TY - DATA AB - The experimental data obtained in this project is the thermal stability data of various foams measured using the setup established at Temple University during this study. The setup is installed with a portable digital camera which can take images and videos of foam evolution at a given pressure and temperature condition. Consequently, the half-life data was recorded from the images/videos, which are used as a measure of the thermal stability for foams. Over the 3 years of this project, four different surfactants and five different stabilizing agents were studied. The surfactants are, Alfa Olefin Sulfonate (AOS), Sodium Dodecyl Sulphate (SDS), Tergitol (NP-40), and Cetyltrimethylammonium chloride (CTAC). The stabilizing agents are, guar gum, bentonite clay, crosslinking agents, silicon dioxide nanoparticles (60 to 70nm), and graphene oxide dispersions. Foam stability was evaluated at different temperatures between 100C and 200cC, while the foam generation pressure varied between atmospheric pressure (14.7 psi) and 1000 psi. The images are saved as .jpg file and videos are saved as .avi files. AU - Thakor, Viren AU - Ren, Fei AU - Wang, Hong DB - Open Energy Data Initiative (OEDI) DP - Open EI | National Renewable Energy Laboratory DO - 10.15121/1872539 KW - Enhanced Geothermal System KW - Foam Fracturing KW - Foam Stability KW - Half-life KW - Foam KW - media KW - videos KW - images KW - half life KW - test KW - fracturing fluid KW - test footage KW - recordings KW - EGS KW - enhanced thermal systems KW - temperature KW - pressure LA - English DA - 2021/09/15 PY - 2021 PB - Temple University T1 - Experimental Images and Videos of Foam Stability (Half-life) UR - https://doi.org/10.15121/1872539 ER -