Search OEDI Data

Utah FORGE 2439: Machine Learning for Well 16A(78)-32 Stress Predictions September 2023 Report

This task completion report documents the development and implementation of machine learning (ML) models for the prediction of in-situ vertical (Sv), minimum horizontal (SHmin) and maximum horizontal (SHmax) stresses in well 16A(78)-32. The detailed description of the experimental...

Mustafa, A. et al Battelle Memorial Institute

Sep 28, 2023
3 Resources
0 Stars
Publicly accessible

Remote Sensing and Geology of Glass Buttes, Oregon

This data set includes Light Detection and Ranging (LiDAR) data, a remote sensing processing report, and a geologic map of the Glass Buttes study area for ORMAT. The total area flown for the LiDAR remote sensing was 86,631 acres to fully encompass the area of interest (84,849 ac...

Akerley, J. et al Ormat Nevada Inc

Jun 21, 2010
3 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Numerical Modeling of Energized Steel-Casing Source for Imaging Stimulated Zone

This short report details and tests the workflow that will be used to simulate steel well casings in deviated production/extraction boreholes at at the Utah FORGE site. Boreholes will be electrically energized and will serve as data sources for future proposed electromagnetic bore...

Um, E. et al Lawrence Berkeley National Laboratory

Nov 15, 2022
4 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Meteorological Data During 2023 Completion/Circulation

This preliminary data archive includes meteorological data recorded at the Utah FORGE facility over the period of time including the completion/cementing of well 16B(78)-32 and the initial 2023 circulation test, largely occurring in June/July/August of 2023. This information may p...

Ajo-Franklin, J. Rice University

Jun 10, 2024
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Triaxial Direct Shear Results February 2025

This dataset contains results from nine triaxial direct shear tests conducted by Los Alamos National Laboratory on samples from FORGE Well 16A(78)-32. The primary objectives of this work were to determine the shear strength in both intact and residual states, evaluate dilation aga...

Frash, L. et al Los Alamos National Laboratory

Feb 28, 2025
1 Resources
0 Stars
Publicly accessible

INTEGRATE Inverse Network Transformations for Efficient Generation of Robust Airfoil and Turbine Enhancements

The INTEGRATE (Inverse Network Transformations for Efficient Generation of Robust Airfoil and Turbine Enhancements) project is developing a new inverse-design capability for the aerodynamic design of wind turbine rotors using invertible neural networks. This AI-based design techno...

Vijayakumar, G. et al National Renewable Energy Laboratory (NREL)

May 04, 2021
8 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Meteorological Data During 2024 Stimulation

This preliminary data archive includes meteorological data recorded at the Utah FORGE facility over the period of time including the 16A/16B stimulation activities, largely March/April/May of 2024. This information may prove useful for understanding seismic and other instrumentati...

Ajo-Franklin, J. Rice University

May 09, 2024
5 Resources
0 Stars
Publicly accessible

2018 Industrial Energy Data Book

The Industrial Energy Data Book (IEDB) aggregates and synthesizes information on the trends in industrial energy use, energy prices, economic activity, and water use. The IEDB also estimates county-level industrial energy use and combustion energy use of large energy-using facilit...

McMillanNational Renewable Energy Laboratory

Nov 14, 2019
4 Resources
0 Stars
Publicly accessible

Active Source 3D Seismic Tomography of Brady Hot Springs Geothermal Field, Nevada

We deployed a dense seismic array to image the shallow structure in the injection area of the Brady Hot Springs geothermal site in Nevada. The array was composed of 238 5 Hz, three-component nodal instruments and 8,700 m of distributed acoustic sensing (DAS) fiber-optic cable inst...

Parker, L. University of Wisconsin

Aug 09, 2017
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1 Stimulation Data

Stimulation data from Experiment 1 of EGS Collab, which occurred on the 4850 ft level of the Sanford Underground Research Facility (SURF). A detailed description of the stimulation data is provided in the StimulationDataNotes.docx and is also available on the EGS Collab Wiki. A M...

Knox, H. et al Pacific Northwest National Laboratory

Aug 13, 2020
6 Resources
0 Stars
Publicly accessible

Shallow (2-meter) Temperature Surveys in Colorado

Shallow temperature surveys are useful in early-stage geothermal exploration to delineate surface outflow zones, with the intent to identify the source of upwelling, usually a fault. Detailed descriptions of the 2-meter survey method and equipment design can be found in Coolbaugh ...

E., R. Flint Geothermal, LLC

Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: 3D Temperature Model

x,y,z data of the 3D temperature model for the West Flank Coso FORGE site. Model grid spacing is 250m. The temperature model for the Coso geothermal field used over 100 geothermal production sized wells and intermediate-depth temperature holes. At the near surface of this model,...

