Search OEDI Data

Showing results 1176 - 1200 of 1260.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Research Areas
Accessibility
Data Type
Organization
Source
"map file"×
Geothermal Data Repository (GDR)×

The Convergence of Heat, Groundwater, & Fracture Permeability: Innovative Play Fairway Modeling Applied to the Tularosa Basin Project Report

This report details all of the work done in Phase 2 of a geothermal exploration project in Tularosa Basin, New Mexico. Data acquired as part of Phase 2 includes field geology (geological reconnaissance and mapping), gravity surveys, shallow temperature surveys, well water sampling...
Nash, G. et al Energy and Geoscience Institute at the University of Utah
May 31, 2017
1 Resources
0 Stars
Publicly accessible

Mapping Fracture Network Creation with Microseismicity During EGS Demonstrations

This a report for the project "Mapping Fracture Network Creation with Microseismicity During EGS Demonstrations". Effective enhanced geothermal systems (EGS) require optimal fracture networks for efficient heat transfer between hot rock and fluid. Microseismic mapping is a key too...
Templeton, D. et al Lawrence Livermore National Laboratory
Apr 18, 2014
1 Resources
0 Stars
Publicly accessible

Surface Complexation Modeling of Terbium Biosorption onto E. Coli Bacterial Surfaces with Lanthanide Binding Tags

Lanthanide binding tags (LBTs) have been engineered onto native Escherichia coli (E. coli) bacterial surfaces to enhance extraction and recovery of rare earth elements (REEs). Three strains of E. coli were studied: (1) the native E. coli surface, (2) a mutant E. coli surface with ...
Jiao, Y. Lawrence Livermore National Laboratory
Apr 01, 2018
1 Resources
0 Stars
Publicly accessible

2019 Geothermal Market Report Fact Sheet

The 2020 U.S. Geothermal Power Production and District Heating Market Report is being developed by the National Renewable Energy Laboratory and Geothermal Rising, previously Geothermal Resources Council (GRC), with support from the Geothermal Technologies Office of the U.S. Depart...
Robins, J. et al National Renewable Energy Laboratory
Oct 01, 2020
1 Resources
0 Stars
Publicly accessible

Community Geothermal: Thermal Conductivity Test and Data Analysis Report Wallingford, CT

Report on a formation thermal conductivity test that was performed on the geothermal test bore at Ulbrich Heights at 38 Louis Circle Lane in Wallingford, Connecticut. Data are applicable only within the Wallingford region and should not be extrapolated for other climatic and geogr...
Martin, C. Connecticut Department of Energy and Environmental Protection (CT DEEP)
Feb 20, 2024
1 Resources
0 Stars
Publicly accessible

Calculation Tool for Transported Geothermal Energy Using Two-Step Absorption Process

This spreadsheet allows the user to calculate parameters relevant to techno-economic performance of a two-step absorption process to transport low temperature geothermal heat some distance (1-20 miles) for use in building air conditioning. The parameters included are (1) energy de...
Liu, X. et al Oak Ridge National Laboratory
Feb 01, 2016
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3A Year 1 Annual Report for 2020

This is the Utah FORGE annual report for Phase 3A year 1, which was completed on December 28th, 2020. This report includes site infrastructure, site operations, seismic monitoring, a conceptual geological model, outreach, and communications for the Utah FORGE project during Phase ...
Moore, J. et al Energy and Geoscience Institute at the University of Utah
Dec 28, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2565: Evolution of Permeability and Strength Recovery of Shear Fractures Under Hydrothermal Conditions 2024 Annual Workshop Presentation

This is a presentation on the Evolution of Permeability and Strength Recovery of Shear Fractures Under Hydrothermal Conditions by United States Geological Survey, presented by Tamara Jeppson. This video slide presentation, by the USGS, discusses the determination of how thermal, ...
Jeppson, T. et al Energy and Geoscience Institute at the University of Utah
Sep 15, 2024
1 Resources
0 Stars
Publicly accessible

Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report

The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The Project chose the Dixie Valley Geothermal System in Nevada as a field laboratory site for methodlogy calibration...
Iovenitti, J. AltaRock Energy Inc
May 15, 2013
1 Resources
0 Stars
Publicly accessible

Thermal Drawdown Induced Flow Channeling in Fractured Geothermal Reservoirs: Rock Mechanics and Rock Engineering

We investigate the flow-channeling phenomenon caused by thermal drawdown in fractured geothermal reservoirs. A discrete fracture network-based, fully coupled thermal "hydrological" mechanical simulator is used to study the interactions between fluid flow, temperature change, and t...
Fu, P. et al Lawrence Livermore National Laboratory
Nov 15, 2015
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Updated Phase 2C Well Location Coordinates

Utah FORGE has been established to develop, test, and improve the technologies and techniques required to develop EGS-type geothermal resources. Drilling of the first of two deep deviated wells, 16A(78)-32, will begin in the second half of 2020. This well will serve as the injecti...
Hardwick, C. Utah Geological Survey
Dec 07, 2020
1 Resources
0 Stars
Publicly accessible

GRC 2019 Initial Results Presentation

The Report is being developed by NREL and the GRC, with financial support from the Geothermal Technologies Office of the U.S. DOE and the GRC. It is intended to provide geothermal policymakers, regulators, developers, researchers, and other stakeholders with up-to-date information...
Robins, J. National Renewable Energy Laboratory
Oct 01, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Preliminary Report on Development of a Reservoir Seismic Velocity Model

