Search OEDI Data

LandRAY PTO Test Plans with NREL NWTC 5 MW Dynamometer

The overarching project objective is to demonstrate the feasibility of using an innovative PowerTake-Off (PTO) Module in Columbia Power's utility-scale wave energy converter (WEC). The PTO Module uniquely combines a large-diameter, direct-drive, rotary permanent magnet generator; ...

Prudell, J. et al Columbia Power Technologies, Inc.

Feb 29, 2016
5 Resources
0 Stars
Publicly accessible

Ocean Thermal Energy Conversion (OTEC) Plant Spacing Estimates

This shapefile represents estimated plant spacing distances. The estimates shown here were obtained considering the availability of cold water at a particular location based on two criteria, the deep-water velocities from HYCOM and a layer-depth constraint estimated from the gl...

Langle, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) Sea Surface Temperature (Annual Average)

This shapefile represents annual average sea surface temperature recordings. The sea surface temperature is the temperature of the warm water source used by an OTEC plant. This is defined to be near the sea surface at a depth of 20 m, the approximate depth of a warm water intak...

Langle, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) Sea Surface Temperature (Summer Average)

This shapefile represents seasonal summer average sea surface temperature recordings. The sea surface temperature is the temperature of the warm water source used by an OTEC plant. This is defined to be near the sea surface at a depth of 20 m, the approximate depth of a warm wa...

Langle, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) Sea Surface Temperature (Winter Average)

This shapefile represents seasonal winter average sea surface temperature recordings. The sea surface temperature is the temperature of the warm water source used by an OTEC plant. This is defined to be near the sea surface at a depth of 20 m, the approximate depth of a warm wa...

Langle, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) Net Power (Summer Average)

This shapefile represents seasonal summer average net power estimates. The OTEC Plant model predicts the net power production at a specific location, given three inputs: surface temperature (°C), depth (m), and difference between warm surface water temperature and cold deep se...

Langle, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) Net Power (Winter Average)

This shapefile represents seasonal winter average net power estimates. The OTEC Plant model predicts the net power production at a specific location, given three inputs: surface temperature (°C), depth (m), and difference between warm surface water temperature and cold deep se...

Langle, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 14ºC (Annual Average)

This shapefile represents the annual average depth profile to reach water at a temperature of 14ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer t...

Langle, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 14ºC (Summer Average)

This shapefile represents the seasonal summer depth profile to reach water at a temperature of 14ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer ...

Langle, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 14ºC (Winter Average)

This shapefile represents the seasonal winter depth profile to reach water at a temperature of 14ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer ...

Langle, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 20ºC (Annual Average)

This shapefile represents the annual average depth profile to reach water at a temperature of 20ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer t...

Langle, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 20ºC (Summer Average)

This shapefile represents the seasonal summer depth profile to reach water at a temperature of 20ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer ...

Langle, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 20ºC (Winter Average)

This shapefile represents the seasonal winter depth profile to reach water at a temperature of 20ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer ...

Langle, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 8ºC (Annual Average)

This shapefile represents the annual average depth profile to reach water at a temperature of 8ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer th...

Langle, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 8ºC (Summer Average)

This shapefile represents the seasonal summer depth profile to reach water at a temperature of 8ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer t...

Langle, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 8ºC (Winter Average)

This shapefile represents the seasonal winter depth profile to reach water at a temperature of 8ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer t...

Langle, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Reference Model 5 Full Scale Geometry (RM5: Oscillating Surge Flap)

Contains the Reference Model 5 (RM5) full scale geometry files of the Oscillating Surge Flap, developed by the Reference Model Project (RMP). These full scale geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. This data was gen...

Neary, V. et al Sandia National Laboratories

Sep 30, 2014
5 Resources
0 Stars
Publicly accessible

Flow Redirection and Induction in Steady State (FLORIS) Wind Plant Power Production Data Sets

This dataset contains turbine and plant-level power outputs for 252,500 cases of diverse wind plant layouts operating under a wide range of yawing and atmospheric conditions. The power outputs were computed using the Gaussian wake model in NREL's FLOw Redirection and Induction in ...

Ramos, D. et al National Renewable Energy Laboratory

Feb 12, 2021
5 Resources
0 Stars
Publicly accessible

High Resolution Ocean Surface Wave Hindcast (US Wave) Data

The development of this dataset was funded by the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, Water Power Technologies Office to improve our understanding of the U.S. wave energy resource and to provide critical information for wave energy project de...

Yang, Z. et al National Renewable Energy Laboratory

Jul 01, 2020
6 Resources
0 Stars
Publicly accessible

CalWave xWave New Technology Qualification and Path to Certification Final Report

Final report including results and conclusions of the New Technology Qualification (NTQ) review of CalWave Power Technologies Inc's xWave technology, performed by American Bureau of Shipping.

Petcovic, D. and Zhang, S. CalWave Power Technologies Inc.

Oct 31, 2022
1 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: Petrographic and X-Ray Diffraction Analyses for Samples

XRD and Petrographic Study for wells 83-11 33A-7 and 33A-7RD-1 West Flank FORGE. Work and report completed by Clay Jones and Joseph Moore at the Energy and Geoscience Institute (EGI) in 2011.

Jones, C. and Moore, J. Sandia National Laboratories

May 16, 2016
1 Resources
0 Stars
Publicly accessible

Long-term Average Surface Temperatures in England (1772 2009)

This dataset, made available by the UK Department of Energy and Climate Change (DECC), shows the difference between the yearly central England temperature for years 1772 through 2009 and the 1961 1990 baseline (1961 1990 Central England average after smoothing). It also shows the ...

Hallett, K. and (DECC), U. National Renewable Energy Laboratory

Mar 11, 2010
2 Resources
0 Stars
In curation

ALFA Wave Resource Characterization in Extreme Conditions, Offshore of Newport, OR

Model hindcast and Surface Wave Instrument Float With Tracking (SWIFT) buoy observations during extreme conditions offshore of Newport, OR

Thomson, J. Northwest National Marine Renewable Energy Center

Dec 06, 2015
2 Resources
0 Stars
Publicly accessible

Oilwell Conversion (Well API 121913310501) to Geothermal Heat Storage Well for Flexible Electricity Storage

Geothermal growth is limited by a lack of geographically dispersed high-temperature thermal resources and high initial upfront investment in characterization and well construction. This project intended to address the challenges of energy supply intermittency and enhance grid resi...

Malkewicz, N. et al University of Illinois

May 05, 2021
8 Resources
0 Stars
Publicly accessible

WaterTAP3 Model Input Data for NAWI's Eight Source Water Baseline Analyses

This folder contains the input data for the WaterTAP3 model that was used for the eight NAWI (National Alliance for Water Innovation) source water baselines studies published in the Environmental Science and Technology special issue: Technology Baselines and Innovation Priorities ...

Miara, A. et al National Renewable Energy Laboratory

Feb 01, 2022
16 Resources
0 Stars
Publicly accessible

<< Previous 12 13 14 15 16 17 18 19 20 21 Next >>