Search OEDI Data

National Marine Renewable Energy Center Upgrades LUPA

The data provided is part of a power take off damping optimization study. The power take off damping coefficient was swept from 0 to approximately 7000 N/m/s during a single regular wave test with a real time control of the motor/generator. The generated power from the LUPA (Lab U...

Robertson, B. et al Oregon State University

Oct 12, 2022
5 Resources
0 Stars
Publicly accessible

Drifting Acoustic Measurements around C-Power's SeaRay WEC

The repository contains underwater noise measurements and associated metadata collected around C-Power's SeaRay wave energy converter on July 15, 2024 and July 16, 2024 while it was deployed at the U.S. Navy's Wave Energy Test Site (WETS) in Kaneohe, HI. Measurements were obtained...

Polagye, B. et al University of Washington

Jul 16, 2024
2 Resources
0 Stars
Publicly accessible

G-Function Library for Modeling Vertical Bore Ground Heat Exchanger

This library contains g-functions (thermal response functions) for standard, regularly spaced vertical borehole ground heat exchangers. In total, it contains 34, 321 configurations. To permit interpolation, each configuration has g-functions for heights of 24, 48, 96, 192, and 384...

Spitler, J. et al Oak Ridge National Laboratory

Jun 30, 2021
10 Resources
0 Stars
Publicly accessible

ALFA Oscillating Water Column Device Testing

Data from Phase 1 testing of a single ALFA Oscillating Water Column (OWC) device at the O.H. Hinsdale Wave Research Laboratory (HWRL) at Oregon State University in Fall of 2016. Contains two zip files of raw data, one of project data, and a diagram of the device with dimensions. ...

Bosma, B. Northwest National Marine Renewable Energy Center

Nov 07, 2016
4 Resources
0 Stars
Publicly accessible

TEAMER: Electrically Engaged Undulation (EEL) System

The Electrically Engaged UnduLation (EEL) system is a buoyancy-driven submersible device for powering oceanographic instruments. Physically, EEL is a slender body whose flexible spine is made up of energy units interconnected by uniaxial hinges. Each unit consists of a pair of pie...

Lu, K. Pyro-E

Dec 01, 2021
2 Resources
0 Stars
Publicly accessible

TEAMER: Numerical Modeling and Optimization of the iProTech Pitching Inertial Pump (PIP) Wave Energy Converter (WEC)

This project focused on developing an automated workflow to evaluate and optimize the iProTech Pitching Inertial Pump (PIP) wave energy converter (WEC) using open-source Python packages and the MATLAB/Simulink tool, WEC-Sim. The process involved parameterizing key design variables...

Wynn, N. et al National Renewable Energy Laboratory

Apr 11, 2024
1 Resources
0 Stars
Publicly accessible

TEAMER: Numerical Model of IProTech PIP WEC Device

iProTech PIP wave energy converter (WEC) is a slack moored, single hull device with no moving parts in the water, joints or bearings. This submission includes data of the simulation, reports, and code for the iProTech PIP (WEC) project. The organization of the data included in the...

Ogden, D. et al IProTech

Nov 02, 2021
2 Resources
0 Stars
Publicly accessible

DEEPEN Leapfrog Geodata Model Cleaned and Reformatted Exploration Datasets from Newberry Volcano

DEEPEN stands for DE-risking Exploration of geothermal Plays in magmatic ENvironments. As part of the DEEPEN 3D play fairway analysis (PFA) conducted at Newberry Volcano for multiple play types (conventional hydrothermal, superhot EGS, and supercritical), existing geoscientific e...

Pauling, H. et al National Renewable Energy Laboratory

Jun 30, 2023
22 Resources
0 Stars
Publicly accessible

DEEPEN: Newberry Volcano MT and Gravity Data 2022 and 2023 Acquisition and Processing

As part of DEEPEN (DE-risking Exploration of geothermal Plays in magmatic ENvironments), a 3D play fairway analysis (PFA) was conducted at Newberry Volcano in Central Oregon for multiple play types (conventional hydrothermal, superhot EGS, and supercritical). For use in this PFA, ...

Shultz, A. et al Enthalpion Energy

Jun 30, 2023
8 Resources
0 Stars
Publicly accessible

HERO WEC 2024 Hydraulic Configuration Deployment Data

The following submission includes raw and processed data from the in water deployment of NREL's Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC), in the form of parquet files, TDMS files, CSV files, bag files and MATLAB workspaces. This dataset was collected...

Jenne, S. et al National Renewable Energy Laboratory

Mar 14, 2024
9 Resources
0 Stars
Publicly accessible

Geothermal Project NEPA Database

During the 2013 fiscal year, the National Renewable Energy Laboratory (NREL) developed the Geothermal National Environmental Policy Act (NEPA) Database with funding provided by the U.S. Department of Energy (DOE) Geothermal Technologies Office (GTO). The information in the databas...

Young, K. and Levine, A. National Renewable Energy Laboratory

Sep 30, 2014
4 Resources
0 Stars
Publicly accessible

Finite Element Analysis (FEA) for Water-Foam Fracturing of Granite Rock

In addition to the foam data that were obtained from literature and that were collected from the current study, simulation data was also generated from finite element analysis (FEA) conducted in this study using COMSOL Multiphysics software. The FEA models were built to simulate t...