Blankenship, D. Sandia National Laboratories

Mar 01, 2016
1 Resources
0 Stars
Publicly accessible

Deep Direct-Use Feasibility Study Energy Demand Characterization and Surface Plant Modeling for West Virginia University

This dataset provides information gathered to determine end use load and assessment of existing district heating systems (DHS). It also provides Aspen simulation files used to model hybrid natural gas geothermal district heating and cooling (GDHC) system along with Exchange Design...

Garapati, N. West Virginia University

Jan 09, 2020
4 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Modeling Studies of Energized Steel-Casing Source EM Method for Detecting Stimulated Zone

Numerical modeling Studies for electromagnetic (EM) Data Acquisition Survey Design this milestone report describes the 3D modeling studies of energized steel-casing source electromagnetic method for detecting stimulated zone at the Utah FORGE Site. FORGE project 3-2535 is planning...

Um, E. et al Lawrence Berkeley National Laboratory

Feb 06, 2023
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Southwestern Utah Magnetotelluric (MT) Data

This comprehensive magnetotellurics (MT) dataset, which covers southwestern Utah, integrates 600 sites from various surveys, including those from the Utah FORGE, SubTER, and Play Fairway projects, all of which are linked below. The core of this dataset is the use of a 3D finite el...

Wannamaker, P. and Marris, V. Energy and Geoscience Institute at the University of Utah

Jan 22, 2024
4 Resources
0 Stars
Publicly accessible

Availability Estimates of Low-Cost, Dispatch-Constrained Electricity (LDE)

This dataset accompanies the report "Potential Availability of and Supply Curves for Low-Cost, Dispatch-Constrained Electricity", which provides initial estimates of the quantity and availability of the potential low-cost, dispatch-constrained electricity (LDE) resource in the Uni...

Ruth. . et al National Renewable Energy Laboratory

Feb 20, 2023
5 Resources
0 Stars
Publicly accessible

GeoDAWN Northwestern Elko County Nevada EarthMRI Data

This submission includes both the original product resolution (OPR) and LiDAR point cloud (LPC) LiDAR data collected as part of GeoDAWN: Geoscience Data Acquisition for Northwestern Elko County, Nevada. The USGS Earth Mapping Resources Initiative (EarthMRI) and USGS 3D Elevation ...

National Geospatial Program, U. United States Geological Survey

May 15, 2023
7 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Time-series geochemistry data of the long-term circulation test

This submission presents the weekly geochemistry data of the long-term flow test performed within EGS Collab Experiment 1 from early 2019 to early 2020. The fluids from each producing borehole/interval (PI, PB, PDT and PST) along with the injectate were sampled roughly weekly from...

Zhang, Y. et al Stanford University

Jan 01, 2022
4 Resources
0 Stars
Publicly accessible

Slip and Dilation Tendency Analysis of the Patua Geothermal Area

Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip or to dilate provides an indication of which faults or fault segments within a geothermal system are critically st...

E., J. University of Nevada

Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

Exploration for Blind Geothermal Resources in the State of Hawaii Utilizing Dissolved Noble Gasses in Well Waters

This study is an extension of the Hawaii Play Fairway Analysis (PFA), a statewide geothermal exploration project funded by the United States Department of Energy. Based on results from prior phases of the PFA, this project targeted 66 wells on the islands of Hawaii, Maui, Lanai, O...

Ferguson, C. University of Hawaii

Nov 01, 2020
4 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Material Characterization Program

The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power system consists of three major subsystems: shore-side power electronics, mooring system, and turbine generator unit (TGU...

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439v2: Report on Predicting Far-Field Stresses Using Finite Element Modeling and Near-Wellbore Machine Learning for Well 16A(78)-32

This report presents the far-field stress predictions at two locations along the vertical section of Utah FORGE Well 16A (78)-32 using a physics-based thermo-poro-mechanical model. Three principal stresses in far-field were obtained by solving an inverse problem based on the near-...

Lu, G. et al University of Pittsburgh

Aug 30, 2024
2 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements

The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...

Alumbaugh, D. et al Lawrence Berkeley National Laboratory

Dec 01, 2022
5 Resources
0 Stars
Publicly accessible

Photovoltaic Module Current-Voltage and Electroluminescence Image Data (PV-IV-EL)

This dataset consists of 613 sets of corresponding current-voltage trace (IV) flash test data and electroluminescence (EL) image data for commercial PV modules from the Photovoltaic Systems Evaluation Laboratory at Sandia National Laboratories. PV modules are from fielded systems ...

Byford, B. et al Sandia National Laboratories

Dec 15, 2015
5 Resources
0 Stars
Publicly accessible

NREL GIS Data: Seasonal and diurnal data from Afghanistan surface weather stations

This dataset was developed by the National Renewable Energy Laboratory (NREL) for the [U.S. Agency for International Development'](http://www.usaid.gov/)s (USAID) [South Asia Regional Initiative for Energy Cooperation](http://www.sari-energy.org) (SARI/E). The dataset contains gra...

Langle, N. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>