and uncertainty prediction by data-worth analysis. Datas...
Oldenburg, C. et al Lawrence Berkeley National Laboratory
Jul 20, 2017
2 Resources
0 Stars
Publicly accessible

Adsorption Heat Pump Coatings Investigation

In this study, a theoretical investigation was made to predict the performances of zeolite Y and SAPO-34 coatings for an adsorption cooling system operated by waste heat, under various conditions. A mathematical model developed and tested previously for coatings of A and X type ze...
Tatlier, M. Istanbul Technical University
May 22, 2020
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3A Year 1 Annual Report for 2020

This is the Utah FORGE annual report for Phase 3A year 1, which was completed on December 28th, 2020. This report includes site infrastructure, site operations, seismic monitoring, a conceptual geological model, outreach, and communications for the Utah FORGE project during Phase ...
Moore, J. et al Energy and Geoscience Institute at the University of Utah
Dec 28, 2020
1 Resources
0 Stars
Publicly accessible

Admiralty Inlet Hub-Height Turbulence Measurements from June 2012

This data is from measurements at Admiralty Head, in Admiralty Inlet. The measurements were made using an IMU equipped ADV mounted on a mooring, the 'Tidal Turbulence Mooring' or 'TTM'. The inertial measurements from the IMU allows for removal of mooring motion in post processing....
Kilcher, L. National Renewable Energy Laboratory
Jun 18, 2012
7 Resources
0 Stars
Publicly accessible

Wind Turbine Oil and Gas Pipeline Setbacks: Ordinances (2022) and Extrapolated Trends, 115 Hub Height 170 Rotor Diameter

This dataset represents wind energy setback requirements from oil and gas pipelines. A setback requirement is a minimum distance from a pipeline that an energy project may be developed. As of April 2022, no ordinances were discovered for any counties. Such ordinances are likely to...
Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)
Jan 01, 2024
3 Resources
0 Stars
Publicly accessible

Development of a Neutron Diffraction Based Experimental Capability for Investigating Hydraulic Fractures for EGS-like Conditions

Understanding the relationship between stress state, strain state and fracture initiation and propagation is critical to the improvement of fracture simulation capability if it is to be used as a tool for guiding hydraulic fracturing operations. The development of fracture predict...
Polsky, Y. et al Oak Ridge National Laboratory
Feb 01, 2013
1 Resources
0 Stars
Publicly accessible

Literature Data on Foam Fracturing Fluid

At the beginning of this project, the Temple team spent significant effort to collect data relevant to foam fracturing. More than 40 articles/reports were found in the open literature that reported the properties of aqueous foams under various testing conditions. The foam properti...
Thakor, V. et al Temple University
Nov 08, 2021
2 Resources
0 Stars
Publicly accessible

M3 Wave DMP/APEX WEC Laboratory Testing Content Model

Laboratory Testing for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX." Content Model of 1:5 testing of thirteen different APEX I and APEX II configurations in the Hinsdale Long Wave Flume with a 0.5m deep sediment bed and under 4 different wa...
Morrow, M. and Delos-Reyes, M. M3 Wave
Sep 20, 2017
1 Resources
0 Stars
Publicly accessible

Wave Energy Prize 1/50th Testing M3 Wave Submerged Mid-Column Pressure Differential WEC

This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the M3 Wave team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized ...
Scharmen, W. Ricardo Detroit Technical Center
Jan 08, 2016
10 Resources
0 Stars
Publicly accessible
<< Previous1234567Next >>