Thakor, V. et al Temple University

May 04, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Development of Multi-Stage Fracturing System and Wellbore Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores

This paper discusses the progress on a project funded by the DOE Utah FORGE (Frontier Observatory for Research in Geothermal Energy) for the development of a subsurface heat exchanger for Enhanced Geothermal Systems (EGS) using unique casing sleeves cemented in place and are used ...

Fleckenstein, W. et al Colorado School of Mines

Oct 05, 2022
1 Resources
0 Stars
Publicly accessible

TEAMER: AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Sim Model

Collaborative effort between AquaHarmonics, Sandia National Laboratories (SNL), and the National Renewable Energy Laboratory (NREL) to revise and validate Aquaharmonics' full wave to wire model, allowing for reduced uncertainty and increased understanding of design requirements of...

Tom, N. and Leon, J. AquaHarmonics, Inc.

Dec 31, 2021
6 Resources
0 Stars
Publicly accessible

Hourly Dynamic Line Ratings for Existing Transmission Across the Contiguous United States (Preliminary)

This dataset provides estimated hourly dynamic line ratings for ~84,000 transmission lines across the contiguous United States from 2007-2013. The calculation methods are described in the presentation linked below, and the associated open-source Python code repository is linked in...

Obika, K. et al National Renewable Energy Laboratory

Sep 25, 2024
16 Resources
0 Stars
Publicly accessible

3D Model of the Tuscarora Geothermal Area

The Tuscarora geothermal system sits within a ~15 km wide left-step in a major west-dipping range-bounding normal fault system. The step over is defined by the Independence Mountains fault zone and the Bull Runs Mountains fault zone which overlap along strike. Strain is transferre...

E., J. University of Nevada

Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Groundwater Data

This submission includes two modeled drawdown scenarios with new supply well locations, a total dissolved solids (TDS) concentration grid (raster dataset representing the spatial distribution of TDS), and an excel spreadsheet containing well data.

Moore, J. Energy and Geoscience Institute at the University of Utah

Jul 20, 2016
5 Resources
0 Stars
Publicly accessible

GeoRePORT Case Studies Coso, WSMR, Dixie Valley, and Chena Hot Springs

The Geothermal Resource Portfolio Optimization and Reporting Technique (GeoRePORT) was developed with funding from the U.S. Department of Energy Geothermal Technologies Office to assist in identifying and pursuing long-term investment strategies through the development of a resour...

Kolker, A. et al National Renewable Energy Laboratory

Sep 30, 2019
6 Resources
0 Stars
Publicly accessible

REopt Lite Geothermal Heat Pump Design Requirements

This document describes the design requirements for the geothermal heat pump (GHP) module being added to the existing REopt Lite web tool. This document describes the purpose, users, and functional requirements to which the modified web tool shall conform. This document will be re...

Olis, D. National Renewable Energy Laboratory

Mar 08, 2021
6 Resources
0 Stars
Publicly accessible

Bench Testing Data and Report for an Early Prototype Pitch Resonator WEC

This dataset encompasses data and documentation from bench tests conducted on an early prototype of a "pitch resonator" wave energy converter (WEC). The testing aimed to validate numerical models and reduce risks associated with the pitch resonator concept, which is designed to co...

Coe, R. et al Sandia National Laboratories

Aug 09, 2024
4 Resources
0 Stars
Publicly accessible

Coupling Subsurface and Above-Surface Models for Optimizing the Design of Borefields and District Heating and Cooling Systems

Accurate dynamic energy simulation is important for the design and sizing of district heating and cooling systems with geothermal heat exchange for seasonal energy storage. Current modeling approaches in building and district energy simulation tools typically consider heat conduct...

Hu, J. et al Lawrence Berkeley National Laboratory

Jan 31, 2022
10 Resources
0 Stars
Publicly accessible

In-Situ Blade Strain Measurements of a Crossflow Turbine Operating in a Tidal Flow

This data was collected between October 25 and December 12 of 2022 at the University of New Hampshire (UNH) and Atlantic Marine Energy Center (AMEC) turbine deployment platform (TDP). The goal was to collect blade strain data from a crossflow turbine operating in a tidal flow. A t...

Bharath, A. et al National Renewable Energy Laboratory

Dec 16, 2022
17 Resources
0 Stars
Publicly accessible

National Brackish Groundwater Assessment 2017

Brackish groundwater (BGW), defined for this assessment as having a dissolved-solids concentration between 1,000 and 10,000 milligrams per liter, is an unconventional source of water that may offer a partial solution to current (2016) and future water challenges. In support of the...

Qi, S. and Harris, A. United States Geological Survey

Apr 05, 2017
3 Resources
0 Stars
Publicly accessible

Elevation Grid for top Columbia River Basalt (CRBG) in the Portland Basin used in DDU Feasibility Study

The Portland Basin is a prime location to assess the feasibility of DDU-TES because natural geologic conditions provide thermal and hydraulic separation from overlying aquifers that would otherwise sweep away stored heat. Under the Portland Basin, the lower Columbia River Basalt G...

Bershaw, J. and Scanlon, D. Portland State University

Dec 01, 2018
5 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Core Logs

Core logs and photos from the EGS Collab project Experiment 2 for the Top Vertical well (TV4100) and the Top Horizontal well (TV 4100) on the 4100 Level of SURF (the Sanford Underground Research Facility). The core logs are stored in a single PDF file with 5-ft run intervals. In t...

Dobson, P. et al Lawrence Berkeley National Laboratory

Jul 08, 2019
7 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 7 Next >>