This report describes the development of a preliminary 3D seismic velocity model at the Utah FORGE site and first results from estimating seismic resolution in the generated fracture volume during Stage 3 of the April 2022 stimulation. A preliminary 3D velocity model for the larg...
Gritto, R. Array Information Technology
Jan 30, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2428: Fracture Permeability Impact on Reservoir Stress and Seismic Slip Behavior Workshop Presentation

This is a presentation on the Fracture Permeability Impact on Seismic Slip Behavior project by Lawrence Livermore National Laboratory, presented by Dr. Kayla A. Kroll. The project's objective is to develop, apply and validate a holistic thermal, hydrologic, mechanical, and chemic...
Kroll, K. et al Lawrence Livermore National Laboratory
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Slip and Dilation Tendency Analysis of the Salt Wells Geothermal Area

Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip (slip tendency; Ts; Morris et al., 1996) or to dilate (dilation tendency; Td; Ferrill et al., 1999) provides an in...
E., J. University of Nevada
Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

Slip and Dilation Tendency Analysis of the San Emidio Geothermal Area

Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip (slip tendency; Ts; Morris et al., 1996) or to dilate (dilation tendency; Td; Ferrill et al., 1999) provides an in...
E., J. University of Nevada
Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

Hotspot Project: The Snake River Geothermal Drilling Project Initial Report

The Snake River volcanic province (SRP) overlies a thermal anomaly that extends deep into the mantle; it represents one of the highest heat flow provinces in North America. The primary goal of this project is to evaluate geothermal potential in three distinct settings: (1) Kimama ...
Shervais, J. et al Utah State University
Jan 01, 2012
1 Resources
0 Stars
Publicly accessible

Development of a Neutron Diffraction Based Experimental Capability for Investigating Hydraulic Fractures for EGS-like Conditions

Understanding the relationship between stress state, strain state and fracture initiation and propagation is critical to the improvement of fracture simulation capability if it is to be used as a tool for guiding hydraulic fracturing operations. The development of fracture predict...
Polsky, Y. et al Oak Ridge National Laboratory
Feb 01, 2013
1 Resources
0 Stars
Publicly accessible

3D Model of the McGinness Hills Geothermal Area

The McGinness Hills geothermal system lies in a ~8.5 km wide, north-northeast trending accommodation zone defined by east-dipping normal faults bounding the Toiyabe Range to the west and west-dipping normal faults bounding the Simpson Park Mountains to the east. Within this broad ...
E. Faulds, J. University of Nevada
Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: ArcGIS Data for Geologic Model

Archive of ArcGIS data from the West Flank FORGE site located in Coso, California. Archive contains the following eight shapefiles: Polygon of the 3D geologic model (WestFlank3DGeologicModelExtent) Polylines of the traces 3D modeled faults (WestFlank3DModeledFaultTraces) Polyline...
Sandia National Laboratories
Mar 01, 2016
2 Resources
0 Stars
Publicly accessible

Seedling Project Report: A Novel Heat Pump Integrated Underground Thermal Energy Storage for Shaping Electric Demand of Buildings

This report presents a preliminary assessment of the technical feasibility of utilizing underground thermal energy storage (UTES) and electric-driven heat pumps (EDHPs) to enable flexible behind-the-meter electric demand of buildings while meeting their thermal demands in an energ...
Liu, X. et al Oak Ridge National Laboratory
May 31, 2019
1 Resources
0 Stars
Publicly accessible

GeoThermalCloud framework for fusion of big data and multi-physics models in Nevada and Southwest New Mexico

Our GeoThermalCloud framework is designed to process geothermal datasets using a novel toolbox for unsupervised and physics-informed machine learning called SmartTensors. More information about GeoThermalCloud can be found at the GeoThermalCloud GitHub Repository. More information...
Vesselinov, V. Los Alamos National Laboratory
Mar 29, 2021
4 Resources
0 Stars
Publicly accessible

End Use Load Profile (EULP) of US Building Sector resulting from mass GHP retrofits

This collection of datasets describes the change (difference) in hourly energy consumption of the U.S. residential and commercial building stock while replacing existing HVAC systems with ground source heat pumps for all the balancing areas in the US, for all buildings eligible fo...
Liu, X. et al Oak Ridge National Laboratory
Apr 15, 2023
2 Resources
0 Stars
Publicly accessible

Dynamic Earth Energy Storage: Terawatt-year, Grid-scale Energy Storage Using Planet Earth as a Thermal Battery (GeoTES): Phase I Project Final Report

Final report for the DOE GTO funded research on geologic thermal energy storage (GeoTES), or commonly known as reservoir thermal energy storage (RTES). The results described in this report shed light on various aspects of RTES including project siting, operational performance, m...
Atkinson, T. et al Idaho National Laboratory
Sep 02, 2022
1 Resources
0 Stars
Publicly accessible

Updated Overpressures and Permeability Values for PNNL's StimuFrac Fluid

A corrigendum was submitted to the journal of Geothermics on our article "Environmentally friendly, rheoreversible, hydraulic-fracturing fluids for enhanced geothermal systems" Shao et al Geothermics 58 (2015) 22-31. In the original article some permeability values were underesti...
Shao, H. et al Pacific Northwest National Laboratory
Apr 06, 2016
1 Resources
0 Stars
Publicly accessible
<< Previous434445464748495051Next >>